Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in Malibu, CA: What It Takes and What It Costs
A failing driveway in Malibu gets worse through one winter, not ten. Salt spray pits the surface, Santa Ana winds load the slope behind it, and rain running off the chaparral finds every crack you didn’t fill. Driveway Repair & Replacement in Malibu typically runs $5,000 – $14,000 depending on length, grade, and what’s underneath, and most jobs take two to five working days. Call (888) 427-1733 for a free on-site estimate, and we’ll tell you straight whether your concrete can be salvaged or needs to come out.
How We Handle Driveway Repair & Replacement: The Full Sequence
No two hillside sites here work the same way, but the order of operations is consistent. Here’s what the week actually looks like.
Day 1: Site evaluation and access plan
We walk the grade, pull core samples where a slab looks suspect, and check how water runs off the surrounding terrain, not just the driveway. Because many lots sit at the end of canyon roads where a concrete truck can’t turn around easily, we plan deliveries and staging before anything gets demoed. You decide right here whether we’re patching or tearing out, and we give you that answer with numbers attached.
Day 1 – 2: Demolition and haul-off
Old concrete, asphalt, or pavers come out and go to a licensed facility. On bluff-edge or narrow-access lots, that means smaller equipment and more trips. Demo on a 40-foot drive usually takes a day; a long winding approach off Latigo or Encinal can stretch to two. You don’t need to be on site for this, but you do need to move vehicles.
Day 2 – 3: Subgrade prep and drainage
This is the stage that separates a driveway that lasts from one that cracks in eighteen months. We re-grade the base, compact it in lifts, and set drainage away from your foundation and toward a legal discharge point. On graded slopes, we may recommend a geotechnical review, especially where the driveway sits over fill. You decide on drainage components here, and those add cost.
Day 3 – 4: Pour or lay
Reinforced concrete, asphalt, or pavers go in depending on what you chose. We use corrosion-resistant rebar and marine-grade hardware throughout, because salt air eats standard fasteners. Pouring on a hot, windy afternoon requires control joints placed correctly; we plan the pour around the weather rather than forcing it.
Day 4 – 5: Cure, seal, and final walkthrough
Concrete needs cure time before traffic, and we’ll tell you exactly how long. We walk the finished surface with you, check slope and drainage, and hand over care instructions in writing. Every driveway we install carries the 730-Day Done Right Promise, so a settlement crack or a drainage issue gets fixed on us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Concrete, Asphalt, or Pavers: The Choices and Their Trade-offs
The material decision shapes both the price and how the driveway handles Malibu’s salt air and storm cycles. Here’s what we actually install and who each option suits.
- Reinforced concrete – the most common replacement here, and the one that handles hillside loads best when the base is built properly. It cracks, but with correct control joints that’s controlled, not structural. Suits long steep drives and heavy vehicles.
- Asphalt – the lower upfront cost, and it flexes with minor ground movement instead of cracking. It needs resealing more often and doesn’t love intense sun. A reasonable fit for flatter approach drives.
- Interlocking pavers – the highest material cost, but individual units can be lifted and reset when something shifts. On a slope where settlement is likely, that repairability matters. Good engineering fit for canyon lots.
- Decomposed granite and gravel – a budget option that handles drainage well but demands periodic re-grading and isn’t ideal for a steep pitch.
- Overlay and resurfacing – only viable when the existing slab is sound. A concrete overlay or asphalt resurface can add years at a fraction of replacement cost, but we won’t sell it if the base is failing.
You decide the material at the estimate stage, and that’s where the final number locks in. We stop at the driveway edge here; if your scope grows into hardscape work elsewhere, that’s covered under our Driveway & Pavers service, and the full project picture lives on the Driveway & Pavers in Malibu page.
What Driveway Repair & Replacement Costs in Malibu, CA
Most driveway replacement in Malibu lands between $5,000 and $14,000. Concrete installation runs $4,500 – $12,000, asphalt paving $3,500 – $9,000, and paver driveways $7,000 – $18,000. Sealing an existing sound driveway is $250 – $700.
Five things push a job toward the high end:
- Length and grade – a long, steep canyon approach means more material, more base work, and slower equipment access.
- Existing condition – full tear-out and haul-off costs more than an overlay. Failing subgrade means excavation you didn’t budget for.
- Drainage – adding channel drains, French drains, or a retention feature to move stormwater legally on a slope.
- Material grade – marine-grade fasteners and corrosion-resistant reinforcement are routine here and add to the material line.
- Access and permitting – remote sites and coastal or WUI review add time and fees.
A written estimate lists demo, haul-off, base prep, reinforcement, materials, drainage, and permits if they’re required. It won’t list landscaping restoration or driveway lighting unless we scope those in. No-hassle upfront pricing: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Malibu Homes Specifically Do to This Job
Malibu sits where the Santa Monica Mountains meet the Pacific, and almost every driveway here is a hillside or bluff-edge build. That changes the work. Coastal development permits and geotechnical slope stability reports are routine parts of the process, and where a driveway crosses graded or fill slope, we want that geotech review before we pour. Salt spray and the marine layer drive material choice: we specify corrosion-resistant fasteners and marine-grade hardware on nearly every job because standard steel fails fast here. Winter rain on steep terrain makes drainage and erosion control a design problem, not an afterthought.
Failure modes we see repeat across this housing stock. Mid-century beach bungalows along the PCH frontage often have driveways poured decades ago on a base that’s since settled; you’ll see alligator cracking and ponding at the low corner. On the contemporary hillside estates above the canyon roads, we more often find cracking at the expansion joints and edge spalling from runoff. Access shapes the schedule as much as the soil does: canyon roads are the only way in to many hillside sites, so trucks get scheduled around narrow grades before anything moves. We cover all three ZIPs here, 90265, 90263, and 90264, along with the surrounding communities on our Malibu service-area page.
Driveway work often lands at the front of a bigger project. Homeowners frequently pair this with ADU Site Prep & Utilities in Malibu, since a new unit and its trenching affect the same access and drainage. If your plans include converting part of the house, that runs through Junior ADU & Interior Conversion in Malibu, and we can sequence both under one contract.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Driveway Repair & Replacement in Malibu
Most replacements take two to five working days, and small repairs finish in one. Long canyon access and larger tear-outs can add a day or two. Call (888) 427-1733 and we’ll give you a realistic schedule with your estimate.
Often yes, especially on hillside or bluff-edge lots under coastal or fire-hardening review. Any change to access, grading, or drainage can require approval. We check what your specific lot requires before work starts and pull the permits for you.
Sometimes. If the base is sound and the failure is surface-level, an overlay, patch, or sealing can add years for a fraction of replacement cost. If the subgrade has failed, patching just delays the problem. Our free on-site estimate tells you which one you’re facing.
Replacement runs $5,000 – $14,000, with concrete at $4,500 – $12,000 and pavers at $7,000 – $18,000. Sealing is $250 – $700. Slope, length, drainage, and material grade move the number. Call (888) 427-1733 for an exact quote; estimates are free.
Every driveway we install is backed by our 730-Day Done Right Promise. If something we built fails within that window, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing.
Get a Free On-Site Estimate for Driveway Repair & Replacement in Malibu
Call (888) 427-1733 to schedule your free estimate. A live person answers every time, day or night, and we’ll book a visit that fits your schedule. On the walk-through we evaluate the grade, the base, and the drainage, then give you a written line-item quote with a clear number and no change orders waiting in the wings. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co..