Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Calabasas: What It Costs and How Long It Takes
An aluminum fence in Calabasas runs $4,000 – $10,000 for most residential properties, and the typical job takes 2 – 4 days on site once materials are in. The number moves up or down based on linear footage, slope, gate count, and whether the crew is digging into decomposed granite on a canyon lot or setting posts in flat backyard soil. Call (888) 427-1733 and we’ll give you a real number for your property, not a range pulled off a website. Estimates are free and we walk the line with you before anything gets priced.
How We Install an Aluminum Fence, Start to Finish
Aluminum fence work rewards planning more than muscle. Here’s the actual sequence we run on a Calabasas install, with the decision points you’ll be part of.
Stage 1: Walk the line and mark utilities (day 1, 1 – 2 hours)
We walk the proposed fence line with you, confirm corners and gate locations, and call 811 to have underground utilities marked before a single shovel touches dirt. In the Santa Monica Mountains foothills, that marking step matters more than it does on flat valley lots because irrigation lines, septic laterals, and old drainage runs are often buried at odd depths. You decide gate swing direction and latch side at this stage. Getting that wrong later means re-setting posts.
Stage 2: Layout and spot the posts (day 1, 2 – 3 hours)
We string the line, set post spacing at 6 feet on center as standard (8 feet is possible on straight runs with heavier rails), and mark each hole. On sloped ground, posts get stepped in racked panels or the fence follows grade with racked sections. This is where you confirm panel height, typically 4, 5, or 6 feet. Most Calabasas homeowners go 5 feet for a backyard and 4 feet where the fence fronts a view.
Stage 3: Dig and set posts (day 1 – 2)
Posts go into holes 24 – 30 inches deep, wider than the post by several inches, and get set in concrete. Canyon properties with rocky or decomposed granite soil can slow this stage considerably. We don’t cut corners by driving posts into shallow holes; frost heave isn’t the issue here, but wind load and settling on graded slopes are. Concrete cures overnight before rails go on.
Stage 4: Hang panels, gates, and hardware (day 2 – 3)
Rails and pickets go up, then gates. A pedestrian gate adds a few hours; a double-drive gate with a self-closing hinge and drop rod adds most of a day. You choose the gate style and hardware finish at the estimate, not on install day, so nothing stalls the crew.
Stage 5: Touch-up, walkthrough, and cleanup (final half-day)
We touch up any scratched powder coat, confirm every latch and hinge operates cleanly, and walk the full line with you. Old fence removal, if you’re replacing something, gets scheduled as a separate line item so you see the cost clearly. The whole job is covered by our 730-Day Done Right Promise, and anything that isn’t right gets fixed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Choices You’ll Actually Make
Aluminum is not one product. The spec decisions below are the ones that change both the look and the price of your Calabasas fence.
- Residential vs. industrial grade: Residential aluminum uses thinner pickets and lighter rails; industrial grade uses heavier wall thickness and stands up better to wind and impact. On exposed ridgeline lots, industrial grade is worth the upcharge.
- Powder-coat finish: Standard black, bronze, or white powder coat is the norm. A quality powder coat resists fading and chalking through hot Calabasas summers; a cheap finish will look tired in a few years.
- Picket spacing and style: Flat-top, spear-top, and 2-rail or 3-rail configurations all exist. Tighter picket spacing reads more private and costs more per foot; wider spacing reads more open and lets more view through.
- Height: 4 feet for view-fronting lines, 5 feet for backyard enclosure, 6 feet where you want more separation. HOA rules may cap height, so check before you commit.
- Gate package: A basic pedestrian gate is standard; self-closing hinges, magnetic latches, and double-drive gates add cost but add real convenience.
What an Aluminum Fence Costs in Calabasas, CA
Plan on $4,000 – $10,000 for a residential aluminum fence in Calabasas. That range covers a typical backyard run with one gate; long perimeter lines, steep terrain, and multiple gates push toward the top. Here’s what moves the number.
- Linear footage: The single biggest lever. A 100-foot run and a 300-foot run are different jobs entirely.
- Terrain and slope: Flat ground is fast and cheap. Racked panels on a hillside, stepped posts, and rocky digging add labor hours.
- Gate count and type: Each gate adds hardware and install time. Drive gates with automation cost considerably more than a pedestrian gate.
- Old fence removal: Hauling off an existing wood or chain link fence is a separate line item.
- Grade and finish: Industrial-grade aluminum and premium powder-coat colors sit at the high end.
A written estimate from us lists footage, post count, gate hardware, removal, and finish as separate lines, so you see exactly what you’re paying for. Permits, if your project needs one, show up as their own line rather than buried in a lump sum.
See the difference
Before
After
Before
After
Before
AfterWhat Calabasas Properties Do to This Job
Calabasas sits in the Santa Monica Mountains foothills, which means most fence lines here run across graded slopes, canyon edges, or hillside lots rather than flat suburban yards. On a canyon property, post depth and racked panels become the whole ballgame. We’ve set posts into decomposed granite and rock that needed a rock bar and extra time per hole, and on ridgeline lots we spec heavier industrial-grade aluminum because Santa Ana wind events put real load on a fence line. The City’s hillside and oak-tree ordinances also come into play: if your fence line passes near a protected coast live oak, the setback and root-protection rules can shift where posts can go, so we walk that with you before layout. Calabasas is a Very High Fire Hazard Severity Zone, and while aluminum is already noncombustible, we pay attention to gate placement relative to defensible space. Homes in The Oaks and Calabasas Hills often have HOA architectural review, so plan a week or two for approval before install. If the fence is part of a full Fence Installation in Calabasas project, we coordinate the whole scope.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Aluminum Fence in Calabasas
Most aluminum fence installs take 2 – 4 days on site, plus a short lead time for materials and any HOA or permit approval. Slope, gate count, and soil conditions drive the difference. Call (888) 427-1733 and we’ll give you a realistic window for your specific property.
Many residential fences under a certain height don’t need a building permit, but hillside lots, HOA communities, and fences near protected oaks often do require review. We confirm what applies to your address before work starts. Call (888) 427-1733 to talk through your situation.
Expect $4,000 – $10,000 for a typical residential aluminum fence in Calabasas. Linear footage, terrain, gate hardware, and finish grade are the four biggest price drivers. Call (888) 427-1733 for an exact quote; estimates are free.
Yes. Sloped and hillside lots are common in Calabasas, and we handle them with racked panels, stepped posts, and deeper footings. Rocky canyon soil may add time to the dig. Call (888) 427-1733 and we’ll assess your slope during the free estimate.
Workmanship is backed by our 730-Day Done Right Promise, one of the longest in residential construction. If something isn’t right, we make it right. Call (888) 427-1733 to schedule your free on-site estimate.
Get a Free Aluminum Fence Estimate in Calabasas
Call (888) 427-1733 and a live person answers, any hour. We’ll set up a free on-site estimate, walk your fence line, and give you a written line-item quote with no surprise charges later. Most homeowners pair the fence with Driveway Repair & Replacement in Calabasas or Patios, Walkways & Pool Decks in Calabasas to finish the yard in one pass. Learn more about our Fence Installation service and how we cover Calabasas.
Written by the team at Groundwork Construction Co.