Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Santa Monica, CA: What It Costs and How the Job Runs
A metal roof on a Santa Monica house typically runs $15,000 to $40,000, and most homes take three to seven days from tear-off to final inspection. The number swings on roof size, how many layers get stripped, panel type, and whether your property sits inside the coastal permit overlay. Call (888) 427-1733 for a free on-site estimate with a written, line-item quote.
How a Metal Roofing Job Actually Runs, Stage by Stage
Metal roofing isn’t a one-day swap. Here’s the real sequence, and where you’ll be asked to make a decision.
- Day 1 – tear-off and deck inspection. We strip the existing shingles or tile and check the sheathing underneath. On mid-century Santa Monica homes, that’s where we find the soft spots and old water damage that nobody saw from the ground. You approve any decking replacement before we go further, so there are no surprise line items later.
- Day 1-2 – underlayment and flashing. A high-temp synthetic underlayment goes down, then new flashing at every penetration, valley, and edge. Salt air off the bay eats cheap flashing fast, so this stage is where a metal roof earns its lifespan. Expect a full day or more just on this.
- Day 2-4 – panel installation. Standing seam panels are rolled and set in long runs; screw-down panels go on in overlapping sheets. This is the stage you pick your panel profile and color before we order, roughly two to three weeks ahead of install day.
- Day 4-6 – trim, ridge, and vents. Ridge caps, gable trim, and vented closures go on to seal the roof against wind uplift. Coastal wind loads matter here, and this is where a sloppy crew shows.
- Final day – inspection and cleanup. We walk the roof with the city inspector and magnet-sweep the yard for fasteners. You get a final walkthrough and your 730-Day Done Right Promise in writing.
Most jobs complete in a single visit per stage, and you’ll know the full schedule before we start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Metal Roofing Options You’ll Choose Between
Metal isn’t one product. Here’s what Santa Monica homeowners actually pick from, and the honest trade-off of each.
- Standing seam steel: Concealed fasteners, the cleanest look, and the best wind and salt-air performance. Costs more up front and takes longer to install. Suits the luxury remodels in the 90402 flats and anyone planning to stay put.
- Screw-down corrugated panels: Lower cost, faster install, exposed fasteners that need periodic checking. A solid fit for tighter budgets and simpler roof shapes.
- Aluminum panels: The best corrosion resistance in salt air, since aluminum doesn’t rust. Pricier than steel, and worth it within a few blocks of the beach.
- Color and finish: Kynar-based finishes hold color under UV far longer than basic painted steel. Pick your color before the order goes in – changes after that reset the timeline.
- Panel profile and gauge: Thicker gauge handles wind uplift better but adds weight and cost. We match gauge to your roof pitch and exposure.
The right choice comes down to how close you are to the water, how long you plan to own, and your budget. We’ll show you the trade-offs in person rather than pushing one product.
What Metal Roofing Costs in Santa Monica, CA
Metal roof installation in Santa Monica runs $15,000 to $40,000, and here’s what pushes a job toward either end of that range.
- Roof size and complexity: A simple gable on a bungalow sits near the low end; a cut-up roof with dormers and multiple valleys climbs toward $40,000.
- Existing roof condition: Multiple old layers, rotten decking, or failed flashing add tear-off and repair time.
- Panel type and gauge: Standing seam and aluminum run higher than screw-down steel.
- Coastal permit overlay: Properties inside the coastal zone can require extra review before the permit issues, which adds time and cost.
- Structural work: Older Santa Monica roofs sometimes need rafter or sheathing repair uncovered during tear-off.
Your written estimate itemizes panels, underlayment, flashing, labor, permits, and disposal. What isn’t included: structural repairs found after tear-off, which we price and get your approval on before doing the work. No change orders you didn’t agree to. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Monica Homes Specifically Do to This Job
Santa Monica’s building stock is mostly mid-century low-rise stucco: 1920s-40s Spanish and Craftsman bungalows south of Wilshire and in Ocean Park, and larger luxury homes up in the 90402 flats north of Montana. Older roofs here carry decades of patchwork, so tear-off often reveals decking that needs replacement before panels go down. Near the bay, the marine layer and salt air corrode fasteners and flashing faster than inland, which is why we spec corrosion-rated fasteners and aluminum or coated steel on properties close to the water. And anything inside the coastal overlay can need Coastal Commission sign-off before the permit pulls – a real scheduling factor on beach-adjacent blocks that inland roofers don’t deal with. If the wider project includes more than the roof, this is part of a full Roofing in Santa Monica scope we’re glad to plan with you, and many homeowners pair a new roof with Impact Windows & Doors in Santa Monica to lock in the whole envelope at once. We cover all of Santa Monica, including the 90402, 90404, 90401, and 90406 ZIPs.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Santa Monica
Most metal roofing projects in Santa Monica take three to seven days of on-site work, plus two to three weeks of lead time to order panels and pull the permit. Call (888) 427-1733 for a schedule that fits your home.
Yes – a re-roof permit is required, and properties inside the coastal overlay may need additional review before it issues. We pull the permits and pass the inspections for you. Call (888) 427-1733 to talk through your property.
In most cases, yes – metal roofing is an exterior job, so plumbing and interior finishes stay untouched. If tear-off reveals damaged decking, we’ll flag it and get your approval before any structural repair. Call for a free assessment.
Metal roof installation in Santa Monica runs $15,000 to $40,000 depending on size, panel type, and existing roof condition. Call (888) 427-1733 for an exact, line-item quote – estimates are free.
Every metal roofing project is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. You also get the manufacturer’s material warranty on the panels and finish. Call (888) 427-1733 to review the details.
Get a Free Metal Roofing Estimate in Santa Monica
Call (888) 427-1733 to schedule a free on-site estimate for metal roofing in Santa Monica. We’ll measure the roof, review panel and finish options, check whether your property sits in the coastal overlay, and hand you a written line-item quote – the number you see is the number you pay. A live person answers around the clock. You can also ask about 0% financing for 18 months and $1,000 off projects over $10,000. Our technicians have up to 12 years of experience, and our roofing work is backed in writing.
Written by the team at Groundwork Construction Co.