Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in San Fernando, CA: What the Job Actually Involves
A paver driveway in San Fernando typically runs $7,000 – $18,000 and takes 3 to 5 working days from demo to final compaction, depending on square footage and how much base prep the old slab needs. That number covers excavation, Class II base, bedding sand, pavers, edge restraint, and polymeric joint sand. Call (888) 427-1733 and we’ll schedule a free on-site estimate, measure the actual slope and drainage, and give you a written line-item quote before any work starts.
How We Build a Paver Driveway, Stage by Stage
Paver driveways live or die on what happens underneath them. Here’s the sequence we run, and where you’ll be making decisions.
Day 1: Demo and haul-off. We break out the existing concrete, asphalt, or dirt, cut back roots that will heave the base, and haul everything to a licensed transfer station. On a typical San Fernando lot, that’s a one-day job for a two-car width. You’ll walk the subgrade with us before backfill starts – this is where we spot soft spots and where the old slab failed.
Day 2: Excavation and base. We excavate to 8 – 12 inches depending on whether the driveway takes passenger cars only or a work truck. Class II aggregate base goes in 2 – 3 inch lifts, each one watered and plate-compacted. Skipping lifts is the most common shortcut in this trade, and it’s the reason pavers rut within two summers. This stage takes a full day and is the one you cannot skip or rush.
Day 3: Grading, drainage, and edge restraint. We set the slope away from the garage and the house at roughly 2% so water moves to the street or a drain box rather than pooling at the slab edge. A concrete edge restraint goes in on the open sides; without it, the field spreads and joints open up. If a permit applies, this is the stage the city inspector wants to see the base and drainage before pavers go down.
Day 4: Paver installation. Bedding sand is screeded to a consistent 1 inch, pavers go down in the pattern you chose, cuts are made at the edges with a wet saw, and compaction runs over the finished field. Pattern and color decisions happen a week before this day so we can get the delivery on time – changing a pattern the morning of costs you a restocking charge.
Day 5: Joint sand and cleanup. Polymeric sand goes into the joints, gets compacted, misted, and cured. We walk the job with you, mark anything that needs a re-set, and leave you a maintenance sheet. Most of our paver driveways in San Fernando are wrapped in five working days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Paver selection is where the price spread and the lifespan difference both come from. Here’s what actually gets picked in this market, and the honest trade-off on each.
- Concrete pavers (interlocking). The standard choice. Roughly $7 – $12 per square foot installed. The 60mm thickness handles a passenger car and a light truck fine. Comes in dozens of colors and three or four joint patterns. Holds up to heat better than stamped concrete and can be lifted and re-set if a utility line needs work underneath.
- Clay brick pavers. $12 – $20 per square foot installed. Warmer look, blends with the older mid-century brickwork you see on bungalows here. Weight and hardness are excellent, but clay is more brittle on delivery and takes longer to set. Suits a homeowner who wants the driveway to match the house’s era.
- Permeable pavers with open joints. $10 – $16 per square foot installed. Water drains through the joints into a gravel reservoir instead of sheeting to the street. Worth considering on a tight lot where the driveway is the only place stormwater can go. Requires correct base design and periodic vacuuming of the joints.
- Thicker 80mm pavers. Adds $1 – $2 per square foot over 60mm. The right call if a heavier truck or RV regularly parks on the driveway, or if you’re paving over a base that will see any flex.
On color and finish, anything from a Belgard or equivalent product line is a safety call – the surface stays consistent from batch to batch. Ask us to see physical samples before you commit; a photo on a phone screen will not tell you what a charcoal blend looks like under Valley sun.
What Paver Driveways Costs in San Fernando, CA
For a standard two-car paver driveway in San Fernando, budget $7,000 – $18,000. Here’s the line-item breakdown for a typical job.
| Line item | Typical range |
|---|---|
| Demo and haul-off of existing surface | $800 – $2,000 |
| Excavation and Class II base | $1,500 – $3,500 |
| Pavers, 400 – 650 sq ft installed | $4,000 – $10,000 |
| Edge restraint and polymeric joint sand | $400 – $900 |
| Grading and drainage correction | $300 – $1,200 |
| Permit and inspection fees (when required) | $200 – $600 |
The five things that push a job to the high end: total square footage, whether the old base is sound or has to be dug out and rebuilt, whether the driveway slope has to be re-graded for drainage, whether you go clay brick versus concrete pavers, and the thickness grade you pick for truck traffic. A driveway that’s already at the right grade and gets torn out clean sits near the bottom of the range. A driveway over a failed slab with a low spot that pools water sits near the top.
A written estimate from us lists every line above, the paver brand and model, the base depth, and the pattern – so there’s no ambiguity when the truck arrives. What we don’t include unless you ask: relocating irrigation or a downspout, regrading the apron at the curb, or any landscape repair beyond the driveway footprint. We’ll flag those up front if they apply.
See the difference
Before
After
Before
After
Before
AfterWhat San Fernando Homes Specifically Do to This Job
San Fernando is its own incorporated city, about 2.5 square miles, with its own building department. That matters for paver driveways because your plan check and inspection run through the City of San Fernando, not LA County or the City of LA. A typical driveway job that involves new grading, a new apron at the curb, or a change in how water flows off the property may trigger a permit and a pre-paver inspection. Contractors who only work unincorporated Valley parcels routinely miss this – they pull the wrong jurisdiction’s paperwork or skip it. We confirm the permitting path before we order pavers.
The housing stock here runs mid-century and older – postwar and early-1900s bungalows and small stucco homes on tight lots. That means the driveway often shares an edge with a garage slab built in the 1950s, and the topsoil underneath has been compacted by seven decades of parking. We routinely find soft spots where the old base wasn’t properly prepared, and a paver driveway is only as good as what we replace it with. The Valley heat is the other factor: UV and summer sun shorten the life of joint sand, which is why we use a polymeric product and recommend a re-sand every few years. Our driveway & pavers service leans on that same wet-set detail on every driveway we build. Whether you have a driveway in San Fernando off a corridor like Maclay or Brand or a quiet residential block, the grading and base rules are the same.
If your project is part of a bigger exterior plan, a paver driveway often pairs well with fence work and a resurfaced apron, and homeowners often pair this with ADU Design & Permitting in San Fernando when they’re adding a unit at the back of the lot and need the access path sorted at the same time. Homeowners who are converting a garage into living space often pair this with Garage Conversion ADU in San Fernando so the new driveway and the new parking count get planned together. You can see the wider scope on our Driveway & Pavers in San Fernando page, and our Driveway & Pavers service page covers the full material range. We cover the whole of San Fernando and the surrounding Valley communities, including Santa Clarita and Stevenson Ranch.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in San Fernando
Most paver driveways in San Fernando are completed in 3 to 5 working days, with a standard two-car width landing around 4 days. A larger driveway or one that needs significant re-grading can stretch to a week. Permitting, if it applies, adds a week or two before the work starts. Call (888) 427-1733 for a realistic date range based on your lot.
Often yes, and the answer depends on whether the project changes grading, drainage, or the curb apron. Because San Fernando has its own building department, the allowability check runs through the city rather than LA County. We confirm it during the estimate and pull anything required. Call (888) 427-1733 and we’ll tell you whether your job needs a permit before you commit.
Not over the existing concrete, no – a paver driveway has to sit on a properly compacted aggregate base. Setting pavers on top of a sound concrete slab sounds cheaper, but the joints fail quickly and you lose the drainage. We tear out and rebuild the base. Call (888) 427-1733 and we’ll assess what your current surface can support.
For a standard two-car driveway, expect $7,000 – $18,000 installed. The low end is a clean tear-out over sound ground with concrete pavers; the high end involves base rebuild, re-grading, or clay brick. Call (888) 427-1733 for an exact quote – estimates are free and written line-item.
Every paver driveway we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years after handoff. That covers workmanship, base, and setting; the paver manufacturer’s product warranty runs separately. Call (888) 427-1733 and we’ll walk you through what the promise covers on your job.
Get a Free Estimate on Paver Driveways in San Fernando
Call (888) 427-1733 to schedule your free on-site estimate for paver driveways in San Fernando. A real person answers, 24 hours a day, seven days a week – no voicemail. On the call we’ll confirm your address and the driveway size, book a site visit, and on that visit we’ll measure the slope, check the base, walk you through paver options, and hand you a written line-item quote with no change-order surprises later.
Written by the team at Groundwork Construction Co.