Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Driveway Installation Cost in Los Angeles?
Paver driveway installation in Los Angeles typically costs $8,260 to $21,240, with most homeowners landing near the middle of that range for a standard two-car driveway. Square footage drives the number more than anything else. If you’re working with a steeper slope, a clay-heavy lot, or a premium paver like Belgard, budget toward the top end.
We’ve pulled these figures together from the Los Angeles market as of 2026. They reflect what a real driveway here costs once you account for demolition, grading, base material, drainage, and paver installation. What they don’t account for is a contractor’s idea of “close enough,” which is why we put every number in writing before a single paver is laid.
Paver Driveway Installation Cost Breakdown (2026)
Here’s how the money actually breaks down for a typical Los Angeles paver driveway. The total range is $8,260 to $21,240, and it depends on size, paver type, and site conditions. If you’ve been burned by vague bids before, this table gives you a checklist to hold any contractor to.
| Line Item | Typical Los Angeles Range (2026) |
|---|---|
| Old surface removal & haul-off | $600 – $1,500 |
| Excavation & grading | $700 – $1,800 |
| Base material (gravel/sand, compacted) | $900 – $2,200 |
| Drainage & slope correction | $400 – $1,600 |
| Paver material (Belgard, standard set) | $3,000 – $8,500 |
| Paver material (premium or large-format) | $4,500 – $11,000 |
| Installation labor | $1,800 – $4,500 |
| Edge restraints & sand finish | $300 – $900 |
| Permits (when required) | $150 – $600 |
| Total installed | $8,260 – $21,240 |
A standard 20×20 driveway (about 400 square feet) usually lands near the lower part of that total range. A long, narrow hillside driveway in the Hollywood Hills or a big circular drive in Hancock Park will push toward the top. The paver company rep matters too. Two crews quoting the same Belgard product can come in thousands of dollars apart based on how they plan the base.
What Affects Paver Driveway Installation Pricing in Los Angeles
Los Angeles isn’t a one-size-fits-all market. The specific piece of ground under your driveway changes the bid more than most homeowners expect. Here are the factors that move the number up or down.
- Square footage and driveway shape. Straight drives are simpler and cheaper per square foot. Curves, turnout aprons, and border patterns add labor time. A 200-square-foot drive and a 700-square-foot drive don’t share a price.
- Slope and topography. Hillside lots in the Hollywood Hills, Mount Washington, and the Cahuenga Pass need real retaining and drainage work before pavers go down. We see more slope-related failures in these neighborhoods than anywhere else, usually because a previous installer skipped structural base prep.
- Soil conditions. Some Los Angeles lots sit on expansive clay (especially in the San Fernando Valley and parts of Mid-City), which swells when it’s wet and shrinks in the dry months. That clay needs deeper excavation and a properly compacted aggregate base, or pavers shift within a season or two. On the flip side, well-drained sandy soil in Santa Monica and the Westside sometimes means less base depth.
- Paver material selection. Belgard and similar premium brands cost more than entry-level concrete pavers, but they hold color and shape longer, which matters in LA’s UV load. Premium large-format pavers cost more to install because edge cuts, handling, and labor time increase.
- Drainage and grading requirements. LA’s dry summers and sudden winter rainstorms mean every driveway needs a real plan for where water goes. That could mean surface grading, a channel drain, or a dry well. Skipping it is what causes most driveway callbacks.
- Old surface and haul-away. Tearing out a rooted asphalt or concrete driveway takes time and truckloads. A driveway already stripped to base is cheaper to start. Old-surface removal and dump fees usually run $600 to $1,500 on a typical LA-sized drive.
- Access and staging. Narrow driveways, tight alleys, and street parking restrictions near busy corridors (think Sunset Boulevard or Robertson) can slow a job and add labor time. A wide-open lot in Granada Hills installs cleaner than a tight alley access in silver-lined subdivisions.
- Permits and city requirements. Some LA driveway projects require a permit, especially when the work touches the public right-of-way, changes the curb cut, or alters drainage toward the street. Permit costs usually run $150 to $600. A contractor who skips the permit can save money on paper and leave you with a problem on record later.
How Do Paver Driveways Compare to Concrete and Asphalt in Los Angeles?
Pavers cost more up front than concrete or asphalt. The trade-off shows up ten years in.
- Paver driveway: $8,260 – $21,240 installed.
- Concrete driveway: $5,310 – $14,160 installed. Cheaper now, cracks more in LA’s thermal swings and expansive clay.
- Asphalt driveway: $4,130 – $10,620 installed. Cheapest up front, needs sealing every few years, softens in high sun.
If you’re still weighing materials, our driveway replacement guide walks through a full tear-out and rebuild, and our concrete driveway installation page covers the budget-friendly alternative in detail.
What pavers give you that the others don’t: individual units you can pull and reset instead of a slab you replace. A cracked concrete slab means a whole panel gets demoed. One damage point on the paver driveway means a single paver gets swapped. In a city that sits on active geology, that’s not a small thing.
Why Paver Driveways Suit Los Angeles Homes
Los Angeles is the kind of place where a driveway works hard and looks good doing it. Two cars live on it, the sun beats on it, and Southern California’s dry season pushes design choices concrete doesn’t handle as well. Pavers stay cooler underfoot than dark asphalt (a real deal in August). They let water pass through the joints, which helps on lots where drainage is tight. And they hold up to the region’s ground movement and occasional earthquake settling better than a rigid slab.
That matters for curb appeal in a market where front elevation drives value. A clean paver driveway sets off a Spanish Revival in Los Feliz or a mid-century in Sherman Oaks the way a faded asphalt strip never will.
If you want to pair the driveway with matching hardscape, our paver patio installation page covers backyard work, and the team can quote both together.
How to Save on Paver Driveway Installation
You can bring the number down without cutting corners that cost you later. A few practical moves:
- Bundle driveway and patio. Combining a driveway with a paver patio (or with a fence project) spreads base prep, delivery, and mobilization across more square footage. That lowers the per-square-foot cost while keeping material and install quality exactly the same.
- Choose standard Belgard lines over specialty finishes. Color-blend and large-format pavers look great and cost more. A standard layout in a solid color is a real savings with the same longevity.
- Schedule work in the shoulder season. Late winter and early spring (after the rainy season, before the summer rush) can make a difference in labor availability, especially in the Valley and Westside.
- Fix drainage during the build, not after. Grading and a channel drain done up front cost a few hundred dollars. Water under a failed driveway cost thousands. Do it once, right.
- Ask about upcoming promotions. Groundwork Construction Co. offers $1,000 off projects over $10,000 and 0% financing for 18 months, which takes a real bite out of the out-of-pocket cost on larger driveways. Most paver driveways here qualify on the size end.
- Get an itemized quote, not a lump sum. A price broken down line by line tells you where the money goes and lets you compare apples to apples across bids. It also gives you a written record if something changes mid-project.
Every estimate from our team comes with a free on-site project consult. Call (888) 427-1733 and a real person picks up, day or night. No voicemail. No waiting until Monday.
What’s Included in a Groundwork Paver Driveway Project
Here’s what you’re actually buying with our process. Every project starts with a walkthrough: measuring the driveway, checking slope, testing the base, and identifying drainage needs before any numbers go in writing. Then we lock in a fixed price that doesn’t change unless the scope changes, and that change gets signed off before work continues.
On install day, a background-checked, uniformed crew shows up with the game plan and the materials. Most standard driveways are a multi-day job given base compaction, paver-setting, and finish time, and we don’t leave a half-set driveway unsecured if the weather turns.
Every paver driveway we install is backed by our 730-Day Done Right Promise – one of the longest workmanship guarantees in the residential construction space. If anything shifts, settles, or fails in that window, we make it right. The materials we use, including Belgard pavers, come from a curated set of trusted brand partners, so you’re choosing between quality options, not just what’s on the truck. If you’re also thinking about fencing the property line or adding a gate to the drive, our fence installation page covers the options and how to time the work together.
For the bigger picture of everything we handle from foundation to finish line – kitchens, baths, roofing, windows, additions, and ADUs – see the Groundwork home page. To see every service area we cover and how paver work fits into the wider Los Angeles project set, the Los Angeles service area page is the place to start.
How Long Does a Paver Driveway Last in Los Angeles?
A properly installed paver driveway lasts 25 to 30 years or more in Los Angeles, often longer with regular maintenance. The variable isn’t the paver; it’s the base. Compaction, drainage, and grading done right mean the driveway handles LA’s thermal cycles without shifting. That’s why we don’t quote driveways on a square-foot basis alone without looking at the ground under them.
Basic upkeep is simple: keep the joints sanded once a year, rinse the surface, and call us if a paver pops. On our estimates you’ll see a maintenance note tied to the specific driveway, not a generic sheet.
FAQs – Paver Driveway Installation Cost
How much does a paver driveway cost in Los Angeles?
Paver driveway installation in Los Angeles runs $8,260 to $21,240 for most residential projects, with the middle of the range being typical for a standard two-car drive. Size, site slope, and paver material move the number. Call (888) 427-1733 for an exact quote. Estimates are free and upfront.
How long does installation take?
Most Los Angeles paver driveways are finished in a few days to about a week, depending on footage, base prep, and drainage work. Demolition and grading take one or two days; paver-setting and finishing take the rest. You’ll get a schedule in writing before work starts.
Is paver cheaper than concrete or asphalt?
No, pavers cost more up front. A paver driveway here runs $8,260 to $21,240, versus $5,310 to $14,160 for concrete and $4,130 to $10,620 for asphalt. Pavers win on longevity and repair flexibility, so the long-run cost per year of service is usually lower. Call (888) 427-1733 to see the difference on your lot.
Do I need a permit for a paver driveway in Los Angeles?
Sometimes. A straight replacement within the existing footprint often doesn’t need one. Work that touches the public right-of-way, modifies a curb cut, or changes drainage toward the street usually does. Permit costs typically run $150 to $600. We confirm the requirement for your address before quoting the job.
Does Groundwork Construction Co. offer a warranty on paver driveway work?
Yes, every project is covered by our 730-Day Done Right Promise. If anything we installed fails within that window, we make it right. It’s one of the longest workmanship guarantees in the residential construction space, and it applies to every paver driveway we build. Call (888) 427-1733 with questions about coverage or to schedule a free estimate.
Ready to Get a Straight Number on Your Paver Driveway?
Pricing a paver driveway shouldn’t feel like pulling teeth. If you want a fixed, upfront number for your Los Angeles driveway, our team is ready to walk your property, check the ground, and give you a real quote you can compare against any other bid. Our technicians bring up to 12 years of hands-on experience to every job, and every project is covered by the 730-Day Done Right Promise.
Call (888) 427-1733 for a free estimate. A live person answers 24 hours a day, 7 days a week. You’ll get a free design consult, a fixed price that doesn’t change, 0% financing for 18 months, and $1,000 off if your project comes in over $10,000. Built to last, backed in writing.
Pricing reflects the Los Angeles market as of 2026. Groundwork Construction Co. of Los Angeles offers free estimates – call (888) 427-1733.
What Our Customers Say
"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan