Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does New Window Installation Cost in Los Angeles?
New window installation in Los Angeles typically runs $5,310 to $17,700 for most homes, and that range covers real, permitted replacement work across the city. Impact-rated units, which many hillside and canyon properties now lean toward, land between $9,440 and $29,500. A single standard window swapped out averages a smaller line item within those totals; whole-house replacements sit at the top of them. What you pay depends on frame material, glass package, the number of openings, and how easy your walls are to work with.
We install windows across Los Angeles with a 730-Day Done Right Promise behind every job. The number we quote is the number you pay. Call (888) 427-1733 for a free estimate and we’ll give you an exact figure for your property, not a ballpark.
Key Takeaways
- Full window replacement in Los Angeles runs $5,310 to $17,700; impact window installation runs $9,440 to $29,500.
- Most homes have 10 to 20 openings, so per-window pricing matters more than the total when you’re budgeting.
- Los Angeles climate – coastal salt air, canyon wind, hard summer sun – drives which glass package actually makes sense.
- Stucco walls and older wood-framed homes in neighborhoods like Eagle Rock and Highland Park add labor versus newer construction.
- Calls are answered by a live person, 24/7, and estimates are free.
New Window Installation Cost Breakdown (2026)
Here’s how the numbers break down by line item for Los Angeles in 2026. Use this as a budgeting tool, then call for a firm quote on your specific openings.
| Line Item | Typical LA Cost (2026) |
|---|---|
| Single standard window, installed | $650 – $1,400 |
| Full window replacement (whole home) | $5,310 – $17,700 |
| Impact window installation | $9,440 – $29,500 |
| Vinyl frame window, installed | $600 – $1,200 |
| Fiberglass or wood frame window, installed | $900 – $1,900 |
| Sliding glass door (installed as part of job) | $1,800 – $4,500 |
| Window trim and casing | $75 – $250 per opening |
| Permit and inspection fees | $250 – $900 |
| Stucco repair around openings | $150 – $500 per window |
The biggest driver is frame material. Vinyl keeps costs down and holds up well in most Los Angeles conditions, but it can fade on a hard south-facing wall. Fiberglass and wood cost more but handle the sun and temperature swings better over 20 years. Glass package comes second: a standard dual-pane with low-E runs less than laminated impact glass, which many hillside homes and older properties near the canyons are moving toward for both safety and noise reduction.
Labor depends heavily on the wall assembly around each opening. A clean swap into an existing frame is fast. A full replacement that requires cutting back stucco, shimming a sagging frame, and matching texture takes longer, and you see it in the price. For a related whole-home upgrade, see our Los Angeles roofing replacement guide since windows and roof often get done in the same year.
What Affects New Window Installation Pricing in Los Angeles
Six things move the number more than anything else. Every one of them is specific to how windows get installed in this city.
- Stucco construction. Most homes built in Los Angeles before the mid-1990s are stucco over wood frame. Cutting stucco cleanly, flashing correctly, then matching the texture afterward is a real chunk of labor. Homes in Woodland Hills and Encino are frequently this style.
- Number of openings. A 12-window home costs less than a 22-window home, obviously, but per-window cost also drops as quantity rises because setup time gets amortized. Pricing the whole job at once is cheaper per window than doing it in phases.
- Glass package. Standard dual-pane is the baseline. Add low-E coating, argon fill, tempered glass in doors and near-floor windows, or full laminated impact glazing, and cost climbs. Impact glazing in fires and canyon zones adds real money per opening.
- Frame material. Vinyl is the budget option. Fiberglass and wood cost more. Andersen and Marvin both make high-end lines that many Los Angeles homeowners choose on architect-led remodels, and cabinet-level brand partnerships run across our other trades as well. See our kitchen remodeling in Los Angeles page for how window upgrades pair with cabinet work.
- Access and height. Second-story windows, hillside homes with narrow access on the Palos Verdes peninsula, and canyon properties where the driveway is a switchback all raise labor. A scissor lift or special rigging is sometimes necessary.
- Permits and code. Los Angeles requires permits for window replacement when you’re changing size or style. Impact-rated zones, fire zones in the Hollywood Hills, and historic Preservation Overlay Zones like Angeleno Heights add review time. Permit fees run a few hundred dollars but the paperwork affects schedule.
Our technicians have up to 12 years of experience on window and door installations, and we source Andersen and Pella among our brand partners, so we can match a glass and frame package to the way your Los Angeles home actually faces the sun.
How to Save on New Window Installation
Three real ways to bring the number down without cutting quality:
Bundle the whole house at once
Per-window cost drops when we replace every opening in one visit. Most of our Los Angeles jobs get completed in a single visit when the full scope is booked together, which saves on setup, permits, and stucco patching. If you’re doing windows in phases, price the whole job first and then decide.
Pair windows with another trade
If your roof is also near end-of-life, doing both at once spreads the labor and access cost. Same with exterior paint or a bathroom remodel in Los Angeles that’s already opening walls. We offer $1,000 off projects over $10,000 and 0% financing for 18 months, both of which help on a full-home window scope.
Choose the right glass package, not the cheapest
Standard dual-pane is fine for many rooms. Impact glazing only helps in specific spots. The trick is matching the package to the room, exposure, and any fire or canyon zone requirement, which is where a free estimate and design consult earns its keep. Call (888) 427-1733 and we’ll walk through which windows need what.
Which Window Brands Do We Install in Los Angeles?
Our window portfolio runs Andersen and Pella for the majority of residential replacements, plus select impact-rated lines for canyon and hillside properties. Both brands cover the range a Los Angeles homeowner wants: standard vinyl-clad options through high-end wood and fiberglass units for architect-led remodels. Every installation is backed by the 730-Day Done Right Promise – if something isn’t right in the two years after we finish, we come back and make it right.
For a look at how windows fit into a full exterior scope, our paver driveway in Los Angeles page shows the front-of-house picture, and our fence installation in Los Angeles page covers another piece of curb-appeal work many homeowners do at the same time.
What Does Impact Window Installation Cost in Los Angeles?
Impact window installation in Los Angeles typically runs $9,440 to $29,500 for a whole-home scope, depending on the number of openings and the frame material. Impact units cost roughly 40% to 70% more per window than standard dual-pane because of the laminated glass, heavier frames, and reinforced anchoring. The upside in Los Angeles is noise reduction from nearby freeways, better UV protection, and glazing that many canyon areas now prefer for safety during high wind events and fire seasons. If you’re on a hillside above the 101, or near Laurel Canyon or Topanga, this is worth pricing alongside standard glass.
How Long Does New Window Installation Take in Los Angeles?
A whole-home window replacement in Los Angeles typically completes in 1 to 2 days on-site once materials arrive. Lead time is the longer variable: Andersen and Pella orders usually run 4 to 8 weeks from order to delivery, and impact glazing can push toward 10 to 12 weeks on a custom size. Once we’re on-site, most Los Angeles homes get finished in a single visit. Stucco repair and exterior trim work add a second visit if the openings need texture matching. Plan for a 6 to 12 week project from signed estimate to final walkthrough.
Frequently Asked Questions About New Window Installation in Los Angeles
How much does new window installation cost in Los Angeles?
New window installation in Los Angeles runs $5,310 to $17,700 for a typical whole-home replacement, and impact-rated glazing bumps the range to $9,440 to $29,500. Per-window pricing averages $650 to $1,400 installed for a standard unit. Call (888) 427-1733 for an exact quote – estimates are free.
Is it cheaper to repair or replace windows in Los Angeles?
Repair usually runs $200 to $700 for a single broken pane, a failed hinge, or a stripped lock, so repair wins on isolated problems. Once two or more windows in the same home show fogged glass, failed seals, or difficulty opening, replacement is the better value because the cost per window drops and you gain a modern glass package. For a 12-window Los Angeles home, replacement pays back in lower cooling bills and fewer callouts within a handful of years. Call (888) 427-1733 and we’ll tell you which path makes sense for your house.
Do I need a permit to replace windows in Los Angeles?
Yes, if you are changing the size, location, or style of a window in Los Angeles, you need a permit from the Department of Building and Safety. Same-size, same-style replacements in many cases still require permitting depending on the zone. Permit fees typically run $250 to $900 and the paperwork adds roughly 2 to 4 weeks to the schedule. Historic Preservation Overlay Zones and impact-rated fire zones take longer. Call (888) 427-1733 and we’ll confirm what your address requires before you sign anything.
Can you install windows the same day in Los Angeles?
Same-day service is available for a single opening or a small scope when the replacement unit is in stock, but a whole-home replacement in Los Angeles usually needs 4 to 8 weeks of lead time for the windows to be manufactured and delivered. Most installations complete in 1 to 2 days on-site once materials arrive. Call (888) 427-1733 and our live team will check current availability for your scope.
How much does it cost to install impact windows in Los Angeles?
Impact window installation in Los Angeles costs $9,440 to $29,500 for a whole-home scope. Per-window, impact glazing runs roughly 40% to 70% more than standard dual-pane. Homes in canyon areas, hillside fire zones, and neighborhoods near the Santa Monica Mountains see the biggest benefit in noise reduction and safety. Call (888) 427-1733 for a free estimate on your specific windows.
Why Homeowners Choose Groundwork Construction Co. for Window Installation in Los Angeles
Windows are one of those upgrades that either quietly performs for 20 years or creates a nagging problem you fight with every winter. The difference is in the details: proper flashing, correct shimming, and a warranty you can actually reach. That’s the whole reason we put the 730-Day Done Right Promise in writing. If something isn’t right, we make it right.
We’ve been in business since 2014, backed by brand partnerships with Andersen, Pella, and dozens of others across every trade. Technicians are background-checked and arrive in uniform. Calls are answered by a live person 24/7 – never a voicemail. And every job gets no-hassle upfront pricing: the number you see is the number you pay.
Our full-scope capability means we can handle the windows, the roof, the exterior paint, the fence, and the driveway as one coordinated project from foundation to finish line. We cover the Los Angeles service area and neighboring communities including Pasadena, Long Beach, Glendale, Santa Monica, Torrance, Burbank, and Pomona. To see how a full exterior scope comes together, our home additions and ADU work in Los Angeles and our home services overview page are both useful starting points.
Get a Free Window Installation Estimate in Los Angeles
Call (888) 427-1733 for a free project estimate and design consult. We’ll measure every opening, talk through glass and frame options, and put a firm number in front of you. Customers save $1,000 off projects over $10,000, and 0% financing for 18 months makes a whole-home scope easier on the budget. Live person, 24/7. Upfront pricing, no surprises. From foundation to finish line.
Pricing reflects the Los Angeles market as of 2026. Groundwork Construction Co. of Los Angeles offers free estimates – call (888) 427-1733.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan