A Groundwork company - serving Los Angeles, CA

Paver Driveways in Los Angeles, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Paver Driveways in Los Angeles, CA

A paver driveway in Los Angeles typically costs $12 to $26 per square foot installed, which works out to roughly $9,600 to $20,800 for a standard two-car driveway of about 800 square feet. Pavers are individual clay, concrete or stone units set on a compacted base, so they flex with the ground instead of cracking the way poured concrete does, and a single damaged brick can be lifted and replaced without touching the rest. That matters in Los Angeles, where clay soils swell and shrink through the dry season and then shift again after the first winter rain. Groundwork Construction Co. of Los Angeles installs paver driveways with Belgard and other verified hardscape brands, handled as part of our wider Driveway & Pavers in Los Angeles work, and every job carries our 730-Day Done Right Promise. Call (888) 427-1733 and a live person answers, day or night.

We’ve spent years working Los Angeles properties, and the failures we see aren’t usually in the pavers themselves. They’re underneath. A driveway that puddles at the apron, sinks (settles unevenly) near the garage door, or grows weeds through the joints almost always traces back to a base that wasn’t excavated deep enough or a slope that was never set to drain away from the foundation. Los Angeles gets maybe 15 inches of rain a year, but it tends to arrive in a handful of hard storms, and a driveway pitched the wrong way sends that water straight into the garage or the footing. We build for that.

What sets a paver driveway apart from concrete or asphalt

Concrete is a single slab. When the ground moves, it cracks, and the crack runs across the whole pour. Pavers are a system of small units with sand-filled joints, so movement distributes between them. A proper installation also lets water drain through the joints into the base rather than sheeting off the surface, which cuts down on the runoff that stains stucco and floods parkways. On hillside lots in Mount Washington and Glassell Park, that drainage behavior is often the deciding factor between pavers and a poured slab.

We also see a lot of Los Angeles homes where the driveway is the largest visible hardscape on the property. It’s what a visitor sees before the front door. Pavers in a running bond, herringbone or ashlar pattern change the whole look of the front elevation in a way asphalt never will, and the material holds its color through years of sun exposure.

When You Need Paver Driveways

Homeowners call us about paver driveways in Los Angeles for a handful of recurring reasons. If any of these sound familiar, it’s worth having us look before the problem gets more expensive.

  • Your concrete driveway has cracked or heaved. After a few dry summers and a wet winter, slabs in the San Fernando Valley and along the Eastside often lift at the joints. Once a slab cracks through, patching is a temporary fix. A paver system built on a properly compacted base handles that seasonal movement without splitting apart.
  • Water pools near the garage or along the foundation. A driveway that slopes toward the house instead of away from it pushes stormwater where you don’t want it. We re-grade the subgrade and set the finished slope so runoff leaves the property.
  • You’re planning a larger yard or hardscape project. A paver driveway ties into walkways, patios, retaining walls and fences. Doing it alongside other exterior work means one crew, one plan and one guarantee instead of three contractors blaming each other.
  • You’re adding an ADU or reworking the front of the house. An accessory dwelling unit means more vehicles and more foot traffic, and the driveway often needs to be widened or rebuilt to code. We coordinate driveway work with our Home Additions & ADU projects so the access path, utilities and grades all line up.
  • You want curb appeal that holds up. Buyers notice a driveway. A paver surface in a warm stone or clay tone reads as a finished, cared-for property, and it doesn’t fade and gray out under Los Angeles sun the way asphalt does.
  • Weeds are pushing through old joints. Weedy cracks and settling sand usually mean the base has failed or the wrong joint sand was used. We rebuild the section rather than top-dressing over a problem that will return.

Our Paver Driveways Process

Every paver driveway we install in Los Angeles follows the same sequence, because the layers under the surface are what make the surface last. Here’s how the work runs, start to finish.

  1. Site visit and free estimate. We walk the driveway, check the slope and drainage, look at the soil and existing base, and talk through patterns and colors. You get upfront pricing with the full scope written out, so the number you see is the number you pay.
  2. Design and material selection. We help you choose pavers from our verified brand partners, including Belgard, and settle on a layout. Driveway pavers need to be rated for vehicle loads, so we steer you toward the right thickness and finish for a driveway rather than a walkway. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000.
  3. Demolition and base prep. We remove the old surface and excavate deep enough for the base, typically 6 to 8 inches of compacted aggregate, more on soft soil. This is the step most shortcuts skip. We compact in lifts, not all at once, and set the subgrade slope to move water away from the house.
  4. Edge restraint and bedding layer. A restrained edge keeps the field from spreading under load. We set a compacted bedding sand over the base and screed it to grade before any paver goes down.
  5. Paver installation and cutting. We lay the pattern, cut units cleanly at borders and around drains, and set the surface to the final slope. Expect noise and deliveries during this stage; most residential driveways take a few days depending on square footage and access.
  6. Joint sand, compaction and final inspection. We sweep polymeric or kiln-dried sand into the joints, compact the field one last time, and clean off. Then we walk the finished driveway with you and confirm drainage, pattern and edges.

Because we handle the whole envelope of a home’s exterior, a driveway project often folds into fence, walkway or patio work without a second contractor stepping in. If your project is part of a bigger exterior plan, take a look at our Fence Installation and general home construction services to see how it all connects.

Key Takeaways

  • Paver driveways in Los Angeles run about $12 to $26 per square foot installed; an 800 sq ft two-car driveway lands near $9,600 to $20,800.
  • The base and slope decide whether a paver driveway lasts. We excavate 6 to 8 inches and compact in lifts.
  • Every installation is backed by the 730-Day Done Right Promise.
  • Live person answers the phone 24/7 at (888) 427-1733, and estimates are free.
  • 0% financing for 18 months and $1,000 off projects over $10,000 make larger driveways easier to budget.

Paver Driveways Pricing in Los Angeles

Here’s what paver driveways cost in Los Angeles. These are the ranges we quote, broken out so you can see where the money goes. Actual pricing depends on square footage, material, base conditions and access, and you get an exact figure at your free estimate.

Line item Typical range
Paver material installed (concrete or clay pavers) $12 – $20 per sq ft
Premium stone pavers (travertine, granite, natural stone) $18 – $26 per sq ft
Removal and disposal of existing driveway $1 – $3 per sq ft
Base excavation and compacted aggregate (6 – 8 in) $3 – $6 per sq ft
Drainage correction or re-grading $800 – $3,500 per project
Edge restraint and border detail $400 – $1,200 per project
Permit and inspection (where required) $150 – $500

An 800 square foot driveway with standard concrete pavers, full removal and a new base lands around $9,600 to $16,000. A larger 1,200 square foot driveway in natural stone at the top of the range can reach $30,000 or more. What pushes a Los Angeles job toward the higher end: steep hillside lots where equipment can’t get close, long haul distances for material in tight neighborhoods, clay soil that needs deeper excavation, and pattern work like herringbone or radial cuts that takes more cutting time. What keeps it lower: keeping the existing base if it’s sound, choosing concrete pavers over natural stone, and a simple running bond layout.

We quote upfront pricing with no surprises, and we don’t pad a bid to cover a guess about what’s under the old driveway. If we find bad soil or a broken line once we excavate, we tell you before we proceed, not after. That’s where the 730-Day Done Right Promise earns its keep too: if something we installed settles or fails, we make it right. Call (888) 427-1733 for a free estimate and design consult.

What affects the cost of a paver driveway in Los Angeles?

Square footage, paver material, base depth, site access and drainage work move the price the most. Los Angeles lots with tight side yards, steep grades or heavy clay often need more excavation and hauling, which adds cost. Choosing concrete pavers over natural stone and keeping a sound existing base both bring the number down.

Do I need a permit for a paver driveway in Los Angeles?

It depends on the scope. Replacing a driveway surface in the same footprint generally doesn’t require a permit, but widening it, changing how it connects to the street or altering drainage can trigger one, and Los Angeles has specific rules about runoff and how much of a lot can be covered by hardscape. We check the requirements for your address during the estimate and handle the permit step where it applies. Call (888) 427-1733 and we’ll tell you what your project needs.

How long does a paver driveway take to install?

Most Los Angeles paver driveways take three to six days from demolition to final compaction, depending on square footage and base conditions. Small, straightforward jobs can move faster. Larger driveways, steep lots or drainage corrections take longer. We schedule the work and tell you the timeline up front.

Why homeowners choose us for paver driveways in Los Angeles

Groundwork Construction Co. of Los Angeles has been in business since 2014 and serves communities across the city with seven core service lines, from roofing and windows to kitchens, baths, fences and driveways. Our technicians have up to 12 years of experience, they’re background-checked and they arrive in uniform. Our brand partners include Belgard for pavers and hardscape, along with names like GAF, James Hardie, KraftMaid, Kohler, Andersen and Pella across the other trades, so you’re choosing quality rather than whatever’s in stock that week. Calls are answered by a live person 24 hours a day, every day, and we stand behind every project with the 730-Day Done Right Promise: if it’s not done right, we make it right.

Whether your driveway is in Boyle Heights, West Adams, Encino or the hills above Silver Lake, the approach is the same: honest pricing, a base built to last, and a written guarantee that outlasts the work. From foundation to finish line, one contractor handles it. Call (888) 427-1733 for a free estimate and design consult on your paver driveway.

Is a paver driveway worth it compared with concrete?

For many Los Angeles homeowners, yes. Pavers cost more up front than poured concrete, but they tolerate ground movement without cracking through, they drain through the joints, and a single damaged unit can be swapped out. Over the life of the driveway, that repairability often makes pavers the better value. Call (888) 427-1733 to compare costs for your property.

Can you install a paver driveway over my existing concrete?

Sometimes, if the existing slab is sound and there’s room for the added height at the apron and garage threshold. Usually, though, an old cracked slab has to come out so the new base can be built correctly. We assess the existing surface during the estimate and tell you honestly which path makes sense. Call (888) 427-1733 to schedule a look.

How do I maintain a paver driveway in Los Angeles?

Not much: sweep it, rinse it, and top up joint sand when it settles. Los Angeles sun and dry air are gentle on pavers compared with freeze-thaw climates, so maintenance is mostly about keeping the joints filled and clearing debris from drains. If a unit ever shifts, a single paver can be lifted and reset without disturbing the rest.

What’s the best paver material for a Los Angeles driveway?

Concrete pavers rated for vehicle loads are the most popular choice for their durability and price, while clay pavers hold color well in strong sun and natural stone brings the highest-end finish. The right pick depends on load, pattern and budget. We’ll walk you through options from our verified brands at your free design consult. Call (888) 427-1733.

FAQs – Paver Driveways

How much does a paver driveway cost in Los Angeles?

A paver driveway in Los Angeles typically costs $12 to $26 per square foot installed, or about $9,600 to $20,800 for an 800 square foot two-car driveway. Material choice, base depth and drainage work move the number. Call (888) 427-1733 for an exact quote, since estimates are free.

Can you install my paver driveway quickly?

Most Los Angeles paver driveways are completed in three to six days once work begins, and we schedule promptly after your estimate. Site access and base conditions affect timing. Call (888) 427-1733 and we’ll give you a realistic start date.

Is it cheaper to repair my existing driveway or replace it with pavers?

A small repair is cheaper short term, but when a Los Angeles driveway has cracked through, settled or failed its base, patching rarely lasts more than a season or two. Replacing it with a paver system built on a proper base usually costs less over the years. Call (888) 427-1733 to talk through which makes sense for your driveway.

Do you offer financing on a paver driveway?

Yes. We offer 0% financing for 18 months, and projects over $10,000 get $1,000 off. That makes a larger driveway easier to budget without pulling from savings. Call (888) 427-1733 to go over options during your free estimate.

Written by the team at Groundwork Construction Co. of Los Angeles, serving Los Angeles.

Need Construction help in Los Angeles? Licensed & insured · free written estimates
Call (888) 427-1733
Local Service Coverage

Request a Free Estimate in Los Angeles

Tell us what you need - Groundwork Construction Co. of Los Angeles responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch