A Groundwork company - serving Los Angeles, CA

Unilock Fence Installation in Los Angeles, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Fence Installation: The Los Angeles Owner’s Guide

Unilock fence installation in Los Angeles typically runs $4,130 to $10,620 installed, depending on linear footage, wall height, and whether the run is a freestanding privacy wall or a retaining wall carrying grade. We install Unilock-compatible segmental block fencing, we quote a fixed number in writing before anyone touches your property, and every job is covered by our 730-Day Done Right Promise. Groundwork Construction Co. of Los Angeles is an independent provider and is not affiliated with Unilock.

Call (888) 427-1733

Owners usually discover a failing fence wall the same way: a hairline crack opens along a mortar joint after a hot week, one course starts leaning away from plumb, or a block face spalls and leaves a rough pit where the finish used to be. In Los Angeles, the pattern often starts at the base. Our clay soils expand and contract hard with the wet-dry cycle, and a footing poured too shallow or without proper drainage shows its first symptom right at the soil line within a few seasons.

Key Takeaways

  • Installed Unilock-compatible fence pricing in Los Angeles lands between $4,130 and $10,620 for most residential runs.
  • Most failures we open up trace back to the footing and drainage, not the block itself.
  • We quote line items in writing and the number you see is the number you pay.
  • Live person on the phone 24/7, background-checked and uniformed technicians on the job.

Which Unilock Models This Applies To

Unilock’s retaining and freestanding wall systems cover a lot of ground, and the block models most often used for fence and privacy walls in Los Angeles are the pinned segmental systems and the tumbled, more traditional-looking units. Pinned systems interlock course to course with fiberglass or polymer pins and stack to code height without mortar. Tumbled units look like old-world stone and typically cap with a matching coping piece.

The compatibility gotcha that trips homeowners up is the pin and the cap. Pin lengths vary by system and by whether the wall is straight or curved, and a cap from one line usually won’t seat cleanly on the block of another. Before we quote, we identify the system by photo, block dimensions, and whether pins are present, then confirm the matching cap and pin set. OEM block and cap keep the finish and dimensional fit consistent; a quality aftermarket block can cost less but ushers in a color and texture mismatch that shows at every course line once the sun hits it.

Look for the manufacturer’s stamp or molded mark on a block face, count the courses, and measure one block end to end. That’s usually enough for us to pin down the line. When the original block is discontinued, we match as closely as we can on dimension and tone and tell you up front where the blend may read differently.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Fence Installation Is Failing

  • Stepped or stair-step cracking along the joints. This usually means the footing has settled unevenly or the base wasn’t compacted in lifts. It rarely stops on its own once it starts.
  • A lean away from plumb at the top of the wall. The base course has shifted, often because water is running behind the blocks with nowhere to go. Poor drainage is the most common cause we find in Los Angeles yards.
  • Spalling or pitting on the block face. Freeze isn’t the culprit here. Salt air near the coast, irrigation overspray, and sun-driven thermal cycling wear the finish over time.
  • Loose or missing pins between courses. Pins work as the wall’s structural link. Without them, the wall is just stacked block waiting for the next ground movement.
  • Weeds, silt, or standing water at the base. That’s a drainage failure, and it accelerates everything above it. Water pooling behind the wall builds hydrostatic pressure with every rain.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Most Unilock fence and wall work in Los Angeles runs $4,130 to $10,620 installed. The range is driven by linear footage, wall height, whether grade changes require a retaining design, how much of the existing footing has to come out, and whether the site needs drainage correction behind the wall. Straight-run privacy walls at modest height sit at the low end; taller runs with grade and drainage work land higher.

Our quote is line-item: demo and haul-off, footing and base, block, pins and cap, drainage, and labor are each written out. No-hassle upfront pricing means the number you see is the number you pay, and change orders only happen if you approve the scope change in writing. The 0% financing for 18 months and $1,000 off projects over $10,000 apply here when your project qualifies, and the free project estimate and design consult is where all of this gets nailed down.

Every wall we install carries the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. Built to last, backed in writing.

DIY or Call Us?

There’s real value in checking before you spend. You can safely photograph the wall from both sides, note where cracks start and how wide they are, slide a tape against the block to confirm dimensions, look for the manufacturer mark, and check whether water drains away from the wall base after a rain. Measuring a crack against a coin or a ruler gives us something concrete to work from.

Where DIY goes wrong is the rebuild itself. A wall that leans or cracks has a footing problem, and restacking block on a bad base just buys you another failure in a season or two. Pins that get omitted, base gravel that isn’t compacted in lifts, a drainage plane skipped to save a day: each shortcut shows up within a year on clay soil. Footing depth and wall height also carry code requirements, and a poorly built retaining wall can shift, settle, or lean onto a neighbor’s property. A background-checked, uniformed crew with up to 12 years of experience gets this right the first time. Call (888) 427-1733 and we’ll take a look.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch