Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Calabasas: What It Involves and What It Costs
A tub-to-shower conversion in Calabasas typically runs $3,500 – $10,000 and takes 5 – 10 working days from demo to final inspection. We remove the old tub and surround, rework the drain and waterproofing, and set a new shower in the same footprint so you don’t have to reconfigure the room. Call (888) 427-1733 and we’ll walk the bathroom with you and quote the exact scope before anyone lifts a tool.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
A conversion isn’t a remodel in miniature. It’s a focused drain-and-waterproofing job with a tight sequence, and the order matters more than the fixtures you pick. Here’s how the stages land on a real Calabasas schedule.
- Stage 1: Site check and measure (day 1, about 2 hours). We confirm the drain location, the valve wall, and what’s behind the surround. This is where you decide shower size (a standard 30×60 or 36×60 alcove typically fits the tub opening; a wider bench or curbless entry changes the framing). Your decision here sets everything downstream.
- Stage 2: Demo and rough-in (days 1 – 2). Out comes the tub, surround, and any failing backer. We inspect the subfloor and joists and move the drain if the new shower needs it. If the valve needs replacing, that happens now, not after tile. Expect demo dust; we seal the doorway.
- Stage 3: Waterproofing and inspection (days 3 – 4). Cement backer or a bonded waterproof membrane goes in, then a flood test on the pan. In Calabasas, the pan and drain connection is the part an inspector looks hardest at, so we schedule it before tile. You’ll see the test, not just hear about it.
- Stage 4: Tile and finishes (days 4 – 7). Wall tile, floor tile, grout, then the glass and trim. This is your big decision window: tile format, grout color, and whether you want a framed or frameless glass panel. Larger tile lays faster and shows fewer grout lines; smaller mosaic on the floor gives better grip.
- Stage 5: Fixtures and punch (days 8 – 10). Showerhead, valve trim, grab bars if you want them, and sealant. Then a walk-through: we run the shower, check for pitch and ponding, and hand you the warranty in writing.
Weather doesn’t slow an interior conversion the way it slows a roof, so the schedule holds. What can stretch it is hidden rot or a drain that needs re-plumbing once the tub comes out. We tell you the same day we find it, with a written change order, before we proceed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Tub-to-Shower Conversion
Most of the decisions here are trade-offs between budget, durability, and how much the room has to look like a showpiece. Here’s what actually moves the needle.
- Shower pan type. A prefab pan is faster and cheaper and comes in standard sizes. A tiled pan with a linear drain looks custom and drains better in a curbless layout, but it costs more and demands precise slope work. For aging-in-place, curbless wins; for a fast flip or rental, prefab is the practical call.
- Wall surface. Large-format porcelain reads clean and modern and cleans up easily. Natural stone, like a marble-look, is beautiful but needs sealing and shows water spotting from Calabasas’s hard water. Acrylic surrounds are the low-maintenance choice and hold up in a busy household.
- Glass. A frameless panel opens the room visually and suits a smaller bath. A framed slider is sturdier and less expensive. For a tub-to-shower Conversion where space is tight, glass is usually worth the spend over a curtain.
- Fixtures. A thermostatic valve and a rain head are worth it; brand-name trim (Kohler is a common pick) holds up and is easier to service later. Cheap trim fails first at the cartridge.
- Substrate and waterproofing. This is the hidden cost that separates an eight-year shower from a thirty-year one. Bonded membrane over cement board beats a painted-on roll for a wet zone.
If the conversion is part of a Bathroom Remodeling in Calabasas project that also touches the vanity or floor, we sequence it so the shower isn’t the last thing that gets torn up.
What Tub-to-Shower Conversion Costs in Calabasas, CA
Expect $3,500 – $10,000 for the conversion itself. The low end is a standard alcove with a prefab pan and acrylic walls; the high end is a curbless tiled shower with a linear drain, frameless glass, and new valve trim. Here’s what moves the number:
| Line item | Typical range |
|---|---|
| Demo and haul-away | $300 – $700 |
| Drain relocation and rough-in | $400 – $1,200 |
| Waterproofing and backer | $600 – $1,500 |
| Tile and setting | $1,200 – $3,500 |
| Glass enclosure | $500 – $1,800 |
| Valve and trim | $300 – $900 |
The variables that push a job from $3,500 to $10,000: shower size and whether you go curbless, the condition of what’s under the tub, whether the drain or valve moves, tile and glass grade, and permit scope. A written estimate lists each of those lines so you see where the money goes. What’s typically not included: structural repairs from rot or termite damage, drywall outside the shower zone, and permit fees passed through at cost. No-hassle upfront pricing means the number on the quote is the number you pay, and our 730-Day Done Right Promise backs the workmanship in writing. We also offer 0% financing for 18 months and $1,000 off projects over $10,000 if the conversion rolls into a larger job.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Homes Specifically Do to This Tub-to-Shower Conversion
Calabasas isn’t a flat suburb, and that changes how a bathroom job gets permitted and built. The city sits in the Santa Monica Mountains foothills, so the housing stock leans toward large Mediterranean and Spanish-style estates in gated communities like The Oaks and Calabasas Hills, plus 1960s-70s ranch homes and newer canyon rebuilds. That mix means we regularly work on two very different bathrooms: a 1970s ranch in the 91302 ZIP where the tub surround hides galvanized plumbing and a cast-iron drain, and a custom estate where the answer is tiled curbless with a linear drain.
The local angle that matters most for waterproofing is hard water and wildfire code. Calabasas sits in a Very High Fire Hazard Severity Zone, and post-Woolsey Fire rebuild standards plus Chapter 7A ignition-resistant requirements mean homes here are built tight against embers. That doesn’t change the shower itself, but it does mean we verify the wall assembly and venting on any canyon home, and we account for hillside drainage and slope condition when a conversion touches a lower-level bath. We cover all of Calabasas, from The Oaks to the canyon rebuilds, and pull the permits and schedule the inspection so the flood test happens before tile, not after.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in Calabasas
Most conversions take 5 – 10 working days from demo to final walk-through. The schedule depends on whether the drain moves and whether tile is a simple format or a custom layout; a prefab pan and acrylic surround land closer to 5 days, while a tiled curbless shower with glass lands near 10. Call (888) 427-1733 for a timeline on your exact bathroom.
Yes, in most cases you do. A conversion that moves the drain or changes the plumbing requires a permit and an inspection, and the pan flood test is the part inspectors check. We pull the permit and schedule the inspection as part of the job. Call us to confirm what your specific scope requires.
Usually yes, and that’s the budget-friendly path. If the new shower drains at the existing tub drain location and the valve stays put, we avoid the rough-in cost and the schedule shortens. A curbless or wider layout may need a drain move, which adds $400 – $1,200.
Expect $3,500 – $10,000. The low end is a standard alcove with a prefab pan and acrylic walls; the high end is a tiled curbless shower with a linear drain and frameless glass. Call (888) 427-1733 for an exact quote; estimates are free.
Our work is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If something isn’t right, we make it right, and the terms are in writing at the final walk-through.
Get a Free Tub-to-Shower Conversion Estimate in Calabasas
If you’re ready to trade the tub for a shower you’ll actually use, call (888) 427-1733. A live person answers around the clock, and we’ll schedule a free on-site estimate where we measure the bathroom, check the drain and valve, and hand you a written line-item quote with the permit and inspection scope spelled out. No surprises, no change orders without your sign-off. Our technicians are background-checked, arrive in uniform, and have up to 12 years of experience on jobs exactly like this one.
Written by the team at Groundwork Construction Co..