A Groundwork company - serving Los Angeles, CA
Iron Fence in Manhattan Beach, CA | Groundwork Construction Co. of Los Angeles

Iron Fence in Manhattan Beach - Free On-Site Quote, HOA Approval Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Manhattan Beach, CA: What the Job Actually Involves

An iron fence in Manhattan Beach runs $3,500 to $9,000 installed, and most residential runs take two to four weeks from layout to final inspection. You’re choosing between painted steel, wrought iron, and aluminum built to look like iron, set on concrete footings with marine-grade hardware that survives salt air. Plans, coastal review, and the finish schedule drive most of that number. Call (888) 427-1733 for a free on-site estimate.

Call (888) 427-1733

How a Groundwork Iron Fence Goes In, Stage by Stage

An iron fence is unforgiving. Posts that are an inch off show up at the gate. Finishes applied wrong show rust in two winters. So the sequence matters as much as the metal, and here’s how we run it on a Manhattan Beach lot.

Stage 1: Site walk and layout (day 1). We measure the property line against the plat, confirm easements and setbacks, and mark post locations with paint and stakes. You decide the fence height, the gate swing direction, and whether any section steps with the grade or runs level. On a small coastal lot, that decision is usually made right here because a stepped fence reads cleaner on a slope and a level fence looks more formal on flat ground.

Stage 2: Utility locating and permitting (days 2 to 10). We call for utility marking before anyone digs. If your project needs a permit or coastal review, this is the waiting window, and it’s the stage that most affects the calendar. You’ll review and sign the plot plan during this stretch.

Stage 3: Demolition and footing prep (days 1 to 2 on site). Old fencing comes out, holes get dug to depth, and footings get set in concrete. Footings cure before the posts go in, so the crew typically pours and leaves. Most jobs use Sakrete for the footings when the mix needs to match local soil and drainage conditions.

Stage 4: Posts, panels, and gates (days 2 to 4). Posts are set plumb, rails and pickets go up, and the gate gets hung and adjusted. You walk the line with the crew lead and flag anything that doesn’t sit right before finish work begins.

Stage 5: Finish and inspection (days 1 to 3). Touch-up, hardware check, and the final inspection if one was required. We schedule the walkthrough with you and hand over the maintenance notes. Most iron fences get their first recoat in five to seven years depending on exposure.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

The metal choice, not the size, moves the price and the lifespan most. Here’s the honest read on each:

  • Painted steel: The workhorse. Strong, repairable, and the least expensive per linear foot. It needs recoating every five to seven years in salt air, and any scratch left bare will rust.
  • Wrought iron: Heavier, hand-forged look, and the finish that reads most like a custom estate fence. Expect the high end of the range and a longer lead time. It still needs maintenance.
  • Aluminum built to mimic iron: Lighter, powder-coated, and the most corrosion-resistant of the three in coastal conditions. The trade-off is weight and a slightly less substantial feel at the gate.
  • Finish and color: Powder coat holds up best near the water. Wet-paint finishes cost less up front and need attention sooner.
  • Hardware and fasteners: Stainless or marine-grade only west of Highland and around the Strand. Galvanized fasteners fail fast in salt air.
  • Gates and automation: A pedestrian gate is standard. A driveway gate with an opener adds real cost and needs power at the hinge post, so decide before the concrete cures.

Homeowners often pair this with hardscape work at the same time, and we handle Patios, Walkways & Pool Decks in Manhattan Beach on the same visit so footings and finish grades line up.

What an Iron Fence Costs in Manhattan Beach, CA

Expect $3,500 to $9,000 for a typical residential iron fence in Manhattan Beach. Here’s what shifts the number:

Line item Typical range
Painted steel fence, standard run $3,500 – $6,500
Wrought iron or custom iron fence $6,000 – $9,000
Driveway gate with opener Adds to the total; quoted separately
Demolition and haul-off of old fence Varies with run length and material

What pushes a job to the high end: total linear feet, grade changes that force stepping, marine-grade finish and hardware, a driveway gate with power, and any permit or coastal review. What keeps it low: a straight run, a simple pedestrian gate, and a straightforward property line with no utility conflicts.

A written estimate itemizes fence length, metal type, finish, footing spec, hardware, gate count, and whether permits are included. What usually sits outside the quote: landscape repair along the line, gate automation wiring if power isn’t already at the post, and any work that overlaps an ADU Design & Permitting in Manhattan Beach project on the same lot.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Manhattan Beach Homes Specifically Do to This Job

Manhattan Beach is a teardown-and-rebuild town. Most of the properties we work on are custom single-family homes on small coastal lots, and the strict height, floor-area, and setback rules that shape those builds also shape the fence. Property lines sit close to the structure, so an iron fence has to be laid out precisely or it crowds a side yard that’s already tight.

Then there’s the salt. West of Highland and around the Strand, salt-laden air eats through galvanized fasteners and untreated steel within a few years, so we specify stainless and marine-grade hardware as standard on those streets. The marine-layer humidity and onshore wind mean a finish applied thin will fail early. Rain comes in concentrated winter storms, and the fence line along a drainage swale is where we see footing erosion first.

Older beach cottages on raised foundations need their property line checked against a current survey before we dig, because decades of lot line adjustments sometimes don’t match the plat. If you’re planning the fence as part of a Fence Installation in Manhattan Beach project that includes other fencing types, we scope the whole line at once.

Serving Manhattan Beach, CA – Our Local Coverage Area

We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked About Iron Fence in Manhattan Beach

Get a Free Iron Fence Estimate in Manhattan Beach

We come out, measure the line, check the survey and coastal considerations, and hand you a written, line-item estimate with a fixed price. You’ll know the metal, finish, hardware, and timeline before you commit. Call (888) 427-1733 to schedule your free estimate. Calls are answered by a live person, 24/7. We cover Manhattan Beach and treat every job as part of our Fence Installation work.

Written by the team at Groundwork Construction Co.

Why Manhattan Beach Chooses Groundwork Construction Co. of Los Angeles

We set the standard for iron fence in Manhattan Beach.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Manhattan Beach

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Manhattan Beach Customers Say

Trusted by homeowners across Manhattan Beach and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Iron Fence in Manhattan Beach?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Manhattan Beach.

(888) 427-1733

Request a Free Estimate in Manhattan Beach

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch