Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Gutters & Accessories in Culver City, CA: What the Job Actually Involves
Gutters & Accessories work in Culver City usually means replacing or re-hanging 5″ or 6″ K-style aluminum or zinc run on a 1920s – 40s Spanish bungalow, plus the downspouts, hangers, and guards that keep it functional through a wet winter and a dry fire season. A straightforward single-story re-gutter runs $1,800 – $4,200 and takes one long day. If your fascia is rotted or the original hardware is seized, expect two to three days and closer to $5,500. Call (888) 427-1733 and we’ll schedule a free on-site estimate.
How the Job Runs, Stage by Stage
Stage 1: Walk the roofline and check the fascia (day 1, roughly 90 minutes). We get on the roof and read three things: whether the fascia behind the gutter is sound, whether the drip edge is doing its job, and whether the original spikes and ferrule hangers have pulled loose. On the older Spanish stock here, they usually have. At the end of this walk you get a written line-item scope with the number you’ll actually pay.
Stage 2: Demo and prep. We lift the old run and inspect every foot of fascia. Soft or split wood gets replaced before anything new goes up, because hanging a loaded gutter off rotted fascia just moves the failure down the road. This is the stage where we sometimes find the stucco has pulled away from the wood framing underneath, and we flag it so you can decide whether to fold the patch into this job or the wider one.
Stage 3: Hang the new run. On most Culver City homes, hidden hangers screwed into solid fascia at 24″ centers beat the old spike method by a wide margin, especially during a hot dry summer where a firmly nailed spike works itself loose. We set pitch toward the downspout, seal the end caps, and cut the downspout outlets where the water can actually leave the property.
Stage 4: Downspouts and drainage. Water has to go somewhere useful. On a small Carlson Park lot, that usually means a buried extension line to the curb or a pop-up emitter at the edge of the planter. You’ll decide whether you want a simple extension, a pop-up, or a rain barrel tie-in at this stage, and we quote each option separately so you can compare.
Stage 5: Final check and cleanup. We run a hose test at each downspout, verify no leaks at the seams, and walk the perimeter with you before we leave. If guards are going on, they go on last so nothing gets trapped behind them.
Total picture: 1 day for a plain replacement, 2 – 3 days if fascia work is involved. You make three decisions along the way: fascia repair yes or no, downspout drainage type, and whether to add guards.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
What you pick here mostly comes down to how long you plan to stay and how much rain you want to see sitting in the trough.
- Seamless aluminum (5″ vs 6″). The workhorse. 5″ handles most single-story Culver City roofs fine. Step to 6″ if you have a large steep pitch or an area that dumps into one run, because the extra capacity pays for itself in the first heavy storm.
- K-style vs half-round. K-style is cheaper and matches most post-war homes. Half-round is period-correct on the Spanish bungalows, and it does look right when it’s paired with the right hangers, but it costs a bit more per linear foot and sometimes needs specialty brackets on older eaves.
- Zinc vs aluminum. Zinc lasts longer, develops a pleasing patina, and shrugs off the salt air that reaches this part of the basin. Aluminum is the value pick. On a home you plan to keep a long time, the zinc upgrade is worth pricing out.
- Guards. Mesh guards help with sycamore and ficus litter, and on the streets near Sony and Ivy Station they earn their keep in October. Skip heavy brush-style guards if you have mature trees nearby; they clog and make cleaning harder.
- Accessories. Downspout extensions, splash blocks, pop-up emitters, rain chains on a visible corner, and gutter screens. These are small line items that keep the whole system working.
What Gutters & Accessories Costs in Culver City, CA
Expect $1,800 – $4,200 for a full replacement on a typical single-story bungalow, and $5,500 or more once fascia repair or drainage work is added in. Here are the ranges we quote against:
| Line item | Range |
|---|---|
| Seamless aluminum gutter replacement (per LF) | $7 – $14 |
| Seamless zinc replacement (per LF) | $16 – $32 |
| Downspout replacement (per LF) | $8 – $18 |
| Gutter guards (per LF installed) | $6 – $22 |
| Fascia repair or replacement (per LF) | $12 – $40 |
| Downspout extension / pop-up emitter | $80 – $350 |
| Hanger upgrade (full run) | $250 – $700 |
Five things push the number from the low end toward the high end:
- Roof size and roof height. Two-story work takes longer, and safety setup adds cost.
- Existing fascia condition. Soft wood is the biggest single line item that surprises people.
- Material grade. Zinc runs roughly double aluminum per foot, and half-round adds a bit more.
- Drainage scope. Buried extension lines and emitters add meaningful cost over splash blocks.
- Access. Heavy vegetation or a tight lot in Sunkist Park adds labor for setup and haul-off.
Every written estimate is line-item, upfront, and locked. The number you see is the number you pay, and any fascia repair we discover is quoted at that point in the job, not folded in after the fact. What is not included by default: fascia repair beyond the minimum, drainage bury, and any work tied to the roof surface itself, which lives on our Roofing in Culver City page.
See the difference
Before
After
Before
After
Before
AfterWhat Culver City Homes Specifically Do to This Job
The 1920s – 40s Spanish bungalows in Carlson Park and Sunkist Park are the homes we see most on gutters & accessories calls. Many of them still have original wood lath under the stucco and thin, brittle clay tile along the roof edge, which means a gutter run has to be hung without putting weight against the tile. On the post-war ranchos near Sepulveda and Washington, the story is usually the opposite: the original aluminum has been painted and re-sealed a few times, the hangers have pulled loose, and the fascia behind it has quietly softened. If a section of fascia needs to come out, that work often touches the wider roof scope on our Roofing service, so we quote both ways. If a facade change is visible from the street in the Carlson Park Historic District, expect design review to weigh in, and we plan for that. Culver City’s years of dry summers and short, wet winters put a lot of strain on any joint, and it’s the same basic reason the area’s stucco and wood detailing need attention over time. We cover all of Culver City.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked
One day for a standard single-story replacement, and two to three days if fascia repair or buried drainage is involved. We schedule the estimate and the work in the same conversation so you know both dates up front. Call (888) 427-1733 to get your free on-site estimate.
Standard gutter replacement on an existing home typically does not require a permit. Fascia replacement tied to a larger structural or seismic retrofit can, and we’ll tell you which side of that line your job falls on before we start. If a permit is needed, we pull it and you don’t have to chase the inspection.
Yes. A straightforward re-gutter leaves everything inside the walls alone. The only place structure comes into it is if we find rotted fascia, and we flag that to you before going further. Downspout re-routing is a simple exterior change.
No. You sign a line-item quote, and that number is what you pay. If we find hidden fascia damage during demo, that’s the one place a change can happen, and it’s quoted and approved in writing before any added work. Our 730-Day Done Right Promise covers the workmanship on top of that.
Every gutter job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Material warranties come from the manufacturer and we hand you the paperwork on completion. Call (888) 427-1733 for a free estimate.
Get a Free Estimate for Gutters & Accessories in Culver City
We’ll come out to your Culver City home, walk the roofline, and put a line-item number in writing before you commit to anything. Call (888) 427-1733 and a live person will answer, day or night, and book your free estimate on a date that works for you. If you’re also thinking about a patio door or a garage door refresh while we’re on site, homeowners often pair this with Sliding & Patio Doors in Culver City or Impact Garage Doors in Culver City, and we can quote those in the same visit.
Written by the team at Groundwork Construction Co.