Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in Marina del Rey, CA: What It Costs and How Long It Takes
Window installation in Marina del Rey typically runs $4,500 to $15,000 for a full-home replacement, or $8,000 to $25,000 if you’re going with impact-rated units, and most jobs run two to four days from demo to finish. The number that moves most is not the window itself but what the salt air has done to the frames and fasteners around it. Call (888) 427-1733 and we’ll walk you through it before anyone touches a sill.
Here’s the pattern we see over and over in Marina del Rey: a 1970s condo along Admiralty Way or a mid-rise off Washington Boulevard has original aluminum-slider windows, and when the crew pulls the first one, the fasteners underneath are already rust-stained and the rough opening has soft spots. That’s not a surprise to anyone who lives here. It just means the job is window installation plus a small repair, and the estimate needs to reflect both from day one.
How We Run a Window Installation Job, Start to Finish
Window installation is a sequenced job, and the order matters more than most homeowners expect. Here’s how it actually goes.
Stage 1: Measure and spec (day 0, about 60 to 90 minutes)
We measure every opening, check the frame condition, and confirm whether the existing units are retrofit-style (fit into the current frame) or full-frame (frame and all comes out). At this stage you decide the material and glass package. This is the decision that determines your final price, so we don’t rush it.
Stage 2: Order and permit (weeks 1 to 4, homeowner decides nothing here)
Manufactured windows for most Marina del Rey jobs take two to four weeks to arrive. If your building requires a permit or HOA architectural approval, that runs in parallel. We handle the paperwork and pull the permits; you sign and get copied on the approval.
Stage 3: Protect and demo (day 1, half to full day)
We cover floors and furniture, then pull the old units. This is the noisy, dusty part. It’s also where the coastal repair work shows up, and we photograph anything unexpected so you see it before we fix it.
Stage 4: Flash, set, and seal (days 2 to 3)
New windows get flashed, set, shimmed, and sealed with a marine-grade sealant rated for coastal exposure. This is the stage salt air punishes fastest, so the flashing and sealant spec is not where we cut corners.
Stage 5: Trim, test, and walkthrough (day 3 or 4)
Interior trim goes back on, every unit is opened and latched a few times, and we walk the job with you. Most Marina del Rey window installations finish in a single continuous block once materials land.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Window installation is mostly a materials decision. Here’s what moves the price and how each option holds up.
- Vinyl frames: the budget end, solid thermal performance, and they don’t corrode in salt air. The trade-off is color and profile limits, so they suit condo and apartment replacements more than custom work.
- Aluminum frames: common in the marina’s mid-rise stock and slim-profile, but standard aluminum corrodes and needs a proper finish and stainless hardware to survive here.
- Fiberglass and wood-clad: the durable middle and upper range, dimensionally stable in damp marine air, and the choice when you want a real wood interior. Expect these to cost more than vinyl.
- Glass packages: low-E coatings and argon fill cut heat gain and condensation. In a marine-layer climate they’re worth it on cold walls; on a shaded north-facing unit you can sometimes skip it.
- Impact-rated units: heavier, engineered glass, the top of the range and often required in coastal builds. These overlap with our Windows & Doors in Marina del Rey work, which is where the full scope lives.
Brand matters less than the finish and hardware spec. Where manufacturers like Andersen and Marvin line up with a coastal application, we’ll tell you; where they don’t, we’ll say so.
What Window Installation Costs in Marina del Rey, CA
Two numbers cover most of what we quote: $4,500 to $15,000 for a standard full-home window replacement, and $8,000 to $25,000 for impact-rated window installation. A single-window swap sits well below both. Here’s what pushes a Marina del Rey job toward either end:
- Number and size of openings: the obvious one. Every window is a line item.
- Existing condition: corroded frames, soft rough openings, or rot behind the flashing adds repair scope. This is the single biggest wildcard on the marina.
- Retrofit vs. full-frame: full-frame means frame, trim, and sometimes stucco repair around the opening.
- Material grade: vinyl vs. fiberglass vs. wood-clad vs. impact glass, roughly in that order.
- Permit and HOA scope: multifamily buildings with architectural review add time and paperwork, and sometimes a matched-spec requirement.
A written estimate from us is line-itemed, so you see what’s included and what isn’t. What’s typically excluded: structural repairs if we find rot after demo, and stucco patching beyond the immediate opening. We price those as a separate, approved line, not a surprise. Upfront pricing here means the number you see is the number you pay once the scope is agreed. Call (888) 427-1733 for an exact quote, estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Marina del Rey Homes Specifically Do to This Job
Buildable land is scarce in Marina del Rey, so almost nobody here is doing a ground-up single-family build. The work is dense multifamily and condo renovation across the 1960s to 1980s mid-rises, plus contemporary infill townhomes and the surviving beach-era bungalows tucked off Washington Boulevard. Those older envelopes are where window installation gets interesting. The marine layer rolls off the water every night and drags salt-laden air with it, and exterior fasteners here last roughly half as long as they do inland. Pull a window screw out of a 1970s Admiralty Way unit and you’ll often find it rust-stained before you’ve fully backed it out.
Two consequences for this job. First, condensation on cold-framed walls in uninsulated older buildings is common, so the glass spec and the sealing detail matter more here than they would a few miles inland. Second, the flat roofs and wide low eaves that dominate the marina’s contemporary architecture trap moisture where an inland house wouldn’t, and wind-driven rain from the west and south finds any gap in the flashing. We spec marine-grade sealant and corrosion-resistant fasteners on every Marina del Rey window installation for that reason. We cover the whole of Marina del Rey, including the 90292 ZIP. The same salt exposure that eats window hardware also takes a toll on exterior fencing, which is why a number of our window customers pair this project with a Wood Fence in Marina del Rey or a Chain Link Fence in Marina del Rey while we’re already on site.
Permits and HOA review are routine in this multifamily stock, and we pull permits and pass inspections as part of the job. If windows are one piece of a larger scope, it’s worth looking at our Windows & Doors service to see how the trades fit together. Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
Serving Marina del Rey, CA – Our Local Coverage Area
We serve Marina del Rey and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Window Installation in Marina del Rey
Most jobs run two to four days on site, plus two to four weeks of lead time for manufactured windows to arrive. The install itself is fast; the wait is the order. Call (888) 427-1733 and we’ll give you a realistic timeline for your building.
Often yes, especially in multifamily and condo buildings, and some homeowners’ associations also require architectural approval before work starts. We check the requirement for your specific building and pull the permits for you. Call (888) 427-1733 to confirm your situation.
Standard full-home replacement runs $4,500 to $15,000, and impact-rated units run $8,000 to $25,000, with single-window swaps below that range. Corroded frames or rot behind the flashing can add repair cost. Call (888) 427-1733 for an exact quote, estimates are free.
No, not for the agreed scope. If demo uncovers hidden damage, we photograph it, quote it as a separate line, and get your approval before anyone touches it. Upfront pricing means no change orders on the job we scoped.
Our workmanship is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Manufacturer warranties on the windows themselves vary by brand. Call (888) 427-1733 and we’ll walk through both in writing.
Get a Free Window Installation Estimate in Marina del Rey
Call (888) 427-1733 for a free on-site estimate on your window installation in Marina del Rey. We’ll measure your openings, check the frames for salt and moisture damage, and hand you a line-itemed written quote with a realistic timeline. Calls are answered by a live person around the clock, and our background-checked, uniformed technicians do the work. From foundation to finish line, built to last, backed in writing.
Written by the team at Groundwork Construction Co.