Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Los Angeles, CA
A new fence gate in Los Angeles typically costs $350 to $1,400 for a single walk gate and $900 to $2,800 for a double drive gate, installed, depending on material, width, and hardware. The gate is the part of the fence everyone touches, and it’s the part that fails first when it’s hung on a weak post or fitted with hardware that can’t handle a hillside. We build gates as their own engineered piece, not as an afterthought tacked onto the last fence panel. If your gate is dragging, sagging, or missing a latch that actually secures, call Groundwork Construction Co. of Los Angeles at (888) 427-1733 and we’ll take a look.
Groundwork Construction Co. of Los Angeles treats gates the way we treat every part of a Fence Installation project: hung on posts set in concrete to depth, framed to resist racking, and backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. That’s the standard whether you need one garden gate or a matching set of driveway gates across a Los Angeles property.
Why gates get their own page
A gate takes far more punishment than a fence panel. A walk gate swings dozens of times a day. A drive gate absorbs cars, kids, dogs, and the dry-to-wet cycling that comes with Los Angeles weather. The post carries the whole weight of the leaf, plus the leverage of every swing. When a gate sags within a year, it’s almost never the hinges. It’s the post, or the frame, or the way the gate was measured against a fence line that wasn’t square.
We’ve rebuilt gates on plenty of fences that were otherwise sound. The rest of the fence was fine. The gate was hung on a 4×4 post set 18 inches deep in sandy soil, and it had twisted enough to bind the latch. Our answer is a heavier post set deeper, a diagonal brace that runs the right direction, and hardware rated for the leaf weight. Our technicians have up to 12 years of experience and they hang gates the way they’d hang one on their own property.
Los Angeles is a gate-heavy city by nature. Driveways behind gates, side yards that need to close off, pool areas that need a self-closing latch, alleys that need a service gate. We build all of them, and we build them to open and close smoothly years after the install. From foundation to finish line, one contractor handles the post, the frame, the hardware, and the finish. No surprises about who’s responsible when a hinge works loose.
When You Need Fence Gates
Some gate problems are obvious. Others show up slowly and get ignored until the gate won’t close. Here’s what we see most often across Los Angeles properties:
- The gate sags and drags on the ground. This is the most common call. The leaf has dropped because the hinge post has shifted or the frame has racked. In older Hollywood Hills and Silver Lake properties, we regularly see gates hung on posts set into hillside soil that has moved over time. The fix isn’t a new hinge. It’s a new post foundation and a re-hung leaf.
- The latch has stopped lining up. A gate that won’t latch is a security gap, not just an annoyance. If you have a pool, a dog, or kids, a latch that doesn’t catch is something to fix fast. Los Angeles code requires self-closing, self-latching hardware on gates that enclose a pool, and we install that as standard on any pool-area gate.
- You’re adding a driveway gate for security or privacy. A lot of San Fernando Valley and Westside homes have an open driveway that could benefit from a double swing or sliding gate matched to the fence line. We build drive gates wide enough for a standard vehicle, framed to hold their weight, with hardware that survives daily use.
- The old gate is rusted out or the wood has rotted at the base. Los Angeles gets less rain than most of the country, but our coastal marine layer and the sprinkler overspray on a garden gate both shorten its life. If the bottom rail is soft or the steel is pitted through, replacing the gate is usually cheaper than patching it.
- You need a service gate or side-yard access gate. Many Los Angeles lots have a narrow side yard that opens to the street. A properly hung single gate gives you secure access for trash cans, meters, and equipment without leaving the yard open to the street.
- The gate doesn’t match the fence. A mismatched gate is its own kind of problem. If you’ve got a vinyl fence with a wood gate, or a wrought-iron gate that’s been repainted five times, we build a gate that reads as part of the same fence, same style, same color, same hardware family.
If you recognize any of these, the fix is usually a one-visit job for a walk gate and a two-visit job for a custom drive gate. Call (888) 427-1733 and we’ll give you a straight answer on what’s actually wrong before we quote a fix.
Our Fence Gates Process
Every gate we build follows the same sequence, whether it’s a $400 garden gate or a $2,800 custom driveway gate. The steps don’t change. What changes is the material, the size, and the hardware spec.
- Walk the line and measure the opening. We measure the actual clear opening, not the fence line. We check for square, slope, and how the ground sits under the swing path. A gate over a sloped driveway in the hills is a different build than one on a flat lot in Torrance. Getting this right up front is why we don’t come back a month later to fix a gate that binds.
- Set the hinge post and latch post. The hinge post carries the whole leaf, so it’s sized and set deeper than a fence post. On most builds we set a 4×4 or heavier post in concrete to a depth that matches soil conditions. On drive gates, we step up to a 6×6. This is the step that prevents the sag call six months later.
- Build the gate frame to resist racking. A gate needs a rigid frame with a diagonal brace running from the bottom hinge-side corner up to the top latch-side corner. Braced the wrong way, the gate sags into the latch. We frame walk gates in the same material family as the fence and build drive gates as two leaves that meet at a center stop, so neither leaf is too wide to hold its shape.
- Hang the gate and set the hardware. Hinges rated for the leaf weight, a latch that lines up and catches cleanly, and self-closing hinges where the property needs them. We test the swing, adjust the reveal, and check that the gate clears the ground along its whole arc. You open and close it yourself before we load up.
- Finish and hand off. Stain or seal on wood, touch-up on metal, and a final walkthrough of how the gate opens, where the latch sits, and how to keep the hardware working. Then it’s covered by the 730-Day Done Right Promise. If it sags, binds, or stops latching because of our workmanship inside that window, we come back and make it right.
Most walk gates are done in a single visit. Custom drive gates usually take two, one to set posts and one to hang and finish, so the concrete has time to cure before the leaf goes on. That’s the right way to do it. A gate hung on green concrete is a gate that sags.
Fence Gates Pricing in Los Angeles
Here’s the honest range. A basic wood walk gate installed runs $350 to $800. A metal or wrought-iron walk gate installed runs $500 to $1,100. A vinyl walk gate installed runs $450 to $900. Double drive gates, whether swing or sliding, run $900 to $2,800 depending on span, material, and hardware. These are installed prices. They include the posts, the frame, the hardware, and the finish.
| Gate Type | Typical Installed Cost | What Drives the Range |
|---|---|---|
| Wood walk gate | $350 – $800 | Width, species, hinge post depth, latch type |
| Vinyl walk gate | $450 – $900 | Gate kit brand, width, self-closing hardware |
| Metal or wrought-iron walk gate | $500 – $1,100 | Panel gauge, custom vs. stock, powder coat |
| Double swing drive gate | $900 – $2,200 | Total span, leaf weight, post depth, ground slope |
| Sliding drive gate | $1,400 – $2,800 | Track length, cantilever vs. ground track, hardware |
| Pool safety gate, self-closing | $450 – $950 | Code-compliant latch, height, material match |
What actually moves the price
- Span and leaf weight. The wider the gate, the heavier the hardware and the deeper the post. A 3-foot garden gate and a 6-foot walk gate are not the same build.
- Material. Wood is the most economical and the most repairable. Vinyl needs less upkeep. Metal holds up longest in coastal air but costs more up front.
- Ground slope. Los Angeles hillsides are called that for a reason. A gate on a slope needs the frame built to clear the arc without dragging, and that’s a bit more framing labor than a flat-lot build.
- Automation and hardware. A manual latch is the base build. Self-closing hinges, a keyed latch, or a driveway opener each add to the number.
- Whether the existing post can stay. If the post is sound and set deep enough, we can re-hang on it. If not, it gets replaced, and that’s part of the quote, not a surprise line item.
Upfront pricing is how we work. The number you see is the number you pay, and every quote comes from a free on-site estimate. We also have $1,000 off projects over $10,000 and 0% financing for 18 months, which matters if the gate is part of a larger fence and hardscape plan. A drive gate plus a new driveway in the Valley or an ADU by Abodu or Mighty Buildings in the backyard often starts to qualify for both. Call (888) 427-1733 and we’ll put the numbers in front of you.
Fence Gate Materials and Hardware We Work With
We match the gate to the fence, not the other way around. If you’ve got a wood fence with dog-ear cedar pickets, your gate is framed in the same cedar with the same picket profile. If you’ve got vinyl from a quality line, your gate comes as a matching kit so the color and profile line up. If you’ve got wrought iron, we work with a metal fabricator to match the picket gauge and finish. The gate should look like it was always there.
Hardware is where cheap gates fail. We spec hinges rated for the leaf weight, latch hardware that catches cleanly, and self-closing hardware where the property needs it. On a pool gate, that’s not optional. State and local codes require self-closing, self-latching gates around pools, and we install to that standard as the default, not an upgrade.
Coordinating gates with the rest of the yard
A lot of the gates we build are attached to something else in progress. A gate that ties into a new driveway and pavers project in the Valley or on the Westside gets set once the paver line is in, so the gate clears the apron and the driveway slope. A gate that closes off a backyard remodel near a new kitchen remodeling project gets built to let the crew through while the work is going, then re-hung on final hardware at the end. Doing this under one contract saves you the coordination headache of three different trades arguing about who set the post wrong.
If the gate is part of a larger fence and hardscape plan and you’re considering prefab structures like an ADU from Cover or Dvele, we plan the gate and fence line so it opens to the yard, clears the ADU footprint, and stays accessible for the unit’s service connections. Smaller things matter too. A side-yard gate next to a new bathroom remodel should let crews in and out without leaving the yard open, and a gate matched to a new roof replacement schedule should be hung once the roof work is done, so the gate isn’t in the way of the crew’s ladder path.
How We Protect Your Gate Over the Long Haul
A gate is a moving part. It’s the only part of a fence that does physical work, and it will eventually need attention. That’s true of any gate built with any material. What matters is what the company does when it happens.
Every gate we hang is covered by the 730-Day Done Right Promise. If the gate sags, binds, stops latching, or shows a workmanship problem inside that window, we come back and make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to gate work the same as it applies to a window replacement or a home addition.
Our technicians are background-checked and arrive in uniform, and someone answers the phone every hour of the day. No voicemail, no waiting until Monday. If your gate is stuck open at 9 p.m. on a Saturday and you can’t secure the property, call (888) 427-1733 and a live person picks up. The gate gets assessed and prioritized, and if it needs a same-day visit, we work that out with you.
The build is part of the protection, too. The right depth of post, the right direction of brace, the right weight of hinge. A gate built to spec doesn’t need much attention. A gate built to a price does. We build to spec, and we put it in writing.
Working With Us on a Fence Gate
Some of our gate calls are gate-only jobs. A single walk gate hung on an existing fence, fixed in a visit. Others start with the gate and grow into a full fence and hardscape plan: a new fence line, a matching drive gate, a paver apron under the gate swing, a self-closing pool gate in the back. Both are how we work. We don’t require you to buy the whole fence to get a good gate.
The work starts with a free on-site estimate. We walk the property, measure the opening, look at the existing posts, and talk to you about material, hardware, and where the gate needs to swing. Then we give you an upfront number. No ranges that turn into surprises, no “we’ll know more once we open it up,” no extra line items at the end. The number you see is the number you pay.
If the project qualifies, the $1,000 off projects over $10,000 and 0% financing for 18 months apply automatically. For homeowners planning the gate as part of a larger yard rebuild, those offers make the whole plan more workable. For a single walk gate, the free estimate is the whole story, and that’s a fine way to do business.
Groundwork Construction Co. of Los Angeles is a full-scope home construction partner for homeowners who’ve dealt with vague bids and disappearing crews and don’t want to do it again. Gate work is one of the smaller things we do, and it’s held to the same standard as the bigger projects. If the gate is part of a broader plan involving a new kitchen, a new roof from GAF or CertainTeed, or windows from Andersen or Pella, all of it runs through the same account management, the same guarantee, and the same phone number.
FAQs – Fence Gates
How much does a fence gate cost in Los Angeles?
A basic wood walk gate installed in Los Angeles runs $350 to $800, a metal or vinyl walk gate runs $450 to $1,100, and a double drive gate runs $900 to $2,800 depending on span and material. The biggest cost drivers are gate width, post depth, and hardware. Call (888) 427-1733 for an exact quote on your property, estimates are free.
Can you fix a sagging gate the same day?
Yes, in most cases a sagging walk gate can be re-hung or repaired the same day once we’ve looked at the post. If the post itself has failed, we replace it, and that takes a second visit so the concrete can cure before the gate goes back on. Call (888) 427-1733 and a live person will set up the assessment.
Is it cheaper to repair a gate or replace it?
Repair is almost always cheaper if the frame and post are sound and only the hardware, latch, or hinge has failed. A hinge and latch replacement on a solid gate runs a fraction of a new gate. Replacement makes more sense when the bottom rail is rotted, the metal is pitted through, or the post has shifted and the whole frame is out of square. Call (888) 427-1733 and we’ll tell you honestly which side of that line your gate is on.
Do you install pool safety gates?
Yes. Los Angeles and California code require self-closing, self-latching gates around pool areas, and we install to that standard on any pool-area gate. The hardware is spec’d for the leaf weight and tested for a clean catch. If you’re not sure whether your current gate meets code, that’s worth a look, and an on-site estimate is free. Call (888) 427-1733 to set one up.
Can you match a new gate to my existing fence?
Yes. We match the material, profile, color, and hardware family so the gate reads as part of the same fence line. Whether it’s a cedar fence, a vinyl fence, or a wrought-iron fence, the gate is built to match, not to fit whatever a stock kit happens to offer. Call (888) 427-1733 and we’ll talk through material options on site.
What kind of warranty covers a new gate?
Every gate we install is backed by our 730-Day Done Right Promise, which covers workmanship on the hang, post set, frame, and finish. If the gate sags, binds, or stops latching due to our work inside that window, we come back and make it right. Call (888) 427-1733 for details on your specific project.
Get a Free Fence Gate Estimate in Los Angeles
If your gate is sagging, dragging, or won’t latch, the fix is usually quick and the estimate is free. Groundwork Construction Co. of Los Angeles answers the phone with a live person 24 hours a day, and we’ll walk your property, measure the opening, and give you an upfront number you can trust. Call (888) 427-1733 today to schedule your free estimate and get your gate working the way it should.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles.