Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Santa Monica: What It Takes and What It Costs
Paver driveways in Santa Monica typically run $7,000 – $18,000 installed, and most jobs finish in 4 – 7 working days once material is on site. The work is excavating the old surface, building a compacted base, setting edge restraint, laying pavers, cutting borders, and sand-setting the joints. The base is the part that decides whether the driveway lasts 20 years or six. Call (888) 427-1733 and we’ll walk your driveway and quote it in person.
How We Build a Paver Driveway, Stage by Stage
Paver work is mostly hidden. The pavers you see are the last third of the job. Everything before them is what keeps them flat, tight, and draining toward the street instead of toward your garage.
Stage 1: Demo and haul-off (1 – 2 days)
We remove the existing concrete, asphalt, or old pavers down to grade and haul it out. At this point you decide the finished driveway depth and whether the apron at the sidewalk gets rebuilt. Anything under the slab that surprises us, like a forgotten root or a failing old drain line, gets flagged the same day. For a driveway that’s part of a full Driveway & Pavers in Santa Monica scope with a new walkway or courtyard, this is where we sequence the trades.
Stage 2: Grading and base (2 – 3 days)
We excavate to a solid base depth, then place and compact base rock in lifts. Each lift gets mechanically compacted before the next goes down. You’ll see the laser level and plate compactor working for a while; that’s a good sign, not a delay. Your decision here is the slope: slightly away from the garage, toward the street, never puddling at the apron.
Stage 3: Edging and restraint (half a day)
Paver driveways fail at the edges first. We set a proper edge restraint, pinned or glued, so the field can’t walk outward under car weight. On a Santa Monica driveway with a tight side setback, the restraint also protects the neighbor’s property line.
Stage 4: Laying and cutting (2 days)
Pavers go in a running bond or herringbone pattern, with a soldier course around the perimeter. Cuts happen at the edges and around the apron. This is when you see the driveway take shape, and when a color or pattern decision becomes real. If the job is single-visit for small repairs, we skip stages; full installs don’t.
Stage 5: Joint sand, cleanup, walkthrough (1 day)
We sweep polymer joint sand in, vibrate it into the joints, and water it to set. Then you get a walkthrough of the finished surface, a care sheet, and the 730-Day Done Right Promise in writing. The driveway is drivable the same day, laid to spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the choices that move the number happen in the first conversation, not on day three.
- Concrete paver vs. clay brick. Concrete pavers run less per square foot and hold color well; clay brick costs more and looks better with the 1920s – 40s Spanish bungalows south of Wilshire. Both handle marine air well when installed over proper base.
- Herringbone vs. running bond. Herringbone locks tighter under tire load and suits a driveway better. Running bond is cheaper to install and looks cleaner on a long, narrow approach.
- Single color vs. blended field. One color is clean and lower cost. A three-color blend hides tire marks and streaking better on a driveway that sees daily in-and-out traffic.
- Tumbled vs. straight edge. Tumbled pavers give an older, softer look; straight-edge cuts read sharper against stucco and suit the modern remodels in the flats. Cutting allowances run higher on straight-edge.
- Permeable vs. standard. Permeable pavers with open joints and a stone reservoir reduce runoff, which matters on a sloped Santa Monica lot. They cost more up front and need informed maintenance.
We use established paver lines like Belgard for field and border, and we’ll show you the actual pallets before you commit, not a glossy sample board. If the driveway is really the front of a larger project, our Driveway & Pavers service covers the full menu; this page stays on the driveway itself.
What Paver Driveways Costs in Santa Monica, CA
A standard two-car paver driveway in Santa Monica lands between $7,000 and $18,000. Here’s what pushes a job toward one end or the other.
| Line item | Typical range |
|---|---|
| Paver material | $3 – $8 per sq ft |
| Base prep and compaction | $800 – $2,500 |
| Demo and haul-off | $600 – $2,000 |
| Edge restraint and cuts | $500 – $1,500 |
| Total installed (two-car) | $7,000 – $18,000 |
What moves the price:
- Square footage. A one-car apron at 200 sq ft is a much smaller job than a 600 sq ft driveway with a turn-around.
- What’s under it. A worn concrete slab comes out cheaper than a drive with root heave, settled clay, or a hidden old drain that needs rerouting.
- Access. Tight side yards, shared driveways, and narrow alleys cost more in labor and time.
- Paver grade and pattern. Herringbone, blends, and straight-edge cuts raise material and labor; standard running bond sits at the low end.
- Permit scope. Some driveways need a city permit for changes to curb cuts or driveway approaches; that adds cost and time, not just paperwork.
Every written estimate we hand you is line-itemed and fixed. The number you see is the number you pay; no change orders mid-job. And financing at 0% for 18 months plus $1,000 off projects over $10,000 is available. Call (888) 427-1733 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Santa Monica Homes Specifically Do to This Job
Santa Monica isn’t a copy-and-paste paving market. The houses are old, and the geology and ocean cooperate to make it harder. South of Wilshire and in Ocean Park, we work on 1920s – 40s Spanish and Craftsman bungalows where the original driveway apron is often still the poured concrete from the same era, cracked and tilted. Replacing those pavers means handling the slope and the sidewalk transition with the city. In the 90402 flats north of Montana, the driveways are longer, the expectations higher, and the client wants a herringbone field that reads premium from the street.
Salt air and marine layer are real. Fasteners, edge restraint, and any steel in the subgrade degrade faster near the beach than five miles inland, so we spec restraint and joint sand accordingly and overbuild the base rather than trim it. Winter rain events test poorly drained driveways, and a base that was never compacted right will puddle right at the garage door. The city’s permitting is slow, and if the driveway work touches the coastal overlay, expect Coastal Act review on top of plan check. On the east side and along Lincoln and Pico, we regularly see soft-story buildings and older drive aprons; homeowners often pair this with Garage Conversion ADU in Santa Monica work that touches the same driveway approach. When a fresh driveway is part of a bigger rear-yard plan, our ADU Design & Permitting in Santa Monica team handles the permit side.
We cover the whole city, from the 90402 flats to 90404 and 90401, and the surrounding corridor down to Marina del Rey and Culver City. Read more about our work under Santa Monica.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Santa Monica
Most installs finish in 4 – 7 working days for a two-car driveway, from demo through joint sand. Permit approvals for curb-cut or driveway-approach changes can add 2 – 6 weeks before work starts, and coastal-overlay projects run longer. Call (888) 427-1733 for a firm timeline after we walk the site.
A straight paver replacement over an existing driveway usually doesn’t need a building permit. Changing the driveway approach, curb cut, or slope toward the street typically triggers one, and anything in the coastal overlay triggers extra review. We handle the paperwork and pull the permits where required.
Yes, in the vast majority of cases. The driveway sits over the base and doesn’t touch plumbing or structure. The exception is an old drain, gas line, or footing that’s already in the work area. If we uncover one during demo, we flag it the same day and quote any change in writing before touching it.
Expect $7,000 – $18,000 for an installed two-car paver driveway, with the range driven mostly by square footage, base condition, and paver choice. Call (888) 427-1733 for an exact quote; estimates are free.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing on your estimate. Call (888) 427-1733 and we’ll go through exactly what’s covered.
Get a Free Paver Driveway Estimate in Santa Monica
Call (888) 427-1733 to schedule a free on-site estimate for your paver driveway in Santa Monica. We’ll walk the drive with you, measure the space, check the base and slope, and hand you a line-itemed written quote with the 730-Day Done Right Promise attached. We can answer financing questions and both standing offers on the call. Calls are answered by a live person, day or night.
Written by the team at Groundwork Construction Co.