Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Driveway & Pavers: The Los Angeles Owner’s Guide
We install and repair Unilock driveway and paver systems across Los Angeles, and a full paver driveway installation here typically runs $8,260 – $21,240 depending on square footage, base prep, and whether we’re replacing concrete or asphalt. Most projects are scheduled within days of an approved quote, not months. Groundwork Construction Co. of Los Angeles is an independent service provider and is not affiliated with Unilock.
Owners usually discover a failing paver system the same way. A driveway that drained clean through the first rainy season starts holding water at the garage apron. One or two pavers near a downspout rock when you step on them. Sand joints wash out along the street edge after a storm. Or a hairline crack shows up in the same course every spring, no matter what you patch it with. Each of those symptoms points to a specific failure in the base, the bedding layer, or the joint system, and each one has a different fix.
Which Unilock Models This Applies To
Unilock paver lines are not interchangeable. EnduraColor is a surface technology applied across several product families, not a single paver, so a replacement course has to match both the family and the color series. Brussels Block, Beacon Hill, Umbriano, Treo, and Thornbury each carry their own thickness tolerances, chamfer profiles, and laid dimensions. A 60mm Brussels Block won’t sit flush against an 80mm Umbriano in the same driveway without a visible step at the transition.
To identify what you have, measure a paver face in inches (a tape across the long edge is enough), check thickness at an exposed edge near the street or a step, and note whether the surface has a smooth matte finish (Umbriano) or a tumbled, textured face (Brussels Block or Thornbury). Most homeowners can tell OEM from aftermarket by weight alone: genuine Unilock units are dense and consistent, while cheaper lookalikes in the same nominal size often run lighter and chalky at the edges. If you’re matching a discontinued colorway, don’t guess from a photo. Pull a full paver out and bring it with you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Driveway & Pavers Is Failing
- Ponding at the garage apron or driveway crown. Water pooling in the same low spot after every rain usually means the base settled unevenly or the original slope drained toward the house. In Los Angeles, clay-heavy soils under the San Fernando Valley and Hollywood Hills areas expand and contract hard through the dry season, and a base that wasn’t compacted in lifts will move.
- Loose or rocking pavers near downspouts and irrigation heads. Rocking means the bedding sand has migrated out from under the unit. Constant moisture from a downspout dumped onto the same spot is the most common cause we see, and it will spread course by course if the joint sand isn’t replenished.
- Joint sand washing out along the street edge. Street-edge scour comes from sheet flow off the road plus the runoff from your own driveway, and it strips polymeric or plain sand joints faster than anywhere else on the system. Once the joints open, water gets into the base and the failure accelerates.
- Efflorescence (white mineral haze) that keeps returning. White bloom on the paver face is salts migrating to the surface as moisture moves through the unit. It’s cosmetic, but when it returns after every cleaning, moisture is trapped under the pavers, which points to drainage.
- Cracked pavers in the same course every year. A repeated crack in one line of pavers usually means a point load underneath: a settled utility trench, a tree root, or a base transition. Patching the paver without fixing the base underneath just resets the clock.
Replacement Cost & What’s Included
In Los Angeles, a paver driveway installation runs $8,260 – $21,240 installed. A single-course or localized repair (lifting, re-bedding, and re-sanding a section) is priced well below that range, and we quote it line by line so you see material, base work, disposal, and labor separately. A paver patio installation runs $4,130 – $12,980. Driveway sealing, which protects the joints and surface across LA’s UV load, runs $295 – $825.
What drives the range: square footage, how much base has to be excavated and re-compacted, whether the existing concrete or asphalt has to be demolished and hauled, edge restraints, and traffic-rated thickness for a driveway versus a walkway. Every project we do is covered by the 730-Day Done Right Promise, and pricing is upfront with no change orders. Every project also carries the $1,000 off on jobs over $10,000 and 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s real work a homeowner can do here without risk. Clearing debris from joints, sweeping sand back in, rinsing efflorescence with the right cleaner, and photographing the failed area with a tape measure in frame all help whoever does the repair. Resetting a paver on a sound base is within reach for a careful owner.
Where DIY goes wrong is the base. If a paver is rocking or the driveway is ponding, the fix isn’t the paver, it’s what’s underneath, and a shallow patch over a moving base will fail again by the next rainy season. The safest approach is diagnosis first. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and calls are answered by a live person, 24/7. Call (888) 427-1733 for a free estimate.
FAQs
A properly installed Unilock paver driveway typically lasts 25 to 50 years, and the pavers themselves often outlast the base and joints underneath them. The realistic failure point in Los Angeles is the sand joint and the base, not the paver. Under the region’s UV load and dry-season soil movement, the base and joints are what get serviced. Call (888) 427-1733 for an exact quote. Estimates are free.
Yes, in most cases a localized repair is the right answer. If the pavers are sound and the failure is confined to one area, we lift, re-compact the base, re-bed the units, and re-sand the joints. A full replacement makes sense when the base has failed across the whole driveway or the slope drains toward the house. Call (888) 427-1733 and we’ll tell you which one you’re looking at.
A localized repair is usually a one-day job. A full paver driveway installation generally runs several days to a week or more, depending on square footage, demolition, and base work. We schedule ahead and give you a written timeline before we start. Call (888) 427-1733 for a free estimate.
We source through verified brand partners and match your existing family, color series, and thickness so the new course sits flush. If your colorway has been discontinued, we’ll tell you upfront and price the closest match so there are no surprises. Call (888) 427-1733 and we’ll walk through options. We also work with KraftMaid, Cambria, and Silestone on interior projects.
Get Your Unilock Driveway Priced in Los Angeles
If your Unilock driveway is ponding, rocking, or losing joint sand, we’ll diagnose the actual cause before quoting anything. You’ll get a written, line-item estimate, upfront pricing with no surprises, and the 730-Day Done Right Promise behind the work. Call Groundwork Construction Co. of Los Angeles at (888) 427-1733 for a free estimate, and a live person will pick up.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.