A Groundwork company - serving Los Angeles, CA

Wellborn Kitchen Remodeling in Los Angeles, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Wellborn Kitchen Remodeling: The Los Angeles Owner’s Guide

We install Wellborn-compatible kitchen remodeling in Los Angeles, with cabinet and millwork projects typically running $16,520 – $53,100 installed. The most common thing owners call us about isn’t the cabinets themselves. It’s a failing hinge, a soft-close drawer that stopped closing softly, or a door that’s drifted out of alignment after a decade of daily use. Wellborn cabinets are built to a solid standard, but in Los Angeles homes the wear shows up faster than owners expect: coastal humidity in Santa Monica and Venice swells wood, while the dry heat of the San Fernando Valley and the inland basin shrinks and dries it. When a hinge arm bends or a soft-close damper quits, it usually announces itself as a door that won’t sit flush or a drawer that slams. That’s when the calls start.

Call (888) 427-1733

Key Takeaways

  • Wellborn-compatible kitchen remodeling in Los Angeles: $16,520 – $53,100 installed.
  • Most single-part fixes (hinges, dampers, alignment) are handled in a single visit.
  • Wellborn uses several hinge and glide patterns across its lines – the part must match the series, not just the look.
  • Every job is covered by our 730-Day Done Right Promise.

Which Wellborn Models This Applies To

Wellborn cabinet lines don’t share one universal hinge or drawer glide. The hardware you need depends on which series and door style you have, and the pattern changed across production years. Before we touch anything, we check the brand stamp inside the cabinet door or on the back of a drawer box – Wellborn marks its boxes, and that stamp (plus the door style name) is what tells us the right replacement pattern. A soft-close concealed hinge that fits one door style may have a different mounting cup diameter than another, so two cabinets that look identical can take different parts.

Your two realistic paths are OEM Wellborn hardware or a quality aftermarket equivalent. OEM is the surest match for a discontinued door style or a cabinet still under its finish warranty. A quality aftermarket hinge or glide can cost less and perform just as well if the mounting pattern and cup depth line up. The mistake we see is a homeowner buying the first “soft-close cabinet hinge” online and finding the screw holes don’t line up with the pre-drilled pattern. Measure the existing part – cup diameter, mounting-hole spread, arm length – before you order. If you’re comparing cabinet brands while you’re at it, Wellborn sits alongside KraftMaid, and for stone surfaces we work with Cambria and Silestone. Groundwork Construction Co. of Los Angeles is an independent service provider, not affiliated with Wellborn.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Wellborn Kitchen Remodeling Is Failing

  • Doors that won’t stay closed or sit flush. A bent hinge arm or a stripped mounting screw has let the door drop out of plane. Left alone, the screw hole in the cabinet frame enlarges and the fix gets bigger.
  • Soft-close drawers that slam. The damper inside the glide has worn out. It’s a small part, but a slamming drawer is the early warning that the glide itself is next.
  • Wobbly or rubbing drawers. The drawer box has come out of square or the glide has worn. In older Los Angeles homes we often find the cabinet frame itself has shifted with seasonal wood movement.
  • Peeling edge banding or lifting veneer. Moisture from a nearby sink or dishwasher line exposes the core. This is common in beach-adjacent kitchens where humidity swings hard.
  • Cracks at the cabinet seams or a door that drags on the frame. Heat and dry air in valley homes dry the wood and open the joints. Catching it early is a hardware-and-alignment job; waiting turns it into a cabinet replacement.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Wellborn-compatible kitchen remodeling in Los Angeles runs $16,520 – $53,100 installed, and a small kitchen remodel lands at $10,620 – $23,600. If you’re replacing cabinets and hardware, cabinet installation alone is $4,720 – $15,340. What pushes a job toward the top of the range is the cabinet count, the door style (raised panel and specialty finishes sit higher than flat slab), and whether the layout moves. A straight hardware-and-alignment job sits near the bottom; a full Wellborn re-face or new cabinet run with countertop and backsplash climbs.

Countertop installation runs $2,360 – $7,670, backsplash $945 – $2,950, and a kitchen island $3,540 – $11,800 if you’re adding one. We write a line-item quote so you see hardware, labor, and materials separately – upfront pricing, no surprises. The work carries our 730-Day Done Right Promise, so if a hinge we set fails or a door we hung drifts, we come back and make it right.

Scope Installed range
Full kitchen remodel $16,520 – $53,100
Small kitchen remodel $10,620 – $23,600
Cabinet installation $4,720 – $15,340
Countertop installation $2,360 – $7,670
Backsplash installation $945 – $2,950
Kitchen island installation $3,540 – $11,800

DIY or Call Us?

If a single hinge is loose, tightening a screw and adjusting the door is a safe job for an owner. If the screw hole is stripped, a wood screw and a bit of toothpick or wood glue can get the bite back. That’s the reasonable DIY line.

Where it goes wrong: matching the wrong hinge or glide pattern, over-tightening a soft-close damper until it fails again within weeks, or hanging a heavy raised-panel door on one set of screws that wasn’t sized for it. None of that is dangerous, but it’s how a $30 part turns into a $300 repair. On a full cabinet run or a re-face, the measuring is what separates a clean install from a crooked one. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and answer calls with a live person 24/7. Call (888) 427-1733 and we’ll tell you straight whether it’s a hardware fix or a bigger job.

FAQs

How long do Wellborn cabinet hinges and glides last in Los Angeles? Most Wellborn soft-close hinges and drawer glides run roughly 10 to 15 years under daily use, and Los Angeles humidity swings on the west side can shorten that. Dry inland heat dries the wood and stresses the mounting points; coastal moisture swells it. A quality replacement resets that clock. Call (888) 427-1733 for an exact quote – estimates are free.

Can a failed Wellborn hinge or glide be repaired instead of replaced? Sometimes. An out-of-alignment door that only needs the hinge adjusted is the cheapest fix, and a soft-close glide with one failed damper can occasionally be repaired. A metal arm that’s bent or a glide body that’s cracked needs replacing, not bending back. We check on site and only recommend a swap when repair won’t hold.

How long does the swap take? A hardware and alignment job on a handful of cabinets is usually done in a single visit. A larger cabinet or re-face project is scheduled across the days the scope needs, and we tell you the timeline in the written quote before work starts.

How do you source the right Wellborn part? We identify the series and door style from the stamp inside the cabinet, measure the existing hinge cup and glide, and match to the correct OEM pattern or a quality equivalent. That stops the guesswork and the wrong-part returns. Call (888) 427-1733 to schedule your free estimate and we’ll confirm the match before anything is ordered.

From foundation to finish line, Groundwork Construction Co. of Los Angeles handles Wellborn-compatible cabinet and kitchen work across Los Angeles – from a one-visit hardware fix to a full remodel. New project? Take $1,000 off projects over $10,000, use 0% financing for 18 months, and start with a free estimate and design consult. Call (888) 427-1733 to schedule yours today.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch