A Groundwork company - serving Los Angeles, CA
Groundwork Construction Co. of Los Angeles construction team

Chain Link Fence Cost Per Foot in Los Angeles - Free On-Site Quote, HOA Approval Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Chain Link Fence Cost Per Foot in Los Angeles: Three Price Tiers, Not One

Chain link fence cost per foot in Los Angeles runs from about $14 to $26 per linear foot installed for a standard residential boundary fence, $22 to $38 per foot for commercial-grade Valley industrial work, and $28 to $52 per foot for hillside slope-stabilization and post-fire erosion-barrier fencing. Most projects land between $4,130 and $10,620 total. The dollars swing that wide because chain-link in LA isn’t one product – it’s three different jobs with different posts, different gauges and different permit paths. Call (888) 427-1733 and we’ll tell you which tier your property falls into before anyone shows up.

Why LA Chain-Link Isn’t Just Schoolyards and Storage Yards

After the 2018 Woolsey and 2020 Bobcat fires, thousands of slope-adjacent homeowners needed erosion-barrier fencing in a hurry. Chain-link became the default material for that work, and not because it was cheap. Its open weave lets water and fine debris pass through instead of damming up behind a solid panel and failing under hydrostatic pressure. Vinyl and wood can’t do that. A fence that holds back a debris flow becomes the debris flow when the next storm hits.

That reality runs headlong into LA’s seismic and fire-zone rules, which already govern nearly every remodel and addition here. On fire-scarred hillsides, fencing stops being a cosmetic boundary and becomes part of the drainage and slope story. If you’re on a slope above a house, it’s a safety system.

So the $20-per-foot average you’ll read in national guides is a starting reference, not a quote. Here’s how the three tiers actually break down.

Los Angeles Chain-Link Cost Tiers by Application

Application Spec Cost per linear foot
Residential boundary fence (flat-lot basin neighborhoods like Reseda, Northridge, Canoga Park) 11.5-gauge galvanized, 4-foot height, standard posts $14-$26
Commercial / industrial boundary (Valley industrial corridors) 9-gauge, 6-foot height, heavier line posts $22-$38
Hillside slope stabilization / post-fire erosion barrier Driven posts, tension wire reinforcement $28-$52
Coastal upgrade (Santa Monica, Playa del Rey, Venice) Vinyl-coated wire for 20-year service life Add $4-$8

The residential tier is what most flat-lot homeowners are shopping for. A standard 11.5-gauge galvanized fence at four feet handles a windy side yard or a rear boundary in a basin neighborhood without drama. Move to a commercial corridor and you’re into 9-gauge wire at six feet, with heavier posts set deeper because the fence is holding a real perimeter and taking gate traffic.

The hillside tier is where the cost gap opens up. Driven posts and tension wire reinforcement do more work than standard residential hardware, and the engineering follows the slope, not a flat-line average.

The Coastal Marine Layer Changes the Spec

Standard galvanized chain-link is fine inland. Out by the water it isn’t. Within roughly 1 to 1.5 miles of the coast – Santa Monica, Playa del Rey, Venice – we specify vinyl-coated chain-link if you want the fence to last 20 years. Salt air eats bare galvanized wire faster than most homeowners expect, and a “cheap” install that rusts out in eight years costs more than doing it right once.

That coastal upgrade adds $4 to $8 per linear foot in material. It’s the single most common specification gap we see on bids from contractors who aren’t used to working near the water.

Whether you’re inland or coastal, our Fence Installation crews walk every property before pricing, so the wire spec matches the salt exposure.

The LA Hillside Permit Trigger That Rescues Your Budget in Advance

This is the part generic cost guides skip entirely. Fences on slopes steeper than a 5:1 grade inside the City of Los Angeles require a grading permit regardless of material. Chain-link is not exempt. On top of that, driven-post installations on hillsides may require a soils report if the parcel sits in a Restricted Use Zone under the City’s Hillside Ordinance.

Those two requirements are where budgets quietly blow up on hillside parcels. A homeowner gets a fence bid, then discovers the permit and soils work were “if required” contingencies nobody told them about. We build the permit and inspection cost into a fixed line item in our upfront pricing, because on a hillside parcel in LA it is almost always required. The number you see is the number you pay.

From top-tier brand partners to tested fasteners, we’ve got the material side handled. On the hillside jobs we line up the soils work and the permit before a single post is driven. That’s the same home construction discipline we bring to every trade we run, from foundation to finish line.

What Moves Your Per-Foot Number

Before you compare two fence bids, know what’s actually driving the difference:

  • Gauge: 11.5-gauge residential wire is lighter than 9-gauge commercial wire. Same height, different lifespan.
  • Post spacing: standard is 8 to 10 feet. Hillside and wind-exposed runs tighten that up.
  • Height: four feet is residential standard; six feet pushes you into commercial territory.
  • Coastal coating: vinyl-coated wire where salt air is a factor.
  • Tension wire reinforcement: non-negotiable on slope stabilization and post-fire barriers.
  • Permit and soils scope: the line item that separates a real bid from a floor quote.

Our technicians have up to 12 years of experience, and every one is background-checked and arrives in uniform. That matters when a crew is working a steep slope behind your house where the last thing you want is someone learning on the job.

How Groundwork Prices the Work

No-hassle upfront pricing is the whole point of how we bid. You get one number for your specified fence, including the grading permit and inspection where the slope triggers it. Every install carries the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s a two-year workmanship guarantee on a fence most homeowners expect to never think about again.

Call us any hour and a live person answers, 24/7. No voicemail black holes, no waiting until Monday for a callback on a fence you’re trying to get up before rainy season. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available on larger scopes. The free project estimate and design consult costs you nothing and gives you a real per-foot number for your property.

FAQs

Get a Real Per-Foot Number for Your Property

National averages won’t tell you whether your fence needs 11.5-gauge or hillside-driven posts with a soils report attached. Groundwork Construction Co. of Los Angeles prices the whole job upfront, permit included, backed by a 730-Day Done Right Promise. Call (888) 427-1733 for a free estimate and design consult – and get your numbers straight before the next storm cycle.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles, CA.

What Our Customers Say

★★★★★ 4.8 from 4+ reviews

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

- Keisha Robinson

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

- Dev Sharma

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

- Robert Sullivan
Need Construction help in Los Angeles? Licensed & insured · free written estimates
Call (888) 427-1733

Request a Free Estimate

Tell us what's going on in Los Angeles. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch