Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sliding & Patio Doors in Santa Monica, CA: What the Job Actually Involves
Most sliding and patio door replacements in Santa Monica run $3,200 to $11,500 for the door itself, and a typical installation takes one to two days on site – longer if the opening needs structural work or sits inside the coastal permit overlay. The number that surprises people is rarely the door; it’s what the wall behind it needs. Call (888) 427-1733 for a free on-site estimate, and we’ll tell you which category your opening falls into before you commit to anything.
How We Install and Repair Sliding & Patio Doors, Stage by Stage
Sliding and patio door work looks simple from the outside. It isn’t, especially in older Santa Monica homes where the original opening was framed for a wood slider that’s been settling since the Johnson administration. Here’s the actual sequence.
Stage 1 – Site visit and measurements (45 to 90 minutes). We measure the rough opening, check the header for sag, test the threshold for slope, and look at what’s under the stucco. You decide the configuration here: slider or French, two-panel or three, which direction it stacks. This is also when we confirm whether the opening is in the coastal zone, because that changes the permit path.
Stage 2 – Ordering and permit filing (3 to 6 weeks). Custom sizes in Andersen or Marvin run longer than stock. Standard sizes ship faster. Meanwhile we file for the building permit if the scope is structural or if the door is a like-for-like replacement that the city wants documented. You approve the final spec sheet and finish color before anything is ordered.
Stage 3 – Demo and prep (half a day). Old door comes out, the opening gets stripped to framing, and we inspect for rot, water damage, or gaps in the flashing. This is where surprises live. A door that’s leaked quietly for a decade often has soft framing at the sill. We photograph everything and show you before we proceed.
Stage 4 – Installation and flashing (one day). New door set, shimmed, leveled, and flashed properly. In Santa Monica, the flashing detail matters more than the door brand – salt air off the bay attacks fasteners and steel faster than inland, so we spec corrosion-rated hardware and seal the sill pan correctly. You decide the handle and locking hardware at this stage if you haven’t already.
Stage 5 – Inspection and finish (one to two days). City inspection if the permit requires it, then interior trim, exterior stucco patch, and paint. We walk the door with you, demonstrate the lock and the screen, and leave the warranty paperwork in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The spec conversation is where most of the money and most of the regret live. Here’s what actually matters for a Santa Monica patio door.
- Vinyl sliders: The value play. $3,200 to $5,500 installed. Good thermal performance, low maintenance, but the frames are chunky and the color palette is limited. Fine for a rental unit or a back-of-house opening; a compromise on a 90402 façade.
- Fiberglass: $4,500 to $7,500. Looks like wood, holds up to salt air better than steel, and won’t rot. This is the sweet spot for most coastal homes.
- Wood-clad (Andersen, Marvin): $7,000 to $11,500. Real wood inside, aluminum or vinyl outside. This is what luxury remodels in the flats specify, and it’s the right call if the door is visible from the living room.
- Multi-slide and pocketing systems: $12,000 and up. Panels that stack or disappear into the wall. Great for indoor-outdoor living, but they need a structural header and a wider opening, which means engineering and a longer permit.
- Glass spec: Tempered is required near the floor. Low-E and laminated glass cost more but cut heat gain and hold up to coastal UV. You’ll decide this at ordering.
What Sliding & Patio Doors Cost in Santa Monica, CA
Plan on $3,200 to $11,500 for a single sliding or patio door installed, with custom multi-slide systems running higher. Here’s a line-item view of the typical range.
| Item | Range |
|---|---|
| Standard vinyl slider, installed | $3,200 – $5,500 |
| Fiberglass slider, installed | $4,500 – $7,500 |
| Wood-clad slider or French door, installed | $7,000 – $11,500 |
| Multi-slide or pocketing system, installed | $12,000+ |
| Structural header / opening modification | $2,500 – $8,000 |
| Rot repair at sill and framing | $600 – $3,000 |
| Permit and inspection fees | $400 – $1,800 |
Five things push a job toward the high end: the size of the opening, whether the framing is sound, whether you’re widening the wall (structural), the material grade you choose, and whether the permit scope pulls in coastal review. A like-for-like swap in a sound wall is the low end. A widened opening in a 1930s Spanish bungalow with rot at the sill and a coastal permit is the high end.
Our estimates are written line-item, and the number you see is the number you pay. No change orders midway through unless you ask for scope we didn’t quote.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Monica Homes Specifically Do to This Job
The housing stock here writes its own rules. South of Wilshire and through Ocean Park, you’re working in 1920s to 1940s Spanish and Craftsman bungalows where the original door openings were framed for wood and have been settling for nearly a century. North of Montana in 90402, we’re often matching custom finishes on large luxury remodels where the patio door is a design feature, not just an exit. Along Lincoln and Pico, the 1960s and ’70s wood-frame soft-story apartment buildings present a different problem entirely: tuck-under parking, older sliders, and water intrusion that’s been quietly rotting framing for years.
Two local factors change the job more than anything else. First, the marine layer and salt air off Santa Monica Bay corrode flashing, fasteners, and exterior steel faster than inland – we spec accordingly and seal sills correctly the first time. Second, anything within the coastal overlay can require Coastal Commission sign-off just to pull the permit, and the city’s plan-check is slow even on straightforward work. We account for that timeline up front so you’re not guessing.
If your patio door is part of a larger exterior scope, it usually makes sense to plan it alongside our Windows & Doors in Santa Monica work, and homeowners often pair a new patio door with Fence Repair in Santa Monica or a fresh Paver Driveways in Santa Monica pour while the yard is already torn up. We cover all of Santa Monica, including 90404 and 90401, and our broader Windows & Doors service covers the rest of the exterior envelope.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Sliding & Patio Doors in Santa Monica
One to two days on site for a standard replacement, with three to six weeks of lead time beforehand for ordering and permitting. Custom multi-slide systems and coastal-zone projects run longer. Call (888) 427-1733 and we’ll give you a realistic date range for your specific opening.
Yes, in most cases – like-for-like replacements are often documented, and any change to the opening size or structure requires a building permit and inspection. Projects near the beach may also fall under Coastal Commission jurisdiction. We handle the filing and the inspection, and we tell you up front what your scope requires.
Yes, if the new door fits the existing rough opening and the framing is sound. Widening the opening or switching to a multi-slide system means a structural header and engineering, which adds cost and time. We’ll tell you which category your opening falls into during the free estimate.
Typically $3,200 to $11,500 installed, depending on size, material, and whether the framing needs repair. Structural work and coastal permits push the number higher. Call (888) 427-1733 for an exact written quote – estimates are free.
Every project we complete is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. Manufacturer warranties on Andersen and Marvin products run alongside that. Full paperwork is left in writing when we finish.
Get a Free Sliding & Patio Doors Estimate in Santa Monica
Call (888) 427-1733 to schedule a free on-site estimate for your sliding and patio door project. A live person answers around the clock, so there’s no voicemail and no waiting until Monday. We’ll measure the opening, walk you through your material options, and hand you a written line-item quote with no surprises. Background-checked, uniformed technicians on every job.
Written by the team at Groundwork Construction Co.