Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Los Angeles, CA: What It Takes and What It Costs
Metal roofing in Los Angeles runs $17,700 to $47,200 for a typical home, and most jobs take two to five days on site once materials are staged and permits are pulled. The number depends more on roof geometry and panel type than on square footage alone. Homes on steep Hollywood Hills lots, tight alley-access parcels, or with multiple roof planes land at the high end. Call (888) 427-1733 and we’ll give you a written, line-item estimate for your actual roof, not a per-square guess.
How the job actually runs, from tear-off to final inspection
Metal roofing isn’t a one-day swap. Here’s the real sequence we follow, and what you decide at each stage.
Day 1 – Tear-off and deck inspection. We strip the old roofing down to the sheathing. On a 1950s stucco tract home or a 1920s bungalow, this is where we find out whether the deck is sound or whether we’re replacing rotted boards. You get a same-day call if the deck needs work beyond the estimate. No surprise line items later.
Day 1-2 – Deck repair and underlayment. Any soft or damaged sheathing gets replaced, then we lay a high-temp synthetic underlayment rated for metal. Metal gets hot in the LA sun, so the underlayment has to handle surface temps a standard felt can’t. This is a spec we don’t cut. You’ll see the product name on the estimate so you know exactly what’s under your panels.
Day 2-3 – Flashing and trim. Valley flashing, drip edge, vent boots, chimney and skylight surrounds. This is the stage that determines whether your roof leaks in ten years, and it’s where cheap installs fail. We fabricate or order metal flashing to match the panel profile. You decide the trim color and finish here.
Day 3-4 – Panel installation. Panels go up in runs, fastened to spec with the clip or screw system the manufacturer requires. On a standing-seam install, the seams are crimped or snap-locked, not glued. You’ve already chosen the panel and color by this point; this is execution.
Day 4-5 – Final inspection and cleanup. We walk the roof with the city inspector where the permit requires it, run a water test on flashings, and magnet-sweep the yard and driveway for fasteners. You get a walkthrough and a written completion record. The whole thing is backed by our 730-Day Done Right Promise: if something isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The metal roofing options you’ll actually choose between
Before we order anything, you pick from a short list of real choices. Here’s what each one means in practice.
- Standing seam (hidden fastener): The most watertight and longest-lived option, with clean vertical lines that suit Spanish Colonial and modern LA homes alike. Higher material and labor cost, and the install demands more skill on complex roof planes.
- Exposed-fastener panels: More budget-friendly and faster to install. The trade-off is visible screws with rubber washers that need periodic checking. Fine for outbuildings and simpler roofs, less ideal for the main house.
- Steel vs. aluminum: Steel is stronger and usually less expensive; aluminum resists corrosion better and suits coastal exposure. For homes near the water’s edge, aluminum is often the smarter long-run call.
- Kynar 500 paint finish: The factory finish that holds color through years of UV. It’s the finish we recommend by default in LA because cheaper paint chalks within a decade.
- Panel profile and color: The look matters as much as the spec. We’ll show you samples so you’re choosing from finish swatches, not a catalog photo.
What Metal Roofing costs in Los Angeles, CA
Expect $17,700 to $47,200 for a full metal roof installation on a typical Los Angeles home. Here’s what pushes a job toward the low or high end:
- Roof size and pitch: More squares, steeper pitches, and more roof planes mean more labor, flashing, and waste. A simple gable roof sits near the bottom of the range.
- Existing deck condition: A rotted deck adds sheathing replacement. We find this at tear-off and tell you before the price changes.
- Panel type: Standing seam costs more than exposed-fastener panels. Steel is generally less than aluminum.
- Complexity: Skylights, chimneys, valleys, and multiple dormers raise flashing labor significantly.
- Permit scope: A structural upgrade to handle the weight or a re-roof over existing layers changes the permit and the labor.
A written estimate lists the panel, underlayment, flashing, labor, and permit costs line by line. It does not include structural repair discovered mid-job or deck replacement beyond what we found at tear-off, and we’ll tell you the dollar amount before we touch anything. No-hassle upfront pricing means the number you see is the number you pay. We also offer 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles homes specifically do to this job
Metal roofing here answers to seismic and fire-zone rules that don’t apply in most of the country. The wildland-urban-interface fire code in the hills means ignition-resistant roof assemblies and fire-rated detailing on hillside homes in the Santa Monica Mountains and Hollywood Hills; we spec panels and underlayment that meet those standards where they apply. The combination of earthquake standards and fire detailing is what shapes a metal roof here. LA’s housing stock runs from 1920s Spanish Colonial and Craftsman bungalows in neighborhoods like Hancock Park and Silver Lake, to postwar stucco tract homes across the Valley, to dingbats and soft-story buildings still being seismically retrofitted under city mandate. On older homes we routinely find failing deck boards and dried-out flashing at dormers. The dry, hot fire season and the Santa Ana winds also push homeowners toward metal over asphalt because metal resists ember ignition and holds up through the summer UV. When the winter rains hit fire-scarred slopes, a poorly flashed metal roof shows its weakness fast, which is why we test every flashing before we call the job done. This work is part of a broader scope we handle through our Roofing in Los Angeles service, and if your wider project touches siding or windows, homeowners often pair metal roofing with Window Replacement in Los Angeles to cut heat gain at the same time.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Metal Roofing in Los Angeles
Most metal roofing jobs in Los Angeles take two to five days once the permit is issued and materials are on site. Permit approval itself can add one to three weeks depending on the scope and the city’s current load. Call (888) 427-1733 for a realistic timeline for your roof.
Yes, a re-roof and any structural upgrade generally require a permit in Los Angeles. We pull the permit and walk the inspection so you’re not managing paperwork. Call (888) 427-1733 for details on your job.
In most cases, yes, but it depends on the roof’s existing framing and the panel weight. Standing seam is lighter than tile but heavier than some shingles, and older homes sometimes need reinforcement. We assess framing at tear-off and tell you what’s needed.
Metal roofing in Los Angeles runs $17,700 to $47,200 for a typical installation, with standing seam and complex roofs at the high end. Call (888) 427-1733 for an exact line-item quote; estimates are free.
Our work is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. The panel manufacturer’s warranty covers the material itself, and we hand you the paperwork on completion. Pair the roof with Impact Windows & Doors in Los Angeles and you’ve covered both the top of the envelope and the openings. For the full scope of what we do around the house, see Roofing and our broader service across Los Angeles.
Get your free metal roofing estimate
Call (888) 427-1733 for a free on-site estimate for metal roofing in Los Angeles. A live person answers any hour, any day. We’ll walk your roof, measure it, and hand you a written, line-item quote for the panel, underlayment, flashing, and permit cost. Your price is fixed before we start. If it’s over $10,000, the $1,000 discount applies, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.