Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Calabasas: What It Takes and What It Costs
Vanities, tile and fixtures in Calabasas run $9,000 to $28,000 for a primary bath and $5,000 to $12,000 for a smaller one, and most jobs take two to three weeks of on-site work. That covers tear-out, tile setting, vanity and cabinet install, and hanging the fixtures and hardware. The number that matters is a written line-item quote, not a verbal guess. Call (888) 427-1733 and we’ll price your Calabasas bathroom against the actual finishes you want.
How the Work Actually Runs, Stage by Stage
Most contractors describe this job as “demo, tile, install.” The reality has more moving parts, and the dates shift on what you decide and when. Here’s the real sequence we run.
Stage 1: Site review and rough-in check (Day 1)
Before a tile is lifted, we measure the substrate under the old floor and check the wall framing around the vanity and shower area. If the floor is out of level by more than a quarter inch across the room, we address it now, not after the tile is set. We also confirm shutoff locations and check for any existing moisture damage around the tub or shower surround. This is where we decide together whether the plumbing stays where it is or gets moved.
Stage 2: Demo and rough-in (Days 2-4)
We pull the old vanity, tear out floor and wall tile, and remove the fixtures. If plumbing or electrical is being relocated (new vanity in a different spot, extra outlets for a lighted mirror, a heated towel bar), the rough-in happens here, and in Calabasas that means a rough mechanical/plumbing inspection before we close anything up. The rough-in inspection is not optional in a permitted job. Once it passes, we’re clear to move to the finished surfaces.
Stage 3: Waterproofing and substrate prep (Days 4-6)
This is the stage homeowners skip past in a budget conversation, and it’s the one that determines whether the tile lasts 10 years or 30. We install cement backer board in wet areas and a bonded waterproofing membrane in the shower, then let the floor leveling compound cure fully. You don’t have to make decisions here, but it does mean two days where nothing visible appears to happen. That’s normal.
Stage 4: Tile and vanity install (Days 6-12)
Floor tile goes down first, then wall tile, then grout and seal. The vanity cabinet arrives and gets set, shimmed level, and secured to the wall. Vanity tops (quartz or stone) usually get templated after the cabinet is in place, which adds a few days to the schedule. This is where you’ll want to have already picked tile and cabinet finishes, because ordering windows stretch the job. We’ll tell you on Day 1 which items have a 2-week lead and which have a 5-week lead.
Stage 5: Fixtures, trim, and final inspection (Days 12-16)
The faucet, shower valve and trim, toilet, towel bars, mirror, and lighting all get hung here. The scheduled inspection happens after the work is complete. We walk the room with you, check the shower slope with a level, run the faucets, and confirm no leaks. Any punch items get written down on the spot.
The whole sequence is part of a larger picture if you’re also touching the rest of the bathroom. For the wider scope it fits inside Bathroom Remodeling in Calabasas.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’re Choosing Between
- Vanity cabinet material: Painted MDF or plywood with a painted finish is the budget-friendly call and holds up fine in a dry bath. Solid wood or a furniture-grade cabinet (KraftMaid is one we work with) costs more but handles humidity and looks finished for decades. For a Calabasas home with a large primary bath, furniture-grade is the better long-term spend.
- Vanity top: Quartz or engineered stone is the low-maintenance standard and tolerates hard water and cleaning products without etching. Natural stone (Cambria or similar) looks richer but needs periodic sealing. Tile vanity tops are the value option and read more 1970s.
- Floor tile: Porcelain or ceramic is the workhorse; large-format 12×24 tiles read modern and have fewer grout lines. Natural stone like travertine is warmer underfoot but porous and needs maintenance. Tile over a heated floor mat adds warmth but adds cost and a day of install time.
- Shower wall tile: Large-format porcelain is easy to clean and hides less. Subway tile is classic and cheaper but has more grout lines. Natural stone mosaic costs more but gives the character a custom home in Calabasas tends to want.
- Fixtures and finishes: Brushed nickel and matte black are durable and hide fingerprints; polished chrome still reads clean and bright. Kohler and similar mid-tier brands are the practical default. Faucets and shower valves are typically the one place where a slightly higher spend pays off, because the cheap ones fail in about half the time.
- Glass and enclosure: A frameless glass shower door (not the project itself if you already have one) dresses the room. Skip this if the job doesn’t involve the shower enclosure location.
What Vanities, Tile & Fixtures Costs in Calabasas, CA
A full primary bath tile, vanity and fixture update in Calabasas runs $9,000 to $28,000. A smaller secondary bathroom runs $5,000 to $12,000. The headline number is only useful against the specific job, so here are the pieces that push a job toward the top or bottom of the range:
- Room size and tile area: A 150-square-foot primary bath vs. a 50-square-foot hall bath is a 3x difference in tile labor and material before anything else changes.
- Existing condition: A 1970s ranch with tile over a mud bed or damaged subfloor means extra demo and substrate work. A recent rebuild or a sound 1990s remodel is a cleaner start.
- Relocating plumbing or electrical: A vanity moved to a different wall, or a shower valve moved, adds $1,000 to $3,500 depending on how far the rough-in moves and what’s inside the wall.
- Material grade: Porcelain tile at $4 to $8 a square foot vs. natural stone at $12 to $25 a square foot swings the total by several thousand on a large bath.
- Permit and inspection scope: Moving plumbing or electrical requires a permit and the rough inspection. That’s a real line item (often $500 to $1,500 depending on scope), and it’s part of the written estimate, not an extra.
What’s included in a written estimate from us: demo haul-away, substrate work, waterproofing, tile material and labor, vanity and top, fixtures and hardware you select, permit fees, inspections, and cleanup. What’s not: premium stone slabs sourced outside our brand partners, custom millwork beyond the standard vanity, and moving structural walls (that’s a different scope). If the wider project is on the table, look at our Bathroom Remodeling service line. Every estimate is upfront, and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Homes Specifically Do to This Job
Calabasas sits in the Santa Monica Mountains foothills, and that geography changes what a tile and vanity job is. Most of our Calabasas work happens in gated communities like The Oaks and Calabasas Hills, or in the 1960s and 70s ranch homes the canyons still hold, and the two look nothing alike below the tile line. The custom estates frequently have oversized primary baths where a natural-stone top and a large-format tile floor come with a substrate that was laid over sheer-set or a slope that needs correction, and we run into it every few weeks. In the older ranch homes, the surprise is usually plumbing rough-in from an era before 1.5-inch drain lines were standard, or cast iron that’s reached the end of its service life. Both add real time and cost. HOA rules in the gated communities almost always govern exterior changes, but for an interior bathroom job like this, the bigger constraint is Chapter 7A fire-resistive construction standards that govern materials in Calabasas, because the city sits in a Very High Fire Hazard Severity Zone, and some permit scopes here touch walls and penetrations that trigger those standards. Zip codes 91302 and 91372 both fall under the City’s permit process. For interior tile and fixtures, the impact is on inspection scheduling – the rough and final inspection windows in Calabasas are not same-week, so plan for a slightly longer calendar than the on-site work. Homeowners who are resealing or addressing the exterior as part of a larger property project often pair this with Tile Roofing in Calabasas or Specialty Roofing in Calabasas while we already have the home opened up.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Calabasas
Two to three weeks of on-site work for a typical primary bath, and one to two weeks for a smaller secondary bath. The biggest schedule variable is finish lead time: quartz tops, custom cabinets, and many tile selections run two to five weeks before install can start. Call (888) 427-1733 and we’ll give you a realistic calendar date on your specific products, not a generic estimate.
Not for tile and a like-for-like vanity replacement. You do need one if you’re moving plumbing, adding electrical (lighted mirror, extra outlets, heated floor), or relocating the toilet. The City of Calabasas processes the permit, and the rough and final inspections happen in that sequence. We pull the permits and pass the inspections; that’s part of the estimate, not an afterthought.
Yes, and that’s actually the most common scope. Keeping the vanity in its footprint and the toilet and shower where they are lets us focus the budget on the tile, stone, cabinet and fixtures you touch every day. If the layout is genuinely bad, the wall relocation is a different conversation, but we’ll tell you what it adds before the estimate goes in writing.
$9,000 to $28,000 for a primary bathroom, $5,000 to $12,000 for a smaller secondary bath. The two biggest variables are material grade (porcelain vs. natural stone) and whether plumbing or electrical moves. Call (888) 427-1733 for an exact quote against your finishes; estimates are free.
Every tile, vanity and fixture job we do is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right, and that’s two full years of coverage on the installation. We work with you on any punch-list item at the final walkthrough and stand behind it in writing.
Get a Free On-Site Estimate for Vanities, Tile & Fixtures in Calabasas
We’ll come to your Calabasas home, measure the room, check the substrate and plumbing, and walk you through the finish options and their trade-offs. You’ll get a written line-item estimate with the number you see being the number you pay, backed by the 730-Day Done Right Promise. Calls are answered by a live person 24/7. Call (888) 427-1733 to schedule your free estimate; if it’s part of a larger scope, we cover the whole of Calabasas and surrounding canyon areas.
Written by the team at Groundwork Construction Co.