Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in San Fernando: What to Expect
Concrete driveways and concrete work in San Fernando typically run $4,500 – $12,000 for a new driveway pour, with most residential jobs finished in 3 – 5 working days plus curing time before you park on it. A full driveway replacement lands at $5,000 – $14,000, and flatwork like walkways or patios scales from there by square footage. Every job goes through City of San Fernando plan check and inspection, and we hand you a written line-item quote before anything gets torn out. Call (888) 427-1733 for a free on-site estimate.
How a Concrete Job Actually Runs, Day by Day
Most contractors wave a hand and say “we handle everything.” Here’s the real sequence so you know what you’re paying for and when you need to make a decision.
Stage 1: Site visit and layout (day 1, about an hour)
We measure the existing slab, check slope and drainage away from the foundation, and look at what’s underneath – old base, tree roots, failed subgrade. You decide the width, the finish, and whether the old slab gets a full tear-out or a partial. This is the visit where we flag anything that will change the number, before you’re committed.
Stage 2: Permit and utility locate (3 – 10 business days)
In San Fernando, driveway work that touches the public right-of-way or changes grade usually requires a permit through the city’s own building department, and that’s a different counter than LA County or City of LA. We pull it, and we call for utility marking before anyone puts a shovel in the ground. You sign the permit application and pick a pour window.
Stage 3: Demo and grading (day 1 of construction)
We break out the old concrete, haul it off, and cut the subgrade to depth. Base rock goes down in lifts and gets compacted – a driveway needs 4 – 6 inches of compacted base under a 4-inch slab for typical residential cars, more if you park a truck or RV. This is where a cheap job shows its seams: no compaction, no rebar, and you’ll be calling someone else back in three years.
Stage 4: Forming, rebar, and pour (day 2)
Forms get set to the slope you approved, rebar or mesh goes in on chairs so it sits mid-slab, and we pour. Control joints get cut within 24 hours – that’s what keeps the cracks where you want them instead of spiderwebbing across your driveway. You’ll want to be around to confirm the finish before the concrete sets, because after that it’s permanent.
Stage 5: Cure and cleanup (3 – 7 days)
Concrete needs about 7 days to reach workable strength and around 28 days to fully cure. We keep traffic off it, wash the site down, and walk you through the finished job. You decide on any sealing schedule at this point. Full demolition and pour timelines stretch in winter when the valley cools and moisture slows the set.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Options You’ll Choose Between
- Standard broom-finish concrete: the everyday choice, and it’s tough to beat for grip in a hot, dry climate. It hides tire marks well and stays cooler underfoot than darker finishes. It’s the budget-friendly end of the range and the one most San Fernando homeowners pick.
- Exposed aggregate: pebble surface that grips well and doesn’t show dust. It costs more per square foot and it’s harder to patch if a section ever fails, so it suits homeowners who plan to stay put.
- Colored and integral-dye concrete: pigment mixed through the slab rather than painted on top, so it won’t peel in the valley sun. Better-looking curves and borders, higher cost, and the color darkens slightly as it cures.
- Slab depth: 4 inches handles a sedan or SUV fine. If you park a work truck, boat, or RV, we go to 5 – 6 inches with heavier rebar – more material, more cost, longer life under load.
- Sealing: a penetrating or film-forming sealer runs $250 – $700 for a typical driveway and needs refreshing every couple of years. It slows UV fading and helps with oil stains, but it doesn’t fix a bad pour underneath.
We can pull in products like Sakrete for small repairs and patching where a mix-in-place approach makes sense. For a larger pour, ready-mix from a local batch plant is the right call, and we’ll tell you which one your job needs and why.
What Concrete Driveways & Concrete Work Costs in San Fernando, CA
Plan on $4,500 – $12,000 for a new concrete driveway in San Fernando, $5,000 – $14,000 for a full replacement where the old slab comes out, and $250 – $700 to seal what’s already there. Five things move that number up or down:
- Square footage and access: a 400-square-foot driveway with easy truck access sits at the low end. A 700-square-foot job with a narrow side yard and no room for a wheelbarrow sits at the top.
- Existing condition: tearing out a cracked, heaved mid-century slab and hauling it off costs more than pouring over graded ground. Root intrusion under an old tree costs more still.
- Base and subgrade: soft or poorly drained soil needs more base rock and compaction – one of the biggest hidden variables in the valley.
- Finish and grade: broom finish keeps things lean. Exposed aggregate, integral color, and decorative borders push you toward the high end.
- Permit scope: anything touching the right-of-way or changing grade pulls a city permit, which adds plan-check time and fees to the job.
Your written estimate lists the tear-out, base material, rebar, concrete, forming, pour, and cleanup as separate lines. What it usually doesn’t cover: relocating a buried utility line, correcting a drainage problem that needs a separate fix, or the cost of a city permit that turns out to be required once we’re in the plan-check queue. We tell you up front when any of those look likely. Call (888) 427-1733 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat San Fernando Homes Specifically Do to This Job
San Fernando is its own incorporated city with its own building department, and a small one at about 2.5 square miles. That matters for concrete: plan check and inspection run through the City of San Fernando, not LA County or the City of LA, and the inspectors know the contractors working these blocks by name. Any contractor coming in from out of town who assumes the LA City process will stall your job in the queue. The housing stock here is mostly mid-century and older – postwar and early-1900s bungalows and small stucco homes on tight lots – so driveways are narrow, often shared or close to the property line, and often poured over original subgrade that’s had 70+ years of settling. Intense valley heat and UV take a toll on any slab left unsealed, and seismic exposure from the nearby faults is why we cut and place control joints carefully and check that the slab drains away from the foundation, not into it. Homes along the corridors off Maclay and San Fernando Road often have older flatwork that’s cracked at the corners where the original base failed. If the driveway is part of a bigger project, this often pairs with our work on a Garage Conversion ADU in San Fernando or a New Detached ADU in San Fernando, where driveway width and access have to fit the new structure’s setbacks. It’s also frequently one piece of a full Driveway & Pavers in San Fernando scope, and you can find our broader Driveway & Pavers work on the service page. We cover the whole of San Fernando, ZIP codes 91340 and 91341.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Concrete Driveways & Concrete Work in San Fernando
Plan on 3 – 5 working days for a typical pour, plus 3 – 10 business days ahead of that for permit and utility marking. Curing adds about a week before you drive on it and around 28 days for full strength. Cold or wet weather stretches the timeline. Call (888) 427-1733 to get a real schedule for your lot.
Often yes. Any work that touches the public right-of-way, changes the grade at the curb, or alters drainage usually needs a permit from the City of San Fernando building department – which is separate from LA County or City of LA. We pull the permit and handle plan check for you. Call (888) 427-1733 and we’ll tell you whether your specific job needs one.
Sometimes, if the existing slab is sound, level, and draining correctly – we can pour a bonded overlay on top. But most of the mid-century driveways we see in San Fernando have base failure underneath, which means an overlay just cracks again. We’ll tell you honestly which one your driveway needs. Call (888) 427-1733 for an on-site assessment.
New concrete driveways run $4,500 – $12,000, and a full replacement with tear-out runs $5,000 – $14,000. Sealing an existing driveway is $250 – $700. The big variables are square footage, existing condition, base prep, and finish. Call (888) 427-1733 for a written line-item quote – it’s free and there’s no obligation.
Every job we do is covered by our 730-Day Done Right Promise – if the work isn’t right, we make it right. That’s workmanship coverage on our install, not a promise against every crack the earth moves underneath you, which is why we’re careful about base prep and joints. Call (888) 427-1733 with any warranty question and a live person picks up.
Get a Free Concrete Estimate in San Fernando
Call (888) 427-1733 for a free on-site estimate on concrete driveways and concrete work in San Fernando. We’ll measure the existing slab, check drainage and access, and hand you a written line-item quote with the number you’ll actually pay – no change-order surprises. You’ll hear a live person, day or night, and our technicians are background-checked and arrive in uniform. If the driveway is one part of a bigger plan, we’ll scope it that way too.
Written by the team at Groundwork Construction Co.