Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Driveway Repair & Replacement in San Fernando, CA: What It Costs and How Long It Takes
Driveway Repair & Replacement in San Fernando typically runs $5,000 – $14,000 for a full tear-out and pour, or $250 – $700 for sealing and crack repair when the slab is still sound. Most full replacements take 3 to 5 working days from demo to cure. Call (888) 427-1733 and we’ll set up a free on-site estimate with a written, line-item quote you can compare against any other bid.
How We Run a Driveway Repair & Replacement in San Fernando
San Fernando drives take a beating. Intense valley heat, UV that bleaches and oxidizes just about any surface, and the occasional winter rain that finds every hairline crack all work on the same slab year after year. Here’s how the job actually goes, stage by stage, so you know what’s happening in your yard and when.
Stage 1: Site assessment and utility locate (Day 1, about 2 hours)
A technician walks the drive with you, maps the cracks, checks for settling and ponding, and locates the water main, gas line, and any irrigation or electrical conduit running under or near the slab. You’ll sign off before anything gets broken out. We also check whether the apron ties into the city sidewalk, because City of San Fernando right-of-way work on the approach is a separate conversation from the private drive.
Stage 2: Demolition and haul-off (Day 1, 4 to 6 hours)
Concrete comes out with a skid-steer breaker or pneumatic tools, and the debris gets hauled to a licensed disposal site the same day. Older drives sometimes have a base layer of river rock or even brick underneath, which changes the haul count. Asphalt drives demo faster; pavers come up and can often be salvaged, which factors into the estimate.
Stage 3: Grading and base prep (Day 2, full day)
This is the stage homeowners underestimate. We strip the old base, regrade for proper drainage away from the house, and compact a fresh aggregate base in lifts. A 4-inch compacted base for concrete, 6 inches for pavers. San Fernando lots are often tight and slope toward the street or garage, so getting the fall right now saves you a pond in January. You decide at this stage if you’re adding a drain channel or widening the apron.
Stage 4: Pour or lay (Day 3, half to full day)
Concrete goes in, gets screeded, finished, and control joints cut within 12 hours. Pavers get laid, cut at edges, and compacted. Asphalt goes down hot and rolls flat. We use Sakrete mixes where bagged material makes sense on smaller repair sections; for full pours the ready-mix supplier is determined by volume and access. You’ll want to keep cars off the surface for 24 to 48 hours minimum, and full concrete cure takes about 7 days before heavy loads.
Stage 5: Final inspection and walk (Day 4 to 5)
We do a final pass on edges, joints, drainage fall, and site cleanup, and walk it with you. Any punch items get scheduled then. The 730-Day Done Right Promise covers the workmanship on what we put down, so if a joint pops or a paver heaves, we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Your drive has to do three things: drain, hold weight, and look right from the street. Materials, thickness, finish, and joint layout all affect how well it does that and what you’re paying for.
- Concrete, standard broom finish – the workhorse. Roughly $4,500 – $12,000 for a full install. Holds up to sun well, drains fast, and can be patched. Trade-off: cracks over time as the ground shifts and heat cycles work it.
- Concrete, exposed aggregate or stamped – adds curb appeal and hides minor cracking. Costs more per square foot and slightly rougher to shovel or sweep. Good for San Fernando homes with stucco mid-century fronts where a plain slab looks flat.
- Pavers – $7,000 – $18,000 range. Individual units can be pulled and reset if a section settles, which is a real advantage on the older graded lots. Higher upfront cost and more weeding in the joints unless polymeric sand is used. Belgard pavers are one of the brands we set most often.
- Asphalt – the leanest budget option at $3,500 – $9,000. Fast install, smooth ride, but needs resealing every 2 – 3 years and softens under valley heat if mix grade is wrong. Budget for the reseal in your total.
- Thickness and reinforcement – 4 inches is standard for cars, 5 – 6 inches where trucks or RVs park, with #3 or #4 rebar at 18 – 24 inches on center. Ask for this in writing; cheaper bids quietly skip it.
- Edge restraints and drain channels – small line items that prevent the big failures. Concrete edges hold pavers from spreading; a channel drain at the low point stops water backing into the garage.
What Driveway Repair & Replacement Costs in San Fernando, CA
Full replacement in San Fernando runs $5,000 – $14,000 for a typical two-car drive. Sealing or targeted crack and spall repair runs $250 – $700. Paver installs land at $7,000 – $18,000, concrete new install at $4,500 – $12,000, and asphalt at $3,500 – $9,000.
Five things move that number:
- Square footage and access. A 400 sq ft drive with a clear path prices very differently from a 900 sq ft drive wedged between a fence and a house where a wheelbarrow is the only hauling option.
- Existing condition and base. Cracked top over sound base is a patch job. Heaved, settled, or tree-rooted base means full demo and regrade, and that’s where the low end jumps.
- Utilities and obstructions. Relocating a gas riser, water shutoff, or irrigation is a licensed-trade add. It’s not optional if it’s in the pour path.
- Material grade and thickness. Standard broom concrete at 4 inches sits near $4,500 – $7,000 on a typical city lot. Stamped or thicker pours push toward $12,000.
- Permit scope and city sidewalk apron. Any work touching the public right-of-way can require a City of San Fernando permit, and that permit, plus inspection, becomes a line on the quote.
Every written estimate we hand over is itemized: demo, haul, base, material, labor, permit if applicable, and any add-ons discussed. If the price moves once we’re on-site because of what we find under the old slab, you get the conversation before we touch anything, not after. Call (888) 427-1733 for an exact quote on your drive.
See the difference
Before
After
Before
After
Before
AfterWhat San Fernando Homes Do to This Job
San Fernando has its own building department and permits and inspects its own projects. That’s rare in the Valley. City plan check runs separately from LA County and City of LA, and inspectors here tend to know the contractors who work in town repeatedly. If a bidder doesn’t know which counter to walk into for a right-of-way permit, that’s a signal.
The housing stock shapes the work, too. Much of what we tear out is postwar concrete or early-1900s asphalt sitting on small stucco bungalows on tight mid-century lots. Grading is often the issue: driveways that fall toward the garage instead of the street, or sections that have heaved where a root pushed up under the slab. On the commercial corridors and older light-industrial edges of town, we see heavier asphalt that’s failed to the sub-base.
Heat and seismic movement are the two forces here. UV oxidizes and chalks the surface, sun-cycles open joints, and the small shake events along the nearby faults work the soil under the slab over decades. If you’re pairing a new drive with a larger project, homeowners often pair this with ADU Site Prep & Utilities in San Fernando, since the trenching and grading overlap. This repair work sits inside our wider Driveway & Pavers service, and it’s one of the jobs we run throughout San Fernando.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Driveway Repair & Replacement in San Fernando
Most full replacements take 3 to 5 working days from demo to final walk. Repairs and sealing are usually same-day or two-day jobs. Concrete needs 24 to 48 hours before foot traffic and about 7 days before you park a car on it. Call (888) 427-1733 for a schedule estimate based on your drive size.
Work on the private drive usually doesn’t require a building permit, but anything touching the public sidewalk apron or right-of-way does, and the City of San Fernando runs its own plan check. We’ll tell you in the estimate whether your job triggers a permit and factor the fee into the quote. Call (888) 427-1733 with a photo of your drive and we can usually tell you over the phone.
Yes, in most cases the existing lines stay where they are and the new slab is poured around them. It only becomes a relocation when a riser, meter, or cleanout sits inside a pour area and can’t stay. That’s a licensed-trade add we quote separately before any work starts. Call (888) 427-1733 and we’ll walk the utility exposure with you.
Targeted repair and sealing runs $250 – $700, and a full replacement runs $5,000 – $14,000 depending on size, base condition, material, and permit scope. Concrete, pavers, and asphalt all price in different bands, so the material choice is the biggest lever. Call (888) 427-1733 for a free written estimate with each line itemized.
Every driveway project we complete is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That includes workmanship on grading, joints, drainage fall, and finish. Calls get answered by a live person 24/7, so if something needs a look, you’re not leaving a voicemail. Call (888) 427-1733 to get started.
If you’re planning a wider scope around the drive, that comes up as part of a full Driveway & Pavers in San Fernando project, and homeowners often pair this with Junior ADU & Interior Conversion in San Fernando when they’re reworking access to a detached garage at the same time.
Get a Free Estimate on Your San Fernando Driveway
We’ll walk your drive, measure it, check the base and drainage, and hand you a written line-item quote with material options priced side by side. If a permit is needed, it’s in the number. If the base is shot, you’ll see what that adds before you commit. Call (888) 427-1733 to schedule your free estimate for Driveway Repair & Replacement in San Fernando. Upfront pricing, no surprises, and the 730-Day Done Right Promise behind the work.
Written by the team at Groundwork Construction Co. of Los Angeles.