A Groundwork company - serving Los Angeles, CA
Iron Fence in Santa Monica, CA | Groundwork Construction Co. of Los Angeles

Iron Fence in Santa Monica - Free On-Site Quote, HOA Approval Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Santa Monica, CA: What It Costs and What You Get

A wrought iron fence in Santa Monica, CA typically runs $3,500 to $9,000 for a standard residential front-yard run, and most jobs are built over two to four working days once the material arrives. That number covers materials, fabrication, setting posts in concrete, and finish. The range is wide because iron fencing is a custom job – length, height, and the finish you choose move the number more than anything else. Call (888) 427-1733 for a free on-site estimate, and we’ll put a written, fixed price in front of you before any work starts.

Call (888) 427-1733

How a Santa Monica Iron Fence Gets Built, Stage by Stage

Iron fencing isn’t a truck-and-grab job. It’s measured, fabricated, and set with care, and knowing the sequence helps you plan around it.

  • Stage 1 – Site visit and measurement (about an hour). We measure the exact run, check grade changes, note where the fence meets existing walls or gates, and confirm property line. On the 90402 flats north of Montana, where lots often sit behind hedges and old stucco walls, we spend extra time on where the new fence ties into existing masonry. You decide the height and where gates go at this stage.
  • Stage 2 – Written quote and design sign-off (1-2 business days). You get a line-item price: so many linear feet, this finish, this post spacing, gates priced separately. You pick the profile and finish here, and that decision is locked before fabrication begins.
  • Stage 3 – Fabrication (7-14 days). Custom panels are welded and finished at the shop. This is the longest wait, and it’s why we get measurements right the first time – a redo costs another two weeks.
  • Stage 4 – Layout and demo (day one on site). We mark post locations, remove any old fence, and dig and set posts in concrete. The concrete cures before panels go up, so there’s a natural pause here, typically a day.
  • Stage 5 – Install and finish (days two to four). Panels set, gates hung and adjusted, hardware checked, touch-up on any weld or scratch. We walk the run with you before we leave.

If the iron fence is part of a full exterior plan – new walkway, gate pillars, landscaping – homeowners often pair this with Patios, Walkways & Pool Decks in Santa Monica, so the hardscape and fencing get built together instead of in two separate passes.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Most of the decisions happen at stage two, and they’re the ones that set your price and how long the fence lasts near the coast.

  • True wrought iron vs. steel. Hand-forged wrought iron is the premium choice – heavier, richly detailed, and expensive. Most homeowners choose welded steel fabricated to look like wrought iron, which gives you the same look at a lower price and holds up well when correctly finished.
  • Powder-coat vs. paint finish. Powder coating is baked on, uniform, and the right choice for coastal Santa Monica because salt air eats through thin paint fast. It costs more upfront and lasts years longer. Field-painted iron looks fine on day one but needs recoating regularly in this climate.
  • Height and picket spacing. Standard runs are 4 to 5 feet; taller runs and tighter picket spacing raise the price per foot. If the goal is keeping a dog or small children in, tighter spacing matters.
  • Gates and automation. A swing gate, a double driveway gate, or a gate prepared for an opener are priced separately. Decide early whether you want an opener wired in, since it affects the post and hinge.
  • Post and footing spec. Deep footings set in concrete are standard; on slopes or where the fence meets a retaining wall, engineer-specified footings add cost but prevent sagging over time.

What Iron Fence Costs in Santa Monica, CA

For a typical residential iron fence here, expect $3,500 to $9,000. Here’s what pushes a job toward either end:

  • Linear feet. The single biggest driver. A short front-yard run sits near the low end; a full perimeter with side and rear runs heads toward the top.
  • Finish grade. Powder coating adds cost over field paint but pays back in coastal durability.
  • Gates. Each gate, especially an automated or double driveway gate, adds meaningfully to the total.
  • Site conditions. Slopes, old fence removal, and tying into existing masonry walls – common on the older Ocean Park bungalows – add labor.
  • Height and detail. Taller runs and ornate profiles cost more per foot than plain vertical pickets.

A written estimate from us is fixed – the number you see is the number you pay, with no change orders once work begins. It covers materials, fabrication, footings, installation, and finish. It doesn’t cover pulling a permit (if your run requires one), landscape repair beyond the fence line, or an opener and its wiring – those get quoted separately and clearly.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Santa Monica Homes Specifically Do to This Job

Salt air off Santa Monica Bay is the enemy of exterior steel, and it drives the finish decision more than anything else. Cheap paint on iron near the beach fails within a few seasons; powder coating and hot-dip galvanized components are what hold up. Add the marine layer and June Gloom dampness, and any bare weld or scratched edge rusts faster here than a few miles inland.

The housing stock shapes the work too. The 1920s-to-40s Spanish and Craftsman bungalows in Ocean Park and south of Wilshire often have original stucco garden walls and irregular lot lines, so we tie the new iron into existing masonry rather than assuming a clean run. On the 90402 flats north of Montana, larger lots behind hedges mean more linear feet and more gates. Larger property projects – additions, ADUs – frequently run alongside fencing work; homeowners planning an accessory unit often pair this with ADU Design & Permitting in Santa Monica, since the new structure changes where the fence line and gates need to go. And because a stretch of the city falls under Coastal Commission jurisdiction, anything near the beach may need coastal sign-off just to pull the permit – a reality that slows timelines and is worth checking before you order material.

Serving Santa Monica, CA – Our Local Coverage Area

We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Iron Fence in Santa Monica

Get a Free Iron Fence Estimate in Santa Monica

If you’re ready to price an iron fence, call (888) 427-1733 and we’ll set up a free on-site estimate. A live person answers, day or night, and we’ll measure your run, talk through finish and gate options, and hand you a fixed written price with no surprises. For the wider project, see our Fence Installation in Santa Monica page, or explore our full Fence Installation service and the Santa Monica area we cover.

Written by the team at Groundwork Construction Co.

Why Santa Monica Chooses Groundwork Construction Co. of Los Angeles

We set the standard for iron fence in Santa Monica.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Santa Monica

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Santa Monica Customers Say

Trusted by homeowners across Santa Monica and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Iron Fence in Santa Monica?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Santa Monica.

(888) 427-1733

Request a Free Estimate in Santa Monica

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch