Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Los Angeles Owner’s Guide
We install Wellborn-compatible driveway and paver systems across Los Angeles, and a full paver driveway typically runs $8,260 – $21,240 installed, while a concrete driveway replacement lands at $5,310 – $14,160. Wellborn hardscape products are sold through dealer and distribution channels, so availability depends on the current product line and your project’s spec rather than on a warehouse we keep. Most Los Angeles owners discover the failure the same way: a sunken corner where the car tire sits, sand pushing up through the joints after a rain, or a pop in the paver field during a hot September afternoon in the Valley. Once those start, the base under the surface has usually already moved.
Which Wellborn Models This Applies To
Wellborn’s hardscape line is specified by product family and finish, not by a model number stamped on a single piece the way an appliance would be. What matters is the surface profile, thickness, and color/finish series tied to the original install. The reliable way to identify what you have is to pull one paver from a corner or a low-visibility edge and read the underside or edge stamp, then match that against the product spec the installer used. If you don’t have that paperwork, the paver itself is the identifier. On a full driveway replacement, we can also spec a compatible profile from the current Wellborn line rather than chase a discontinued finish, which is usually the better call on a Los Angeles property where sun exposure and drainage matter more than an exact color match. OEM-original pieces make sense when you’re patching a small area and want the field to read as one surface. For larger sections, a current-line equivalent at the same thickness and format is a fine choice and often easier to source. We’re an independent service provider, not affiliated with Wellborn, so we specify and install to your project rather than to a single brand program.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
By the time a paver surface looks wrong, the layers beneath it have usually been working against each other for a season or two. These are the symptoms we see most in Los Angeles.
- Sunken or heaved sections. A dip under a tire path or a lifted hump means the compacted base has settled unevenly or the subgrade wasn’t prepped to handle our shrink-swell clay soils. On hillside lots in Echo Park and Silver Lake, that shows up faster on the downhill side.
- Sand washing out of the joints. Polymer or joint sand migrating after a rain points to drainage running across the field instead of off it. Los Angeles’s short, intense winter storms expose this quickly, and once the joints open, the pavers start to rock.
- Loose or rocking pavers. A paver that moves underfoot has lost its bedding layer. Left alone, the movement grinds the edges and spreads to neighboring units within a few months.
- Efflorescence and chalky white bloom. Mineral salts wicking to the surface are a sign water is moving through the slab or paver bed. In Los Angeles it’s often the first visible clue that the base isn’t draining.
- Edge restraint pulling away or cracking. The border holding the field in place is the part that fails first on most driveways. When the edge gives, the whole surface starts to spread, and that’s usually what sends an owner looking for a fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing depends on square footage, base condition, and whether we’re patching or replacing the full driveway. Here’s what Los Angeles homeowners typically see, all installed with materials, base prep, compaction, edge restraint, and cleanup included.
| Service | Typical Installed Range (Los Angeles) |
|---|---|
| Paver driveway installation | $8,260 – $21,240 |
| Concrete driveway installation | $5,310 – $14,160 |
| Asphalt driveway paving | $4,130 – $10,620 |
| Driveway replacement | $5,900 – $16,520 |
| Driveway sealing | $295 – $825 |
| Paver patio installation | $4,130 – $12,980 |
What pushes a project toward the top of the range is base removal and haul-off, hillside grading, and drainage corrections like channel drains or a regraded slope away from the foundation. What keeps it at the low end is a sound existing base and a straightforward rectangular layout. We price upfront with no surprises, so the number you see is the number you pay. Every driveway and paver job we install is covered by the 730-Day Done Right Promise, and we pull the permits where the City of Los Angeles requires them.
DIY or Call Us?
Some checks are safe and useful to do yourself. Walk the field and mark rocking pavers, hose the surface and watch where water pools, look at the edge restraint for cracks, and photograph the joint sand after a rain. What goes wrong is the repair. Re-lifting pavers and re-bedding them without restoring the compacted base just kicks the failure down the road, and a driveway that’s holding up a car is not the place to learn base prep. There’s no tensioned spring or live wire here, but a poorly rebuilt base can undermine a garage slab or send runoff toward the house. If your surface is moving, sunken, or washing out, call (888) 427-1733 and we’ll take a look before you spend a weekend on it.
FAQs
A properly installed paver driveway should hold up 25 to 30 years or more in Los Angeles, but the surface material isn’t what fails first; the base does. Our dry summers and short, heavy winter rains stress the base and drainage more than the pavers themselves, so getting the subgrade and slope right at install is what determines the lifespan.
Often yes, if the failure is isolated to a small section and the surrounding field is still stable. A local repair means pulling the affected pavers, correcting the base and drainage under that area, and resetting to match. If more than a third of the field is rocking or sunken, spot repairs tend to chase the problem and a full replacement usually costs less over time. Call (888) 427-1733 and we’ll tell you honestly which side of that line your driveway is on.
Most single-driveway replacements run three to five working days once materials are on site, with base prep and compaction taking the longest. Larger fields, hillside grading, or drainage corrections add days. We give you a schedule in the written estimate and stick to it.
We source through Wellborn’s dealer and distribution channels to match your product family, thickness, and finish, or we spec a current-line equivalent when a finish has been discontinued. We don’t claim to stock parts; we order to your project spec, which is the honest way to get a match on a Los Angeles install. We also work with Belgard and other trusted brand partners across our driveway and paver work, plus KraftMaid, Cambria, and Silestone for the interior side of a whole-home project.
If your Wellborn driveway or paver surface is showing any of these signs, the smartest next step is a free, no-pressure estimate. We’ll walk the driveway with you, explain what’s actually failing, and give you a written, upfront price with the 730-Day Done Right Promise behind the work. Live people answer at (888) 427-1733 around the clock, and you can book your free estimate and design consult today.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.