Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Replacement in Manhattan Beach, CA: What It Involves and What It Costs
Window replacement in Manhattan Beach typically runs $4,500 to $15,000 for a whole-house package, or roughly $800 to $1,400 per opening depending on size, glass package and frame material. A standard single-story job takes one to three days once materials land; multi-story homes with second-floor or Strand-facing glass run closer to four to five days. Call (888) 427-1733 to schedule a free on-site estimate and get a written, line-item quote before anything is ordered.
How We Run a Window Replacement Job, Stage by Stage
Every window replacement we do in Manhattan Beach follows the same five-stage sequence. The stages don’t change much from job to job; the timing and the decisions you make at each one do.
Stage 1: Measure and site visit (1 to 2 hours)
We measure every opening, check the framing and sill condition, and note which windows are on a raised foundation versus slab. This is when you decide on frame material and glass package. On older beach cottages, we also look for settle cracks and dry rot around the rough openings, because those change the scope before a single unit is ordered.
Stage 2: Order and lead time (4 to 8 weeks)
Custom-manufactured windows from Andersen or Marvin take four to eight weeks to arrive; stock sizes can land faster. You sign off on the final spec sheet here: frame color, glass type, screen style, and whether you’re doing a full-frame or pocket replacement. Materials are ordered and confirmed in writing, so there are no surprises at install.
Stage 3: Permit and prep (1 to 2 weeks)
Depending on scope, replacement windows may need a building permit through the city of Manhattan Beach. We pull it, schedule the inspection, and prep the site: covering floors, moving furniture, taping off work zones. You don’t touch the permit paperwork.
Stage 4: Demo and install (1 to 3 days per floor)
We remove the old units, inspect and repair any rot or framing damage, set the new windows, flash and seal the exterior, then insulate and trim the interior. Most single-story Manhattan Beach homes are buttoned up in a day to a day and a half. Second-floor or custom-angled windows add time.
Stage 5: Inspection and walkthrough (same week)
We schedule the city inspection, walk every window with you, and confirm operation, locking and sealing. Any punch items get handled before we close the job. The work carries our 730-Day Done Right Promise, so if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Window replacement isn’t a single product; it’s a set of decisions. Here’s what actually moves the needle on a Manhattan Beach job:
- Frame material: Vinyl is the budget-friendly workhorse and holds up well in salt air. Fiberglass and aluminum-clad wood (think Andersen or Marvin) cost more but give you a slimmer profile and better long-term performance on a custom home. Wood frames look great but need repainting every few years in this climate.
- Glass package: Standard dual-pane is the baseline. Low-E coatings and argon fill cut heat gain on west-facing windows that catch the afternoon sun. Impact-rated glass is an upgrade that adds cost but is worth discussing if you’re near the water or want storm protection.
- Full-frame vs. pocket replacement: Pocket replacement drops a new sash into the existing frame and costs less. Full-frame replaces the entire window and frame, which is the right call when the original 1950s framing is rotted or you’re changing the opening size.
- Configuration: Fixed, casement, single-hung, or slider. Casement windows seal tighter but swing out; sliders save space on a tight lot. Most Manhattan Beach homes mix two or three styles.
- Hardware finish: Stainless and marine-grade hardware cost more than standard finishes but resist the salt corrosion that eats through cheaper metals in a few years.
What Window Replacement Costs in Manhattan Beach, CA
Plan on $4,500 to $15,000 for a typical whole-house window replacement in Manhattan Beach. Per-window pricing usually lands around $800 to $1,400, but the total swings based on five variables:
- Number and size of windows: A 12-window bungalow sits at the low end; a 20-plus-window custom home pushes toward the high end.
- Frame material and glass package: Vinyl with standard dual-pane is the low end; fiberglass or clad wood with Low-E or impact glass adds cost per unit.
- Existing condition: Rotted framing, settle cracks, or water damage found during demo adds repair labor.
- Access and stories: Second-floor windows, tight side yards, and scaffolding all add labor time.
- Permit scope: A permit and inspection add cost but protect resale value; we handle both.
A written estimate from us covers materials, labor, permits, disposal of old units, and cleanup. What it typically doesn’t cover is unforeseen structural repair discovered after demo – we flag that in writing before we proceed, so the number you approve is the number you pay. Ask about our 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Manhattan Beach Homes Specifically Do to This Job
On the streets west of Highland and through the Gaslamp and Strand area, salt-laden air and marine-layer humidity attack window hardware faster than anywhere inland. Galvanized fasteners, standard steel hinges and low-grade screens corrode within a few years, which is why we specify stainless and marine-grade hardware on every coastal job. That’s also why we see failure modes here that inland contractors rarely deal with: fogged glass from seal failure, pitted frames, and sticking sliders caused by corrosion rather than misalignment.
The housing stock shapes the work too. Most surviving 1950s beach cottages and bungalows sit on raised foundations with stucco and wood-frame walls, and those rough openings often need rot repair before a new unit goes in. If you’re weighing a full teardown or gut remodel, window replacement usually becomes part of a larger scope that touches framing and flashing – worth planning alongside the Windows & Doors in Manhattan Beach work and any fence or exterior updates. Homeowners often pair this with a Vinyl Fence in Manhattan Beach or an Aluminum Fence in Manhattan Beach to finish the exterior in one pass. And because Manhattan Beach is a coastal zone with height and setback rules, window changes that alter the exterior profile or opening size can trigger review – we check the scope against city requirements before ordering materials.
We cover all of Manhattan Beach, including the sand-adjacent streets and the Tree Section, and our Windows & Doors service covers the wider range of openings if you’re also replacing doors.
Serving Manhattan Beach, CA – Our Local Coverage Area
We serve Manhattan Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Window Replacement in Manhattan Beach
Most single-story homes are done in one to three days after materials arrive, plus four to eight weeks of lead time on custom orders. Second-floor and coastal custom jobs run four to five days. Call (888) 427-1733 for a timeline based on your window count.
Replacement windows that match the existing opening often need a building permit, and full-frame replacements or any change to opening size almost always do. We pull the permit and schedule the inspection so you’re not chasing city paperwork.
Yes. A pocket replacement swaps the window and sash without opening the wall, so plumbing and framing stay put. A full-frame replacement opens the rough opening and can expose rot or settle cracks, which we handle as a written change before proceeding.
Whole-house window replacement in Manhattan Beach runs $4,500 to $15,000, with per-window pricing around $800 to $1,400. Marine-grade hardware and impact glass push toward the high end. Call (888) 427-1733 for an exact quote – estimates are free.
All our window replacement work carries the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If a window we installed isn’t right, we come back and fix it.
Get a Free Window Replacement Estimate in Manhattan Beach
Call (888) 427-1733 to schedule a free on-site estimate for window replacement in Manhattan Beach. We’ll measure every opening, review frame and glass options with you, and send a written line-item quote with permits, labor and disposal included. Calls are answered by a live person around the clock, and every technician is background-checked and arrives in uniform. No pressure and no surprises.
Written by the team at Groundwork Construction Co. of Los Angeles.