Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterDriveway Resurfacing vs Replacement in Los Angeles: How to Decide Before You Spend
Choose replacement over resurfacing if your concrete has cracks wider than a quarter inch, cracks spaced closer than four feet apart, or a crack pattern that repeats across the full slab – that’s a subbase failure, and an overlay will reflective-crack through the new material within two seasons in Los Angeles. Choose resurfacing if the base is sound and you’re dealing with surface wear alone. The honest version of this decision starts underground, not with the finish. If you want an expert to read the slab before you commit, call Groundwork Construction Co. of Los Angeles at (888) 427-1733 for a free estimate and a written subbase opinion.
A resurfacing job in Phoenix might hold up ten years. In Los Angeles, on expansive clay that swells and shrinks with every wet-dry cycle, that same job can mirror-crack in 18 months. The surface isn’t the problem. The base is. And most bids won’t tell you that before they take your money.
Why Los Angeles Soil Changes the Math on Resurfacing
Los Angeles sits on a broad patchwork of expansive clay soils, especially across the flats and the older postwar tracts. That clay absorbs winter rain, swells, then dries and shrinks through the long fire season. The ground under your driveway is moving – slowly, seasonally, and relentlessly.
A concrete or asphalt overlay is a skin. It doesn’t reinforce anything underneath it. When the base moves, the new surface moves with it, and the old crack pattern telegraphs straight up through the fresh layer. That’s the reflective crack you see eight, twelve, sometimes eighteen months after a resurfacing job here. A homeowner in Phoenix, on stable decomposed granite, never deals with this.
Los Angeles construction already answers to some of the strictest seismic and hillside engineering rules in the country – soft-story retrofits under Ordinance 183893, hillside grading standards, slope engineering in the Santa Monica Mountains. That same soil reality reaches all the way down to your driveway apron.
The Test We Run Before We Quote You a Resurfacing
You don’t need a lab. You need three questions answered, and any honest contractor should be willing to answer them on-site and in writing.
- Crack width. Hairline cracks under a quarter inch are usually cosmetic surface stress. Cracks wider than a quarter inch mean the slab is moving at the base.
- Crack spacing. If cracks sit closer than four feet apart, the slab has lost structural continuity. An overlay on top of that is a coating over rubble.
- Pattern. Cracks that repeat across the full slab in a uniform grid point to a failing subbase, not wear.
Two more flags are Los Angeles-specific. On a hillside lot, any heaving or differential settlement (one part of the slab riding up relative to the next) is a grading and drainage problem, not a surface problem. Resurfacing over that without fixing the grade can create a new liability if the driveway abuts a public sidewalk – LAMC 62.104 governs sidewalk maintenance obligations, and you don’t want to inherit them.
There’s also the stormwater angle. Nearly any resurfacing adds impervious surface, and LA’s infiltration requirements under LAMC 64.70 can apply above certain project thresholds. A full replacement sometimes lets you spec a permeable system that brings you into compliance where an overlay won’t. That’s a conversation worth having before the concrete truck shows up.
Cost Reality: What Resurfacing vs Replacement Runs in Los Angeles
Here’s the number that matters. Resurfacing in Los Angeles typically runs $3-$6 per square foot. Full replacement runs $8-$15 per square foot. On a 1,500-square-foot driveway, that spread looks like real money up front. It isn’t, over a five-year window.
Say your 1,500 sq ft driveway gets a $4.50/sq ft resurfacing – about $6,750. The base was already failing. It mirror-cracks in 18 months. You repatch, then replace inside five years anyway. You paid twice. The replacement done correctly once, at, say, $11/sq ft – about $16,500 – doesn’t come out cheaper in year one. It comes out cheaper by year five, and you’re not looking at the same cracks you started with.
| Approach | Los Angeles Cost Range | Best Fit | Typical Lifespan |
|---|---|---|---|
| Resurfacing only | $3-$6 per sq ft | Sound base, cosmetic wear | 8-15 years (healthy base) |
| Full replacement | $8-$15 per sq ft | Failing base, settlement, hillside grading issues | A generation |
| Driveway sealing (as a hold) | $295-$825 | Buying time while you plan | 2-3 years as protection |
For a full replacement estimate on your specific square footage, our Driveway & Pavers team walks the slab and measures before quoting. Our published range across the trade: driveway replacement typically runs $5,900-$16,520, paver driveway installation runs $8,260-$21,240, and concrete driveway installation runs $5,310-$14,160. Your final number depends on the base and the finish you choose.
Resurfacing vs Replacement, Side by Side
What Resurfacing Actually Does Well
Resurfacing wins when the base is sound and the problem is cosmetic – fading, mild surface scaling, spider cracks under a quarter inch. It’s faster, less disruptive, and it refreshes the look of a driveway that isn’t structurally compromised. If you’re planning a home sale or want a clean face while you save for replacement, it can buy you real time. Consider it a hold, not a fix, and only after the base has been tested.
When Replacement Is the Only Answer
Replacement is the honest call when the subbase has failed and the slab shows it. It’s also the answer on hillside lots where grading and drainage are the root cause – you can’t fix a grade problem by coating it. And it’s often the answer when you want a permeable paver system to solve drainage and stormwater in one move. The Driveway & Pavers in Los Angeles page covers those permeable and paver options in more detail.
Finishes Worth Knowing
If replacement is the answer, the finish drives much of the cost. Stamped concrete, pavers, and exposed-aggregate finishes all sit in different price buckets. High-traffic aprons benefit from tighter joint detailing and a properly compacted aggregate base – the part nobody photographs but everybody pays for later. Premium finishes hold up when the base underneath is right; they fail just as fast as a cheap overlay when it isn’t.
How We Decide Before We Quote
The upfront pricing you get from Groundwork Construction Co. of Los Angeles includes a subbase assessment before any quote goes out. We’ll tell you in writing whether resurfacing is a viable answer or a short-term patch. That diagnosis is backed by the 730-Day Done Right Promise, which means if we say resurface and it fails, we’re accountable to our own call. The number you see is the number you pay, and every project over $10,000 comes with $1,000 off plus 0% financing for 18 months. Calls are answered by a live person 24/7, so a question on a Saturday gets answered on a Saturday.
FAQs
Resurfacing is cheaper up front – $3-$6 per sq ft vs $8-$15 per sq ft for replacement – but on a failing subbase it’s often more expensive over five years. A 1,500 sq ft resurfacing ($6,750) that mirror-cracks in 18 months means you pay for replacement anyway. Call (888) 427-1733 for a free estimate – we’ll test the base first and give you a straight answer.
Check three things: crack width, crack spacing, and crack pattern. Cracks wider than a quarter inch, spaced less than four feet apart, or repeating across the whole slab signal a failing subbase – replacement is the answer. Past that, any heaving or differential settlement on a hillside lot points to a grading problem, which resurfacing can’t fix. Call (888) 427-1733 for an on-site read.
No, not if the cracks come from the base. Resurfacing can hide hairline surface cracks temporarily, but on expansive LA clay, an overlay over a moving slab reflective-cracks through the new surface within two seasons. If the base is failing, you’re coating a moving foundation. Call (888) 427-1733 to confirm whether resurfacing will actually hold before you spend.
Sometimes. A full replacement lets you spec a permeable paver system that can bring you into compliance with LA’s infiltration requirements under LAMC 64.70, where a standard resurfacing might not. That’s a design question worth raising with the estimator. Call (888) 427-1733 and ask for a permeable option in your quote.
If you’d rather have it looked at, Groundwork Construction Co. of Los Angeles offers a no-pressure assessment in Los Angeles – call (888) 427-1733. We’ll test the base, quote the number, and tell you the truth about whether resurfacing will hold.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles, CA.