Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFrameless Glass Shower Enclosures in Los Angeles, CA
Frameless glass shower enclosures in Los Angeles typically cost $2,400 to $6,800 installed, depending on glass thickness, panel count, hardware, and whether we’re opening up a load-bearing wall. Most standard alcove conversions land in the $3,200 to $4,600 range and take one to three days once the glass is templated and fabricated locally.
A frameless enclosure is what you get when there’s no metal frame boxing in the glass. Instead, 3/8-inch or 1/2-inch tempered panels are held by discreet clips, standoffs, or a slim channel at the floor and wall. The result reads as almost no shower wall at all, which is why it’s become the default choice in Los Angeles bathroom remodels, especially in the light-starved bungalows and condos where every reflected inch matters. If you’re weighing it against a framed unit or a tub-to-shower conversion, our Bathroom Remodeling page covers the full scope of what a remodel here involves.
Groundwork Construction Co. of Los Angeles builds these enclosures as part of a larger bathroom scope, not as a glass-only add-on. That matters because the enclosure is only as good as what’s behind it: the waterproofing, the curb, the tile plane, and the framing. When the glass gets templated against a wall that isn’t plumb or a curb that isn’t level, you get gaps, leaks, and a door that swings on its own. We control all of it under one contract, backed by our 730-Day Done Right Promise. Call (888) 427-1733 and a live person picks up, day or night.
Key Takeaways
- Frameless glass in Los Angeles runs $2,400 to $6,800 installed, with most jobs in the $3,200 to $4,600 range.
- Glass is templated on-site after tile is set, then fabricated, usually adding 7 to 14 days to the schedule.
- 3/8-inch glass suits most alcoves; 1/2-inch is the standard for walk-in and curbless layouts.
- Every enclosure we install carries the 730-Day Done Right Promise, backed in writing.
- Upfront pricing means the number on the estimate is the number you pay, and 0% financing for 18 months is available.
When You Need Frameless Glass Shower Enclosures
Some homeowners come to us knowing exactly what they want. Others call because something in the current shower has stopped working, and the fix is a full re-do. Here’s what we hear most often around Los Angeles.
- Your framed unit has started leaking at the track. The aluminum channel at the bottom of an older framed shower is where water pools, caulk fails, and slow rot sets in behind the tile. In the older homes around Hancock Park and Mid-City, we regularly find soft framing behind a shower door that “just needed re-caulking.”
- The glass is fogged, scratched, or permanently etched. Los Angeles tap water runs hard, and years of mineral buildup etch tempered glass in a way no cleaner removes. Once it’s hazy, replacement is the only real answer.
- You’re mid-remodel and the layout no longer works. A tub comes out, a walk-in goes in, and suddenly the old glass panels don’t fit the new footprint. This is the most common scenario we encounter, and it’s where frameless shines, because panels are cut to the exact opening.
- You want the bathroom to feel bigger without adding square footage. In condos and smaller homes from Silver Lake to Culver City, frameless glass is the single highest-impact change per dollar. Removing the metal frame visually opens the shower into the room.
- You need a curbless or low-threshold entry. Aging-in-place updates and accessibility remodels almost always call for a frameless walk-in with a low or zero curb, which requires careful waterproofing and slope work before a single panel is ordered.
- You’re selling or refinancing and the bathroom is dated. A 1990s framed shower dates a whole house in photos. A clean frameless enclosure is one of the few upgrades buyers consistently notice.
Our Frameless Glass Shower Enclosures Process
We don’t cut glass and hope. Every enclosure goes through the same sequence, and the sequence is why these fit right the first time.
- In-home measurement and design consult. We measure the opening, check wall plumb and curb level, look at how the door will swing, and talk through glass thickness, hardware finish, and panel configuration. This consult and the estimate are free.
- Address the substrate before the glass. If we’re doing the full bathroom, this is where waterproofing, curb construction, and tile get finished and cured. Glass can’t be templated against wet thinset or an unset curb, so this stage has to finish cleanly.
- On-site templating. Once tile is set and cured, a technician templates the exact opening. Los Angeles homes are rarely square, and a templated panel accounts for the real wall, not a drawing.
- Fabrication. Panels are cut from tempered glass, edges polished, and holes drilled for hinges and handles before tempering. This step typically takes 7 to 14 days depending on hardware and glass thickness.
- Installation. We set the panels, level and shim the hardware, install the door, and seal the joints. Most installs are completed in a single visit, and we clean up everything we brought in.
- Walkthrough and warranty handoff. We demonstrate the door operation, explain care and cleaning, and put the 730-Day Done Right Promise in writing. If anything isn’t right, we come back and make it right.
One more note on scheduling: because fabrication happens off-site, the gap between templating and install is the one part of the timeline we can’t compress. We tell you the date up front so you’re not guessing. If your wider project involves reworking more of the home, our home page shows the full range of what we handle from foundation to finish line.
Frameless Glass Shower Enclosures Pricing in Los Angeles
Frameless glass shower enclosures in Los Angeles generally run $2,400 to $6,800 installed. That range covers a standard alcove up to a large walk-in with premium hardware and 1/2-inch glass. Here’s how the number breaks down.
| Line item | Typical Los Angeles range |
|---|---|
| Standard alcove enclosure, 3/8″ glass, one door | $2,400 – $3,400 |
| Neo-angle or corner unit | $2,800 – $4,200 |
| Large walk-in, 1/2″ glass, fixed panel plus door | $4,200 – $6,200 |
| Curbless or low-threshold conversion (includes substrate work) | $5,500 – $6,800+ |
| Premium hardware upgrade (matte black, brushed brass, oil-rubbed bronze) | Add $250 – $700 |
| Wall or floor tile and waterproofing (when part of a full remodel) | Priced with the bathroom scope |
What drives cost in Los Angeles specifically: glass thickness (1/2-inch is roughly 30% more than 3/8-inch), number of panels, hardware finish, whether the walls are plumb (older homes often need furring or tile adjustments), and access. A third-floor walk-up in a Koreatown condo building takes more labor than a single-story house in Sherman Oaks, and we price honestly for that rather than discovering it on install day.
Tile and waterproofing are usually the larger cost in a full remodel, and they’re priced as part of the bathroom scope, not baked into the glass number. That’s deliberate. Upfront pricing means you see each piece, and the number you see is the number you pay. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months, which makes a full bathroom rebuild easier to plan around. Your estimate and design consult are free.
Repair or replace?
Replace, in most cases. A framed unit that’s leaking at the track usually has water damage behind it that a new seal won’t fix. If the glass itself is fine but the door hinge is loose, a hardware swap is worth a call. We’ll tell you which one you’re looking at during the consult rather than upselling a replacement you don’t need.
FAQs – Frameless Glass Shower Enclosures
How much does a frameless glass shower enclosure cost in Los Angeles?
A frameless glass shower enclosure in Los Angeles typically costs $2,400 to $6,800 installed, with most standard alcove jobs landing between $3,200 and $4,600. Glass thickness, panel count, hardware finish, and whether substrate work is needed are the main drivers. Call (888) 427-1733 for an exact quote; estimates are free.
How long does installation take?
The physical installation of the glass usually takes one day, but the full timeline from templating to finished enclosure runs about 7 to 14 days because panels are fabricated off-site after measuring. If the enclosure is part of a full bathroom remodel, the glass is the last step after tile and waterproofing cure. Call (888) 427-1733 and we’ll walk you through a realistic schedule for your project.
Is 3/8-inch or 1/2-inch glass better?
3/8-inch glass is the standard for most alcove enclosures and works well when the opening is properly supported on both sides. 1/2-inch glass is the better choice for large walk-in panels, curbless layouts, and any configuration where the door is wide or the panel spans a longer opening, because the extra thickness reduces flex. We recommend based on your actual layout, not a default. Call (888) 427-1733 to talk through yours.
Can you install a frameless enclosure without replacing the tile?
Sometimes. If the existing tile is sound, the waterproofing is intact, and the walls and curb are plumb and level, a glass-only replacement is possible and we’ll template against the existing surfaces. If the walls are out of plumb or the pan is failing, the glass will never sit right and we’ll say so up front instead of installing a leak. Call (888) 427-1733 and we’ll tell you honestly which category you’re in.
Do you offer financing?
Yes. We offer 0% financing for 18 months, along with $1,000 off projects over $10,000. That’s on top of the free estimate and design consult. Call (888) 427-1733 to get started.
Why Homeowners in Los Angeles Choose Groundwork Construction Co.
We’ve been in business since 2014 and proudly serve local communities across our markets, with technicians who bring up to 12 years of experience to each job. Every technician is background-checked and arrives in uniform. Calls are answered by a live person 24/7, so you’re never stuck in a voicemail queue waiting for Monday.
Our brand partners span every trade we work in, from Kohler fixtures to the tile and hardware that frame your glass, and we work with builders like Abodu and Mighty Buildings when a project calls for prefab elements. That curated network is one reason we can promise built to last, backed in writing, and stand behind it with the 730-Day Done Right Promise. It’s one of the longest workmanship guarantees in residential construction, and it covers the enclosure we install, not just the box it shipped in.
If you’re remodeling a Los Angeles bathroom and want the shower done right, from waterproofing to the last hinge adjustment, call Groundwork Construction Co. of Los Angeles at (888) 427-1733 for a free estimate. A live person answers around the clock, and we’ll give you a straight number with no surprises.
Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles.