Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Calabasas, CA: What It Costs and How Long It Takes
Metal roofing in Calabasas runs $15,000 – $40,000 for a typical foothill home, and most installs take 5 to 10 working days once permits clear. You’re choosing between standing-seam panels and exposed-fastener systems, and on a hillside lot the price swings more on access, slope and fire-rated spec than on the metal itself. Call (888) 427-1733 for a free on-site estimate with a written line-item quote.
How a Metal Roof Goes On: The Stage-by-Stage Sequence
Every job here starts with a site visit, not a sales call. Here’s the real order of operations and what you decide at each step.
- Days 1 – 2: tear-off and deck inspection. We strip the old roofing down to the sheathing, then check for rot, soft spots and failed fasteners. On 1960s and 1970s ranch homes, we routinely find water-damaged sheathing that needs replacement before any metal goes down. You’ll see photos and approve any added decking before we continue.
- Day 2 – 3: underlayment and flashing. A high-temp synthetic underlayment goes over the deck, then we fabricate and set valley, ridge and penetration flashing. This is where leaks start when it’s rushed, so we don’t.
- Day 3 – 5: panel layout and install. You’ve already picked panel type and color. We lay out panels for balanced reveals, fasten them to the structure, and keep the seams and terminations clean.
- Days 5 – 7: trim and ridge. Ridge caps, rake trim, eave closures and gable trim go on. On steep canyon lots this stage takes longer because access and staging are harder.
- Final day: walk-through and inspection. We walk the roof with you, check every flashing point, and hand over the warranty paperwork. If the project needs a building permit, we schedule the inspection.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
The system choice drives both the number and how the roof performs through a Calabasas summer. Here’s the honest trade-off on each.
- Standing-seam panels: the premium pick. Concealed fasteners, clean vertical lines, and the best leak resistance over the long haul. Higher material and labor cost. It suits the Mediterranean and Spanish-style estates around The Oaks and Calabasas Hills, where a flat-profile metal look can be spec’d carefully.
- Exposed-fastener panels: the value option. Faster to install and lower cost per square, with visible screws and washers. Works well on outbuildings and simpler rooflines, but washers can degrade over time on sun-exposed faces.
- Stone-coated steel: a tile-profile metal with a granule finish. Delivers a traditional look with metal durability. Heavier and pricier than a standard panel, and finish quality varies a lot by maker.
- Color and finish: a factory finish holds up best against UV and marine-influenced air. You’re picking from a color range and deciding whether a reflective, cool-roof finish matters to you.
The metal itself is only part of the durability story. We install to Chapter 7A ignition-resistant standards, and our systems pair with GAF and CertainTeed underlayment and accessory components. Every install is backed by our 730-Day Done Right Promise, so if something isn’t right, we make it right.
What Metal Roofing Costs in Calabasas, CA
Expect $15,000 – $40,000 for a metal roof install in Calabasas. That’s a wide band because this roof type is more sensitive to the specifics of your house than almost any other job. Here’s what moves the number:
- Roof size and pitch: larger footprints cost more, and steep canyon-lot roofs take longer and need more staging safety.
- Existing condition: a roof over failed or rotted sheathing means added decking and labor. We catch this at tear-off, not three months later.
- Panel type: standing-seam and stone-coated steel sit at the top of the range. Exposed-fastener panels sit near the bottom.
- Access and slope: hillside homes need scaffolding, staging and sometimes crane work, which adds cost that a flat-lot roof doesn’t carry.
- Permit and fire-code scope: a roof in a Very High Fire Hazard Severity Zone has to meet ignition-resistant requirements, and permit and inspection scope adds to the total.
A written estimate from us is line-item and upfront, so the number you see is the number you pay. What’s included: tear-off, decking replacement, underlayment, flashing, panels, trim and cleanup. What sometimes isn’t: structural repair found mid-job, arborist reports or oak-protection setbacks, and any grading or drainage work on sloped sites. We price those before we start, never as a surprise later. Call (888) 427-1733 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Homes Specifically Do to This Job
Calabasas sits in the Santa Monica Mountains foothills, and that single fact reshapes the metal roof conversation compared to flatland Valley work. Hillside and canyon lots mean grading, retaining walls and slope-stability review come into play; even a straightforward roof replacement may intersect with drainage on a sloped site. Then there’s wildfire code. Calabasas is in a Very High Fire Hazard Severity Zone, so a metal roof here is less of an aesthetic upgrade and more of a fire-rated system decision with ignition-resistant venting and noncombustible detailing behind it. The housing stock runs from large Mediterranean and Spanish-style estates in The Oaks and Calabasas Hills to 1960s – 70s ranch homes and canyon rebuilds. Those older ranches are where we see the most wear, and post-Woolsey Fire rebuilds in the canyons carry both WUI code upgrades and debris-flow concerns on steep slopes. And because native coast live oaks are protected under local ordinance, a project can trigger arborist reports and setbacks that touch the whole site plan.
If your project is part of a full Roofing in Calabasas scope, this page stays narrow on metal roofing; our wider Roofing service covers the rest. We work throughout Calabasas, from the foothill lanes to the canyon rebuilds, so we know these roofs before we ever knock.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Calabasas
A typical residential metal roof takes about 5 to 10 working days once permits are approved, plus permit-processing time. Hillside and canyon lots take the longer end because of access and staging. Call (888) 427-1733 for a timeline estimate on your specific home.
Yes, most metal roof replacements require a building permit, and in a Very High Fire Hazard Severity Zone the ignition-resistant spec has to be documented. We pull and manage permits as part of the job so the inspection passes. Call (888) 427-1733 to discuss your project’s permit scope.
Your written, line-item estimate is upfront and fixed, so the number you see is the number you pay. The one thing we do price before proceeding is hidden structural damage found at tear-off, which we photograph and show you first. Call (888) 427-1733 for a free estimate.
A metal roof is one of the most fire-resistant roofing systems you can install, and when paired with ignition-resistant vents and detailing it meets Chapter 7A standards for this area. It’s a smart upgrade here. Call (888) 427-1733 and we’ll walk through the spec for your home.
Our workmanship is covered by the 730-Day Done Right Promise, and manufacturer finish warranties come with the panels themselves. If it’s not done right within that window, we make it right. Call (888) 427-1733 to ask about the warranty for the system you’re considering.
Get a Free Metal Roofing Estimate in Calabasas
If you’re weighing metal roofing for a Calabasas home, start with a free on-site estimate. We’ll measure the roof, inspect the deck, and give you a written line-item quote covering panels, finish and the fire-rated spec this area requires. Call (888) 427-1733 – a live person answers around the clock – and we’ll set a time that works.
Written by the team at Groundwork Construction Co.