A Groundwork company - serving Los Angeles, CA

Unilock Home Additions & ADU in Los Angeles, CA

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Home Additions & ADU: The Los Angeles Owner’s Guide

If you’re pricing a Unilock-compatible home addition in Los Angeles, plan on $53,100 – $153,400 installed, and a Unilock-compatible ADU at $106,200 – $259,600. These are planned builds, not same-day work: design, permits, and construction take months, not hours. What owners usually hit first is the structural wall system tied to a Unilock block or panel spec that a previous contractor used: hairline step cracks that widen by the season, a floor that feels hollow or bouncy near a doorway, or stucco that pulls away from the wall at an outside corner. Those are the calls we get most in Los Angeles, and they’re the reason we start with the foundation and the wall spec before anything cosmetic.

Call (888) 427-1733

Which Unilock Models This Applies To

Unilock is best known in Southern California for hardscape: pavers, retaining wall block, and steps. When a home addition or ADU project specifies Unilock, it’s usually for the retaining wall that holds the pad, the steps up to the entry, or the paver hardscape around the structure. That matters for matching parts. Wall block lines differ by face dimension, depth, setback, and whether they use a pin-and-channel connection or a lip system. A retaining block that reads the same on the face can be a full inch different in depth, and that changes the wall’s design or engineering. Look for the block name stamped on the back of a loose unit, or measure the face width, height, and depth to the nearest eighth of an inch. We match by those measurements plus the wall’s height and soil conditions, not by a photo of the color.

On additions and ADUs, the big decision is engineered vs. catalog. Above roughly 4 feet of retained soil, or under a driveway or slab, you need an engineered system with specified geogrid, not a standard tread block stacked higher. That’s where cheap substitutions go wrong. We source the right block for the engineered design, and where a matching unit isn’t available, we’ll show you the aftermarket equivalent and say plainly how it differs. We’re an independent contractor, not affiliated with Unilock, so you get an honest fit check.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Home Additions & ADU Is Failing

  • Stair-step cracks in the wall face: Caused by settlement under the base or missing geogrid. Once a crack opens wider than a credit card’s edge, the wall is telling you it isn’t stable.
  • Leaning or bowing wall: Often a blocked or missing drain behind the wall. Water pressure builds with each winter rain in Los Angeles and pushes the wall out.
  • Hollow or bouncy floor near a doorway: Usually a subfloor or footing issue where the addition meets the original structure. It gets worse with the seasonal shrink-swell of our clay soils.
  • Stucco pulling away at a corner: Movement between the new wall and the existing house. That’s a connection detail that wasn’t built to handle settlement.
  • Pavers shifting and pooling water against the new slab: A failed base and edge restraint. Poor drainage against an addition foundation can lead to water intrusion inside the ADU.

Any of these on a structure where people sleep is a stop-and-call item. Shoring a failing wall or footing is genuinely dangerous work, and we’ll say that plainly up front.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Repairing a failing wall system and footing on a Los Angeles addition typically lands inside the home addition range of $53,100 – $153,400. A standalone Unilock ADU build runs $106,200 – $259,600, and converting a garage to a living unit is $35,400 – $94,400. What drives the number: retained wall height, how much foundation and footing work is needed, and permit scope. We give upfront pricing with a written line-item quote: the number you see is the number you pay, with no change-order games. Every build is covered by our 730-Day Done Right Promise. For projects over $10,000, take $1,000 off, and 0% financing is available for 18 months. Estamos happy to show exactly where each dollar goes, from foundation to finish line.

DIY or Call Us?

You can safely do three things: photograph and measure any loose block or wall face, note where cracks and water pooling show up, and check the visible base and drainage at the wall foot. What you should not do is re-stack a retaining wall, dig against a footing, or shore up a sagging floor. A wall that’s been holding back soil and water is under load, and moving the wrong block can bring it down on you. That’s not a project for a Saturday; it’s a load-bearing decision. Our technicians have up to 12 years of experience, we pull the permits and pass the inspections, and calls are answered by a live person 24/7. Call (888) 427-1733 for a free estimate.

FAQs

How long does a Unilock-compatible addition or ADU last in Los Angeles?
With a properly drained, engineered base and correct geogrid, a block retaining wall holds up for decades, and the structure itself is built to the same life span as any Los Angeles home. The failure point is almost always drainage, so we design the wall to shed water, not trap it against clay that swells in the wet season. Call (888) 427-1733 for an exact quote, and estimates are free.

Can it be repaired instead of rebuilt?
Sometimes. A short wall under 4 feet with minor settlement can often be reset and re-drained without a full rebuild. A wall that has leaned, stepped, or pulled away from the footing usually needs partial reconstruction. We’ll tell you which one you’re facing after we look. Call (888) 427-1733 to schedule that look.

How long does the work take?
A footing and wall repair is typically days to a few weeks of active construction; a new addition or ADU is a months-long build with design and permits up front. We give you a real schedule, not an optimistic one. Call (888) 427-1733 to talk through your timeline.

How do you source the part for my specific model?
We identify the block or panel by stamped name and face measurements, then match the engineered spec, not just the color. If a matching unit is unavailable, we’ll show you the closest aftermarket equivalent and explain the difference before you commit. Call (888) 427-1733 to start.

We also work with KraftMaid, Cambria, and Silestone on the interior side of addition projects, so one contractor sees it through from foundation to finish line. Ready to price it? Call (888) 427-1733 for a free estimate, take $1,000 off projects over $10,000, and ask about 0% financing for 18 months. Built to last, backed in writing.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch