Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Roof Replacement & Installation in Los Angeles: What It Actually Takes
Roof Replacement & Installation in Los Angeles generally runs $9,440 to $23,600 for a full tear-off and install on a typical single-family home, with most jobs finished in three to five working days. The price swings on roof size, pitch, the condition of the decking underneath, and the material you pick. Homes in the Hollywood Hills or Santa Monica Mountains climb toward the high end because of fire-zone detailing. Call (888) 427-1733 for a free on-site estimate and a written line-item quote.
How a Roof Replacement & Installation Job Runs, Day by Day
Most contractors wave at the process and say “we handle everything.” Here’s the real sequence, so you know what to expect and what you’ll be deciding at each stage.
Day 1: Tear-off and deck inspection
We strip the old roof down to the sheathing, usually one full layer but sometimes two on older Los Angeles homes. Dumpsters and material delivery land the day before so the crew starts clean. Once the deck is exposed, we inspect every sheet of plywood or planking. This is where surprises show up: dry rot from old leaks, undersized or spaced-out boards on 1940s Craftsman homes, or plywood delamination. You get a photo of anything that needs replacing and a per-sheet price before we touch it. Most tears take one to two days, longer if the roof is complex or has multiple elevations.
Day 2: Underlayment, flashing, and the details that leak
Synthetic underlayment goes down first, then ice-and-water membrane at valleys and penetrations. Flashings around chimneys, skylights, and vents get replaced, not reused. This is the stage that decides whether your roof stays dry for the next twenty years, so we photograph every flashing detail. On fire-zone homes in the hills, we install fire-rated underlayment here as well.
Day 3 – 4: Material install
Field shingles or tiles go on in rows, then ridge caps, then the finish details. A standard asphalt job is two to three days of actual installation. A tile or metal roof runs longer, sometimes five to seven days, because layout and fastening take more time. You’ll want to pick your material before the crew starts, since switching mid-job adds cost and downtime.
Day 4 – 5: Ventilation, cleanup, and final inspection
Ridge vents, soffit vents, and any solar attic fans get dialed in here. Proper attic ventilation matters a lot in Los Angeles; a hot attic without airflow bakes shingles from underneath and shortens roof life. Magnetic sweep for nails, then a final walkthrough with you. We finish with the inspection sign-off required for permitted work.
What you decide, and when
- Before day 1: Material, color, and financing.
- Day 1: Approve any deck replacement shown in photos.
- Day 2 – 3: Confirm any upgrades (vents, skylights) before the field is covered.
- Day 5: Final walkthrough and inspection sign-off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Your New Roof
Material choice is the biggest lever on both price and lifespan. Here’s what most Los Angeles homeowners actually pick from:
- Architectural asphalt shingles: The workhorse choice, often in the $9,440 – $14,000 range for a standard home. GAF and CertainTeed are the brands we lean on. Twenty-five to thirty-year lifespan, wide color range, and the best price-to-durability ratio. Suits most flatland and tract homes in the Valley.
- Clay or concrete tile: The look most Spanish Colonial and Mediterranean homes were built for. Heavier, so the framing has to be checked, and install takes longer. Pushes toward the upper part of the $15,000 – $23,600 range. Fifty-year-plus lifespan, excellent fire resistance, well suited to hillside homes in fire zones.
- Standing seam metal: Handled on its own specialty page, but worth noting here: our metal roof installation range runs $17,700 to $47,200. Best for homeowners planning to stay long-term and willing to pay for a forty-plus-year roof.
- Fire-rated assemblies: If your home sits in a wildland-urban interface zone, you may need a Class A ignition-resistant roof. Much of the Hollywood Hills and Santa Monica Mountains housing stock falls into this category. We build to the requirement for the fire severity zone your property sits in.
Fastener choice and ventilation are the two spots where a cheap bid often cuts corners. Ask any contractor what underlayment and flashing they’re using before you sign.
What Roof Replacement Costs in Los Angeles, CA
Expect $9,440 to $23,600 for a standard replacement, with metal installs running $17,700 to $47,200 for the full system. Five variables push the number from bottom to top range:
- Square footage and pitch: A single-story 1,200-square-foot home sits at the low end. A 2,400-square-foot, two-story hillside home with a steep pitch lands high. Steep pitches need more safety rigging and slower install time.
- Deck condition: Replacing rotted sheathing adds per-sheet cost. Dry rot is common on 1920s – 40s homes that had a slow leak.
- Material grade: Upgrading from a 25-year to a 50-year shingle, or moving to tile, adds material cost and install time.
- Fire-zone detailing: Non-combustible underlayment and ember-resistant venting are required in many hillside zones and push the assembly cost up.
- Permit scope and ventilation: Adding ridge vents or a solar attic fan adds cost. So does a permit that requires a structural inspection of the framing under tile.
A written estimate includes tear-off, disposal, underlayment, flashings, standard ventilation, and the permit. It typically does not include deck replacement (quoted after tear-off), skylights, or gutter work. Since you’re already pulling the roof permit, homeowners often pair this with Window Replacement in Los Angeles or Door Installation in Los Angeles to keep the punch list in one visit. For everything else under one roof, our Roofing service page lays out the full scope. Every job is priced upfront with no change orders and backed by the 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles Homes Specifically Do to This Job
The Los Angeles housing stock is a patchwork, and each era of home has its own roofing challenges. The 1920s – 40s Spanish Colonial and Craftsman bungalows on the flats often have original wood sheathing that needs a look before new material goes on. The postwar 1950s – 60s stucco tract homes in places like Van Nuys and Reseda typically sit on flatter pitches where flashing and ventilation details matter more than shingle grade. The hillside builds in the Hollywood Hills and Santa Monica Mountains are their own animal. The Mediterranean climate means dry, hot fire seasons and the Santa Ana winds that drive wildfire into the urban edge, so a roof in a wildland-urban interface zone increasingly has to meet ignition-resistant standards. Fire-scarred slopes also shed heavy winter rain fast, which is why drainage and grading around the roofline matter as much as the shingles. Most jobs are permitted and inspected, and we coordinate with the city on the plan and inspection flow. Homes in Los Angeles face the added layer of seismic and hillside grading rules that shape how framing and roof assemblies are detailed. The short version: Los Angeles construction is governed by some of the strictest seismic and fire-zone rules in the country, and it changes what your roof is actually built to.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Roof Replacement & Installation in Los Angeles
Most standard asphalt replacements finish in three to five working days, from tear-off to cleanup. Tile and metal jobs run five to seven days. Weather and deck replacement add time. Call (888) 427-1733 to get a timeline for your specific home on the free estimate.
Yes, most full roof replacements in Los Angeles require a building permit and inspection, and we pull it for you. Our estimate includes the permit cost and we coordinate the inspection. It’s one reason a permit-included bid is often closer to the real total than a cheaper quote without one.
In most cases, yes. A standard roof replacement doesn’t touch plumbing or framing unless the tear-off reveals deck damage or a structural issue. If the inspection shows something structural, we stop, photograph it, and give you a written price before any work continues.
Roughly $9,440 to $23,600 for a standard replacement, and $17,700 to $47,200 for metal. Material, size, pitch, deck condition, and fire-zone requirements move the price. Call (888) 427-1733 for an exact quote; estimates are free.
Every roof replacement we do is backed by the 730-Day Done Right Promise in addition to the manufacturer’s material warranty. If something isn’t right, we make it right. Ask for the warranty paperwork in writing before you sign with anyone.
Get a Free Roof Replacement Estimate in Los Angeles
A roof replacement in Los Angeles is a major decision, so we make the first step easy and low-pressure. Call (888) 427-1733 for a free on-site estimate. We’ll inspect your current roof, measure the deck, walk through material options with real prices, and leave you with a written line-item quote and a clear timeline. A live person answers every call, 24/7. Thinking beyond the roof? Our Roofing in Los Angeles page covers the full project scope.
Written by the team at Groundwork Construction Co.