Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Los Angeles: What They Cost and How Long They Take
Patios, walkways & pool decks in Los Angeles typically run $4,130 to $12,980 for a paver patio, with most single-family backyards landing between $7,000 and $10,500 once base prep and drainage are included. A straightforward hardscape job takes 3 to 7 working days from demolition to sealer, longer if we’re tying into an existing pool coping or regrading a slope. Call (888) 427-1733 for a free on-site estimate.
How a Los Angeles hardscape project actually runs, day by day
We don’t hand you a schedule and disappear. Here’s the real sequence, including the moments where you have to make a call.
Day 1: Layout, utilities check, and demolition
We walk the yard with you and stake the outline, then call 811 for utility marking before anything gets cut. Demo comes next: breaking out old concrete, lifting tired pavers, pulling weeds and root mass. On an average 400-square-foot backyard patio, demolition is one day. You’ll decide here whether to widen the footprint by a foot or two while the ground is open. It costs less now than later.
Day 2: Excavation, grading, and drainage
We excavate 6 to 9 inches, then grade for slope away from the house. Los Angeles patios need positive fall of at least 2 percent away from the foundation, and pool decks need to shed water toward a drain or a lower deck edge, never into the pool shell. If your yard sits below street grade or slopes hard, this is the day we set a channel drain or a dry well. Budget a full day, sometimes two on a hillside lot.
Day 3: Base compaction and edge restraint
Class II base rock goes in lifts, compacted to 95 percent density with a plate compactor. This is the step cheap crews skip and the step that determines whether your patio is still flat in five years. Edges get aluminum or concrete restraint so the field doesn’t creep. You’ll confirm the paver pattern and border here if you haven’t already.
Days 4 – 5: Setting pavers, stone, or deck coating
A two-person crew lays roughly 250 to 400 square feet per day, so a 400-square-foot patio is a day and a half of setting. Natural stone or a herringbone pattern slows that down about 30 percent. Pool decks around an existing shell need cuts and coping work, which adds a half-day.
Day 6 – 7: Polymeric sand, sealing, and final walkthrough
We sweep polymeric sand into the joints, activate it with water, and let it cure overnight. Sealer goes down 24 to 48 hours later if you chose it. The final walkthrough is where we hand you a written punch list and confirm every line item in the estimate is done. Nothing gets signed off until you’ve walked it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
- Interlocking concrete pavers (Belgard, for example): $7 to $14 per square foot installed. The most forgiving choice on a Los Angeles slab that might shift, because individual units can be pulled and reset. Good for walkways and patios that see foot traffic and furniture.
- Natural stone (flagstone, travertine, bluestone): $12 to $28 per square foot. Cooler underfoot, which matters on a pool deck in August. It’s heavier, needs a thicker base, and a few stones will spall or stain over a decade. Travertine holds up best around chlorinated and saltwater pools.
- Poured and stamped concrete: $8 to $16 per square foot. Cheapest per foot, but it cracks in the Los Angeles heat. We cut control joints on a 10-foot grid, and even then it’s the least repairable option.
- Cool-deck and acrylic pool coatings: $6 to $12 per square foot. The surface stays noticeably cooler in direct sun, which is why we use it under the pool deck rather than around a dining patio. It needs recoating every 5 to 7 years.
- Permeable and gravel systems: $5 to $10 per square foot. Best for side yards, dog runs, and anywhere you want water to soak in rather than sheet off. Cheaper to install, more maintenance to keep looking sharp.
The honest trade-off: pavers and stone cost more up front and last 25-plus years with occasional re-sanding. Concrete is cheaper today and more likely to be a demo-and-redo job in 15.
What Patios, Walkways & Pool Decks costs in Los Angeles, CA
Los Angeles pricing for this work lands squarely in the ranges below. These are installed costs, including base prep, materials, and cleanup.
| Scope | Typical installed cost |
|---|---|
| Paver patio (300 – 500 sq ft) | $4,130 – $12,980 |
| Flagstone or travertine patio | $6,500 – $18,000 |
| Stamped concrete patio | $4,000 – $10,500 |
| Paver walkway (50 – 100 linear ft) | $2,200 – $6,800 |
| Pool deck resurfacing (400 – 600 sq ft) | $4,000 – $9,500 |
| New pool deck, pavers or stone | $9,000 – $22,000 |
| Drainage or regrading add-on | $1,200 – $4,500 |
What pushes a job to the high end: square footage, obviously, but also access. A backyard reachable only through a 3-foot side gate on a narrow lot means material gets hand-carried, and that adds labor. Relocating irrigation, a gas line to the grill, or pool equipment plumbing adds $800 to $3,000. A slope that needs a retaining wall or a raised deck adds real money. Removing old concrete runs $1,500 to $4,000 depending on thickness and rebar. And stone always costs more than pavers of the same footprint.
Every estimate we write is line-itemed: demo, base, drainage, materials by brand and sku, labor, disposal, permits if required. The number you see is the number you pay. No change orders mid-project for things that should have been scoped on day one. Ask about 0% financing for 18 months and $1,000 off projects over $10,000 while you’re at it.
See the difference
Before
After
Before
After
Before
AfterWhat Los Angeles yards specifically do to this job
Most of our Los Angeles hardscape work falls into two categories. On the flats (Sherman Oaks, Mid-City, Culver City edges) we’re usually working behind 1920s to 1940s Spanish Colonial and Craftsman bungalows or 1950s-60s stucco tract homes, where the existing concrete is 4 inches thick with no base under it and has already cracked. On the hillsides (Hollywood Hills, the Santa Monica Mountains, parts of the Valley) the yard may sit on a pier-and-grade-beam foundation where the ground itself is engineered, so drainage and grading are the whole ballgame.
Permitting: a flat patio under 30 inches above grade usually doesn’t need a permit in the City of Los Angeles, but a raised deck, a retaining wall over 4 feet, or anything structural does, and we pull it and pass inspection. Two things Los Angeles adds that other cities don’t. First, hillside properties fall under grading and slope rules, and in the WUI fire zones the Santa Ana winds push through, so walkway and deck materials near the house are increasingly chosen for ignition resistance. Second, winter rain on a slope that burned two seasons ago causes debris flows and localized slope failure, which is why we don’t skip the drainage on a hillside patio even when a client asks to. We see it every wet season.
If the project is really part of a bigger backyard scope, homeowners often pair this with ADU Site Prep & Utilities in Los Angeles or a Full Kitchen Remodeling in Los Angeles so the mess and the inspections happen once. If the front yard is included too, it’s part of a full Driveway & Pavers in Los Angeles scope. We also cover nearby cities like Santa Monica, El Segundo, and Marina del Rey through our Los Angeles service area. Learn more about our Driveway & Pavers service overall.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Patios, Walkways & Pool Decks in Los Angeles
A single patio takes 3 to 7 working days; a pool deck plus walkways runs 7 to 12. Weather adds time, and permit review on a raised deck can add 2 to 4 weeks before work even starts. Call (888) 427-1733 for a schedule estimate on your specific yard.
A ground-level patio usually doesn’t, but a raised deck, a retaining wall over 4 feet, or any structural work does, and hillside lots bring grading rules into play. We pull the permits and pass the inspections where they apply, and we’ll tell you at the estimate whether your job crosses that line.
Yes. A resurfacing over an existing sound shell covers 90 percent of what we do on pool decks, and it avoids the cost of relocating plumbing or rebuilding coping. If the shell is cracked or the coping has separated, we’ll flag it before we bid, not after.
Gravel or decomposed granite with steel edging is the least expensive option, usually $5 to $10 per square foot, and it works well for side yards and garden paths. Pavers cost more but survive foot traffic and a hose without re-grading every year.
Every hardscape project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on base, setting, and sealing. Material warranties come from the manufacturer and we hand you the paperwork. Call (888) 427-1733 to schedule your free estimate and see the line items in writing.
Get a written estimate for Patios, Walkways & Pool Decks in Los Angeles
A free on-site estimate takes about 45 minutes. We measure the yard, check slope and drainage, talk through pavers versus stone versus cool-deck, and hand you a line-itemed quote with no surprises. Calls are answered by a live person 24/7 at (888) 427-1733. Technicians are background-checked and arrive in uniform. Schedule it, and we’ll see your Los Angeles yard in person.
Written by the team at Groundwork Construction Co.