Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Marina del Rey: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Marina del Rey typically runs $9,000 – $28,000 for a full wet-area rebuild, with a straight shower replacement landing between $3,000 and $8,500 and a glass-enclosed walk-in install between $4,500 and $12,000. Most jobs take one to three weeks from demo to final seal, depending on permit scope and whether plumbing moves. Call (888) 427-1733 to schedule a free on-site estimate before any of that gets decided.
The Five Stages of a Walk-In Shower Remodel, Start to Finish
A shower remodel is a sequence, and the order matters more than most homeowners expect. Here’s how we run it in Marina del Rey condos and townhomes, and where your decisions land.
- Stage 1: Tear-out and inspection (day 1 – 2). We pull the old pan, tile, and backer, and open the wall enough to read what’s behind it. In marina mid-rises we routinely find original 1970s copper supply lines with pinholes and galvanized drain fittings that have been eaten thin by years of salt fog rolling off the water. You decide then: patch and continue, or replace the valve and drain while the wall is open.
- Stage 2: Framing and rough-in (day 3 – 4). If the layout changes, the drain relocates and the valve body resets. This is also when we add blocking for a bench or grab bars and stub out a niche. You’ll confirm the final drain location and whether you want a linear or center drain before the pan goes in.
- Stage 3: Waterproofing (day 5 – 6). Cement backer board, then a bonded sheet or liquid membrane that turns the whole wet zone into one continuous envelope. This stage is where coastal moisture problems get designed out. Inspections, when triggered, happen after the membrane and before tile.
- Stage 4: Tile and fixtures (day 7 – 11). Pan first, then walls, then grout and seal. You choose the tile and grout color before this window opens because thinner-set doesn’t wait. The valve trim, showerhead, and drain cover install after tile.
- Stage 5: Glass and final walkthrough (day 12 – 15). Templated glass goes in last, because it’s cut to the finished opening. We test the pan, check the slope, and hand over care instructions. You sign off, and the 730-Day Done Right Promise clock starts.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Decide Your Shower
A walk-in shower is a short list of big decisions. Here’s what the real trade-offs look like, in plain terms.
- Tile material. Porcelain and glazed ceramic are the workhorses: durable, salt-tolerant, and cheaper per square foot than natural stone. Marble and travertine look stunning but want sealed twice a year and etch from acidic cleaner – a hard sell in a beach-adjacent unit where condensation lives on the walls.
- Glass. Frameless glass opens the space but costs more and demands precise templating. Semi-frameless runs less and forgives minor wall movement. In older marina buildings, walls are rarely plumb, so frameless only makes sense if the tile-in is squared.
- Drain type. A center drain is the cheapest and easiest retro-fit; a linear drain reads cleaner and lets you use larger, flatter-set tile, but the floor pack-out is deeper and the drain itself costs more.
- Valve and trim. A pressure-balance valve is standard; a thermostatic valve lets you set temperature independently, which matters on cold-morning marine-layer days. Kohler trim holds up well against salt-air humidity on the fixtures themselves.
- Niche, bench, and curb. A curbless entry looks hotel-quality but requires the floor assembly to drop, which is a real structural detail in slab-on-grade units. Benches and niches add tile and waterproofing labor but almost nothing to the daily experience.
What Walk-In Showers & Shower Remodeling Costs in Marina del Rey, CA
Here’s the line-item picture so you can see where the money goes instead of staring at one vague number.
| Scope | Typical Range |
|---|---|
| Shower replacement (same footprint, no layout change) | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Full wet-zone rebuild (tile, glass, valve, waterproofing) | $9,000 – $28,000 |
What pushes a job to the high end: moving the drain and relocating the valve (plumbing + permit + patch), a curbless entry that drops the floor assembly, natural stone instead of porcelain, frameless glass instead of semi-frameless, and hidden conditions like a rotted sill plate or pinhole copper once the wall opens. What keeps it at the low end: same footprint, porcelain tile, semi-frameless glass, and existing plumbing that’s still sound. The number you see in our written estimate is the number you pay – no change orders for things we should have caught at demo.
Every written estimate itemizes demo, framing, waterproofing, tile, glass, fixtures, and permit – so you can compare apples to apples against any other bid. Call (888) 427-1733 for a line-item quote, and remember the standing offers: 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Marina del Rey Homes Do to This Job
Walk-in Showers & Shower Remodeling in Marina del Rey runs into a very specific building stock. Most of the multifamily work here is in 1960s – 1980s mid-rise condos and apartments, plus newer high-rise and townhome infill around Admiralty Way and the Washington Boulevard spine. Those older units carry original plumbing chased into shared walls, so a shower valve swap is a building-wide plumbing question, not a one-unit decision – and in a condo, the HOA’s alteration packet usually needs a plumbing drawing before anyone touches drywall. The salt fog off the marina rolls in nightly, and metal fasteners, valve bodies, and drain straps corrode years faster than they would a few miles inland. The low rainfall sounds forgiving until an atmospheric river drops five inches in a day and finds the one spot where the membrane was thin. We spec corrosion-resistant fasteners, a fully bonded membrane, and a pan slope that sheds water regardless of how the marine layer condenses on the walls. Homeowners here often pair the shower work with a roof catch-up, since the same salt-and-moisture pressure hits the flat and low-slope roofs on these buildings – that’s a conversation for Roof Replacement & Installation in Marina del Rey or Metal Roofing in Marina del Rey if the inspection turns something up.
We cover the full Marina del Rey footprint, ZIP 90292, and this shower scope folds neatly into a wider Bathroom Remodeling in Marina del Rey project when you want the vanity and floor done at the same time. If you’re still scoping the bigger picture, our Bathroom Remodeling service hub lays out how the pieces fit.
Serving Marina del Rey, CA – Our Local Coverage Area
We serve Marina del Rey and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Marina del Rey
Most walk-in shower remodels take one to three weeks, with the typical same-footprint job finishing in about 10 to 14 working days. Adding a curbless entry or moving the drain pushes it toward three weeks because of the curing and inspection windows. Call (888) 427-1733 for a schedule attached to your exact scope.
You need a permit any time plumbing or electrical is relocated – moving a drain, relocating the valve, or adding a heated floor circuit. A straight tile-and-glass swap on the existing plumbing usually doesn’t trigger one, but we pull the permit whenever the scope requires it and walk the inspection. Ask us to confirm your specific scope during the free estimate.
Yes. A same-footprint walk-in shower is the most common job we do – the old pan comes out, the drain stays put, and the new membrane, tile, and glass go in around the existing rough-in. That keeps the job closer to the $4,500 – $12,000 install range instead of the high end of the $9,000 – $28,000 rebuild range.
A walk-in shower installation runs $4,500 – $12,000, and a full wet-zone rebuild runs $9,000 – $28,000. The written estimate is the price you pay if the wall opens to what we expected; if demo reveals a hidden problem, we stop, show you, and price the fix before we proceed. Call (888) 427-1733 to get that number in writing.
The 730-Day Done Right Promise covers our workmanship for two full years – one of the longer residential workmanship guarantees in the space. If something isn’t right, we make it right, and manufacturer warranties on the tile, membrane, valve, and glass ride on top. Calls are answered by a live person 24/7, so a question in year two gets a human on the phone.
Get a Free Walk-In Showers & Shower Remodeling Estimate in Marina del Rey
Call (888) 427-1733 and we’ll schedule a free on-site estimate for Walk-In Showers & Shower Remodeling in Marina del Rey. The visit lasts about 45 minutes: we measure the footprint, check the plumbing behind the wall, listen to what you want, and email a line-item written quote with a fixed price, permit scope, and schedule. No pressure, no hidden fees. Background-checked, uniformed technicians on every visit. Estimates are free, and the standing offers apply.
Written by the team at Groundwork Construction Co.