Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Custom & Geometric Windows in Manhattan Beach Actually Involve
Custom & geometric windows in Manhattan Beach are built-to-order units – angled bays, trapezoids, arched tops, corner-wrapping glass, radius walls – made to fit an opening no stock window will ever match, and a typical order runs 6 to 12 weeks from template to install, with pricing from roughly $4,500 to $15,000 depending on count, shape complexity and glass spec. Call (888) 427-1733 and we’ll walk your drawings or wall openings and give you a written, line-item estimate.
How We Build and Set a Geometric Window, Stage by Stage
The sequence matters more on custom shapes than on anything else in our windows scope, because a template error caught on day one is a factory re-cut three weeks later. Here’s the real order of operations.
- Stage 1 – Site measure and template (roughly 2 hours). We measure the opening multiple ways against the architectural drawings, check level, plumb and square, and confirm the rough opening dimensions the factory needs. For a radius or angled unit, we build a physical template. You decide at this point whether the glass is fixed or operable.
- Stage 2 – Glass and frame specification (3 to 5 days). You choose frame material, glass coating, and whether the shape is a true custom sash or a fixed picture unit with a separate operable section. We confirm the order against the template before it goes to the factory. This is the stage where a wrong choice is expensive, so we slow it down.
- Stage 3 – Framing and prep (1 to 3 days). If the opening is new, we frame the rough opening to spec, sister the header where a wide geometric unit needs it, and set the sill pan and flashing. Existing openings get the old unit pulled, the rough opening squared and any soft framing replaced before anything else goes in.
- Stage 4 – Install and flash (1 to 2 days per unit). The window goes in square and level, shimmed correctly, then flashed and sealed per the manufacturer’s instructions. Tape, membrane and sealant details are what keep salt air out of the wall cavity on Manhattan Beach’s coastal blocks. You sign off on each unit’s fit before we close it up.
- Stage 5 – Trim, finish and inspection (2 to 4 days). We install interior trim and exterior casing, caulk and paint the trim, and coordinate the required inspection if the job pulled a permit. The homeowner decides on interior trim style and whether exterior casing matches existing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Spec Choices That Decide Whether a Custom Window Lasts
Buyers on this job pick between a handful of real options, and each has a trade-off worth naming.
- Frame material: wood, aluminum-clad wood, or vinyl. Wood wins on craftsmanship and paint finish; aluminum-clad wood keeps the wood interior but protects the outside with a low-maintenance skin. Vinyl handles the salt air at lower cost but limits how tight a radius or jamb profile you can get.
- Glass: standard insulated vs. upgraded low-E coating. On a west-facing wall near the Strand, upgraded low-E cuts heat gain and UV. Standard glass is cheaper; you just live with a hotter room and faster fading.
- Fixed vs. operable. True geometric shapes are usually fixed picture units, with a separate operable window beside them for ventilation. That’s a cost and weight decision – a large fixed arched unit is cheaper to make than the same size in operable.
- Finishes: paint vs. anodized aluminum. Painted finishes need touch-up over the years; anodized aluminum handles the marine layer better and costs more up front.
- Hardware and weatherstripping. Stainless fasteners and marine-grade hardware are worth the line-item upcharge on anything west of Highland.
Where a custom opening sits inside a wider envelope change, the scope usually ties into a full Windows & Doors in Manhattan Beach plan for the rest of the house.
What Custom & Geometric Windows Cost in Manhattan Beach, CA
Custom & geometric windows in Manhattan Beach land between $4,500 and $15,000 for a standard residential job with a handful of shaped openings, and that number climbs fast when the count, the shape, or the glass spec rises. A single fixed radius unit might sit near the bottom of that band; a set of three or four angled bays with upgraded glass and marine hardware pushes to the top. Impact-rated glass adds more again, running toward the higher end of the wider windows range.
The four variables that move the price:
- Number and complexity of shapes. One rectangle is cheap; a trapezoid, arch and angled bay in the same wall is not.
- Glass spec and frame material. Upgraded low-E coating, laminated glass and aluminum-clad frames add cost that’s visible on every line.
- Rough opening work. New framing, a header sistered in, or a wall rebuilt for the opening all add labor.
- Permit scope. A like-for-like replacement of a single window often doesn’t need one; adding a new opening or changing the exterior envelope in a coastal zone usually does, and the permit fee is a real line item.
- Trim and finish. Custom interior trim and exterior casing can add several hundred dollars per opening.
A written estimate from us lists every line – unit, glass, hardware, framing, trim, permit, labor – and the number you see is what you pay. What it won’t include unless we list it: drywall repair beyond the opening, painting the wider room, or structural changes to the wall itself.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Do to This Job
Manhattan Beach construction is dominated by teardown-and-rebuild custom single-family homes on small coastal lots, where strict coastal zoning – height limits, floor-area ratios, setback rules – sits next to an affluent clientele expecting architect-grade finishes. That changes this job. A geometric window here is rarely a retrofit on a 1950s cottage; it’s a unit specified off the architectural drawings on a custom build in the Tree Section or the Hill Section, or a shaped opening added to a gut-remodeled bungalow where the original wall has been stripped and re-framed first. Coastal permitting is the other reality: exterior changes that affect the envelope (new openings, changed elevations) get reviewed against coastal and local requirements, so we build the permit timeline into the schedule instead of discovering it mid-job.
Salt and marine layer then do the rest. On the blocks west of Highland and around the Strand and Gaslamp area, salt-laden air eats through galvanized fasteners, untreated steel and exterior hardware within a few years, so we specify stainless fasteners and marine-grade hardware as a default, not an upsell. The surviving older homes – raised foundations, stucco and wood-frame – need framing checked for soft wood and seismic tying before a new window goes into an opening that was never quite square.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Manhattan Beach
Expect 6 to 12 weeks from order to install. That’s 1 to 2 weeks of measuring, templating and spec decisions, 4 to 10 weeks of factory lead time depending on shape and glass, and 1 to 5 days of install and finish per the job. The lead time is the biggest variable; a fixed radius unit ships faster than a set of operable angled bays. Call (888) 427-1733 and we’ll give you a realistic schedule once we’ve seen the openings.
It depends on the scope. A like-for-like replacement in the same opening often doesn’t require one; a new opening, a changed exterior envelope, or anything that touches the coastal or structural review usually does. We pull the permit and schedule the inspection when it’s required, and we’ll tell you plainly which category your job falls into before you sign. Call (888) 427-1733 for a scope review.
Often yes, if the opening falls inside a wall with nothing important behind it. Where an angled bay or a widened radius needs a header, or where plumbing or wiring runs through the wall we’re cutting into, the framing work grows and so does the trade coordination. We open the wall and confirm before we quote the number, not after.
Roughly $4,500 to $15,000 for a standard residential job, with complexity, count, glass and hardware pushing the number up. Impact-rated and marine-grade specs land toward the top. Call (888) 427-1733 for an exact quote – estimates are free.
Every install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer glass and frame warranties pass through to you on top of that. Ask about both before you sign anything, from us or anyone else.
Get a Free Custom & Geometric Windows Estimate in Manhattan Beach
Call (888) 427-1733 to schedule a free on-site estimate for custom & geometric windows in Manhattan Beach. A live person answers 24/7, and we’ll walk your drawings or openings, confirm what the job needs, and put a written, line-item number in front of you – no surprise line items later. If you’re also reworking the approach, homeowners often pair this with Concrete Driveways & Concrete Work in Manhattan Beach or Asphalt Driveways & Resurfacing in Manhattan Beach; either way, our Windows & Doors team covers the full envelope if the rest of the house is on the list.
Written by the team at Groundwork Construction Co.