Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in Santa Monica, CA: What the Job Actually Involves
Impact windows and doors in Santa Monica typically run $8,000 – $25,000 for a whole-house package, and most single-family installs take two to four working days once the units are on site. You’re replacing glass and frames with laminated, impact-rated assemblies that meet California’s coastal windborne-debris and seismic-safety demands, and you’re usually doing it because the originals are single-pane, fogged, or rattling in their openings. Call (888) 427-1733 and we’ll price it in person, with a written line-item quote.
How We Run an Impact Window and Door Install, Start to Finish
This isn’t a weekend swap. Here’s the real sequence for a typical Santa Monica house, and where you make decisions.
Stage 1: Measure and product selection (day 1, about 90 minutes)
We measure every rough opening, note the wall depth and stucco condition, and check whether the existing frames are wood, aluminum or vinyl. This is where you pick glazing, frame material, and whether doors swing or slide. You’ll also decide here whether we pull a permit or you do; we recommend letting us handle it.
Stage 2: Permit filing and plan check (2 – 6 weeks depending on scope)
Replacement windows in a like-for-like opening are a fairly quick over-the-counter approval in most cases. Changing sizes, adding openings, or touching anything in the coastal overlay adds review time. You sign off on the submitted plans before we file, and we track the correction cycles for you.
Stage 3: Fabrication (3 – 8 weeks)
Impact units are made to order. Andersen and Marvin impact lines are the two we specify most often for Santa Monica homes, and lead times stretch when you pick custom colors or oversized sliders. You’ll confirm final dimensions again at the factory-drawing stage; catching a millimeter error here saves a month later.
Stage 4: Demo, install, and flash (1 – 3 days per elevation)
We pull the old units, inspect for rot or termite damage behind the frame, repair any soft framing, set the new units plumb and level, and flash the perimeter with corrosion-rated materials. Salt air eats cheap fasteners, so the flashing and sealant spec matters more here than it does inland. Most homes are weather-tight by the end of each working day.
Stage 5: Inspection and finish-out (1 – 5 days)
The city inspector signs off on the installation. Then we patch stucco, caulk, and paint the returns so the openings look original to the wall. You walk the job with us, we document every unit, and the 730-Day Done Right Promise covers the workmanship.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Impact glass isn’t one product. What you pick changes both the price and how the house feels to live in.
- Frame material. Vinyl is the budget pick and holds up fine in most Santa Monica applications, but it can’t be refinished. Aluminum is slimmer and suits mid-century homes, though it conducts heat. Wood-clad (Andersen, Marvin) gives the best look on a Spanish or Craftsman house and costs the most.
- Glazing type. Laminated impact glass with a low-E coating is the standard. You can add a laminated inner pane for extra security or a tinted version for west-facing rooms that bake in the afternoon sun.
- Configuration. Fixed picture windows are cheapest per square foot. Casement and awning units cost more but seal tighter. Sliding patio doors are the most expensive single opening you’ll buy.
- Door style. An impact-rated entry door, French door or sliding glass patio door should match the window system so the whole envelope performs the same way. Homeowners often pair this with Aluminum Fence in Santa Monica when they’re reworking the front elevation at the same time.
- Finish. Standard white or bronze finishes ship fastest. Custom colors add four to eight weeks and a few hundred dollars per unit.
What Impact Windows & Doors Cost in Santa Monica, CA
A whole-house package in Santa Monica lands between $8,000 and $25,000, with the $8,000 end being a small bungalow with a handful of standard openings and the $25,000 end being a full two-story with sliders and patio doors. Here’s what’s in a typical written estimate:
- Units and glazing: $500 – $1,200 per window depending on size and spec
- Impact-rated entry or patio door: $1,200 – $3,500
- Demo and disposal: $300 – $800
- Permit and plan check: $400 – $1,200 depending on scope
- Stucco patch, caulk, and paint: $600 – $1,800
What pushes the number to the high end: oversized or custom-dimension openings, second-story access, rot or termite damage found behind the frame, a change from window to door (which means structure), and the coastal-overlay review that applies to homes near the bluff or beach. What’s usually not in the estimate: interior trim upgrades you request after the fact, structural header work if the opening isn’t a true like-for-like, and major stucco repairs beyond patching. Upfront pricing means the number you see is the number you pay on the work we scoped. Call (888) 427-1733 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Monica Homes Specifically Do to This Job
Santa Monica’s housing stock is the reason these installs run longer than a homeowner expects. South of Wilshire and through Ocean Park, you’re working on 1920s – 40s Spanish and Craftsman bungalows where the rough openings were never square and the stucco hides decades of patchwork. In the 90402 flats north of Montana, large luxury remodels mean bigger openings and more custom units. The marine layer and salt air off Santa Monica Bay take a toll on flashing, fasteners, and exterior steel faster than anywhere inland, so we spec corrosion-rated materials every time. And the June Gloom-to-dry-summer cycle keeps cracking stucco around every opening we cut. Anything near the bluff falls under Coastal Commission jurisdiction, which adds review time and sometimes a design condition you’ll want to understand before the permit gets pulled. Our team works across Santa Monica and the surrounding ZIPs 90404, 90401, 90406 and 90407.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Impact Windows & Doors in Santa Monica
Plan on two to four working days on site for a typical house, plus three to eight weeks for fabrication and two to six weeks for permit approval before the crew arrives. Custom colors and oversized sliders add time on the fabrication side. Call (888) 427-1733 and we’ll give you a real calendar based on your scope.
Yes, replacement windows and doors require a permit in Santa Monica, and anything in the coastal overlay may need additional review. We file the permit, manage the plan-check corrections, and meet the inspector on site. Call (888) 427-1733 to start the conversation.
In a true like-for-like replacement, yes: the new unit drops into the existing rough opening and no framing changes are needed. The moment you change the size of an opening, convert a window to a door, or remove a wall between rooms, a structural header is required and the job shifts into a different scope. We’ll tell you which category your project is in before you commit.
Coastal exposure drives the premium. Salt air and the marine layer shorten the life of standard flashing, fasteners, and steel, so we upgrade the corrosion spec on every install. Homes near the beach also carry Coastal Commission review, which adds permitting time and sometimes design requirements. The materials themselves are not more expensive; the installation spec and the review are.
Our 730-Day Done Right Promise covers the installation for two full years: if it’s not done right, we make it right. The unit manufacturer warranty covers the glass and frame separately and is typically longer, and we hand you the paperwork at the final walkthrough.
Get a Free Estimate for Impact Windows & Doors in Santa Monica
Call (888) 427-1733 and a live person answers, day or night. We’ll schedule a free on-site estimate, measure every opening, talk through the glazing and frame choices, and hand you a written line-item quote with no surprises. We also handle 0% financing for 18 months and $1,000 off projects over $10,000. From foundation to finish line, this is one job you don’t want to gamble on.
Written by the team at Groundwork Construction Co. of Los Angeles.