A Groundwork company - serving Los Angeles, CA
ADU Design & Permitting in Calabasas, CA | Groundwork Construction Co. of Los Angeles

ADU Design & Permitting in Calabasas - One Fixed Price, Permits Handled

We handle the design, the engineering, and the city permit, then build it. One contract, one crew, one accountable point of contact. Free feasibility check on your lot before you commit.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ADU Design & Permitting in Calabasas: What It Takes Before You Build

ADU design and permitting in Calabasas is a two-part job: an architect and engineer produce drawings that survive hillside and fire-zone review, then those drawings clear City of Calabasas plan check and Los Angeles County Fire before anyone breaks ground. Expect 4 to 7 months from first sketch to issued permit on a typical lot, longer on a steep canyon site that needs geotechnical work. Budget $45,000 – $130,000 for the design-and-permitting side. Call (888) 427-1733 and we’ll walk your property and tell you what your site actually requires.

Call (888) 427-1733

How We Take an ADU From Sketch to Stamped Permit

Most homeowners assume design is the hard part. In Calabasas it’s the approval sequence that eats the calendar. Here’s the order we work in.

Stage 1: Site visit and feasibility, days 1 – 7

We start on the ground. That means measuring setbacks, checking slope, locating the protected oak canopy, and pulling your parcel’s records to see what’s already been entitled. You decide at this stage whether you’re building detached, attached, or converting existing space, because that choice changes everything downstream. On canyon lots we flag grading and retaining needs before a single line is drawn.

Stage 2: Schematic design and budget check, weeks 2 – 5

We hand you floor plan options with realistic cost attached to each, not just pretty renderings. This is where you lock the footprint, the ceiling height, and the rough systems plan. Prefab paths using a manufacturer like Abodu or Cover are worth pricing alongside stick-built at this point; they can shorten the build side considerably, but they still need full local permitting. You approve the design direction here, and we confirm the budget holds.

Stage 3: Engineering and plan set, weeks 4 – 9

Structural, geotechnical, and Title 24 energy calcs get folded into a complete submittal set. On sloped properties this is where foundation engineering (caissons, stepped footings, retaining walls) gets resolved. You’re mostly waiting during this stretch, but you’re also making the finish decisions that affect drawings: location of plumbing fixtures, electrical panel sizing, window specs. Skipping those now means a revision later, and revisions cost weeks.

Stage 4: Plan check and agency review, weeks 8 – 20

We submit to City of Calabasas building and planning, then route through Fire for the WUI review and any hillside or oak-tree conditions. Comments come back in rounds; we answer them and resubmit. Homeowners tend to underestimate this stage. On a clean flat-lot submittal you might clear in 6 – 8 weeks. Add hillside, oak canopy, or a fire-rebuild overlay and it runs longer.

Stage 5: Permit issuance and construction handoff, weeks 18 – 28

Once the permit is issued you own a stamped, buildable set. If we’re carrying the build too, the drawings hand straight to our crew with no re-engineering. If you’re bidding it out, you have a package contractors can price accurately. Either way, this is part of a full Home Additions & ADU in Calabasas scope, and we can take it from permit to finished unit.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Design and Spec Choices That Shape Your ADU

Before the drawings are final, you’re picking between real options with real trade-offs. These are the ones that come up on nearly every Calabasas ADU project.

  • Detached vs. attached vs. conversion. Detached gives you the most flexibility and the most permitting (grading, utilities, fire separation). Attached is cheaper to permit but constrained by the existing structure. Conversion is fastest and least expensive but limited by what’s already there.
  • Stick-built vs. prefab. Modular units from Mighty Buildings or Dvele can cut site time and give predictable quality, but they carry their own engineering review and delivery logistics. Stick-built gives you full design freedom and smoother hillside adaptation.
  • Foundation strategy on sloped ground. Caissons and engineered retaining walls cost more up front but handle canyon lots correctly. Cheap slab-on-grade on a grade change is the wrong answer, and reviewers will say so.
  • Fire-resistant envelope. Chapter 7A compliance means ember-resistant vents, fire-rated roofing, and noncombustible siding and decking. It’s not optional in the Very High Fire Hazard Severity Zone, and it adds cost you should plan for from day one.
  • Systems and finish grade. Tankless vs. tank water heating, panel capacity, mini-split vs. ducted HVAC, and finish level all swing the budget. A rental-grade finish and a family-suite finish on the same footprint differ by tens of thousands.

What ADU Design & Permitting Costs in Calabasas, CA

Design and permitting in Calabasas runs $45,000 – $130,000, and where you land depends on your site and your scope. Here’s what drives the number:

  • Site complexity. A flat, open lot with good access sits at the low end. A canyon or hillside parcel needing geotechnical reports, caisson design, and retaining walls pushes toward the top.
  • Oak-tree and hillside review. An arborist report or a hillside ordinance condition can reshape the site plan and add review cycles, which adds design hours.
  • Prefab vs. custom. Prefab procurement can trim design hours but adds manufacturer coordination. Fully custom architecture costs more.
  • Structural and utility scope. Relocating a panel, running new sewer, or tying into an older system means more engineering and more inspection points.
  • Permit and fire-review scope. WUI review and any fire-rebuild overlays add agency rounds.

A written estimate from us breaks out architectural, engineering, geotechnical, permit fees, and agency submittal line by line, with upfront pricing and no surprises built in. What a design-only estimate typically doesn’t include is the actual construction cost or the city’s permit fees (those are pass-through and vary by valuation). If your ADU includes a kitchenette, homeowners often pair this with Cabinets & Countertops in Calabasas and pull it into one schedule.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Calabasas Sites Specifically Do to the Permit Process

Calabasas isn’t a flat grid of tract homes, and that changes the job. Much of the buildable land sits in the Santa Monica Mountains foothills, so grading, retaining walls, caisson foundations, and slope-stability review are routine rather than exceptional. On the estate side, properties in The Oaks and Calabasas Hills carry HOA design review on top of city approval, and those two processes don’t always move at the same speed. The canyon properties along Mulholland and off the hillside roads are a different animal: native coast live oaks are protected, so a modest ADU or a new driveway can trigger an arborist report and setbacks that rework the whole site plan. Add the Very High Fire Hazard Severity Zone, where Chapter 7A ignition-resistant construction is mandatory and post-Woolsey Fire rebuild standards still govern canyon projects, and an ADU here is as much an engineering and permitting exercise as a design one. If you’re also reworking the main house, Full Kitchen Remodeling in Calabasas often travels with an ADU project so both permits run together.

Serving Calabasas, CA – Our Local Coverage Area

We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – ADU Design & Permitting in Calabasas

Get a Free On-Site Estimate for Your Calabasas ADU

We’ll come out, walk the lot, check the slope and the oak canopy, and give you a written design-and-permitting estimate with line items you can actually read. Call (888) 427-1733 and a live person picks up, any hour, any day. We cover Calabasas and the surrounding canyons. Start with our Home Additions & ADU service, then let’s talk about your site.

Written by the team at Groundwork Construction Co.

Why Calabasas Chooses Groundwork Construction Co. of Los Angeles

We set the standard for ADU design & permitting in Calabasas.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Calabasas

Getting your ADU design & permitting project started is simple.

1

Call or Request a Free Estimate

Tell us about your ADU design & permitting project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local ADU design & permitting pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Calabasas Customers Say

Trusted by homeowners across Calabasas and surrounding areas.

★★★★★

"Change orders were written down and priced before the work happened, every single time. No surprise at the end."

Keisha Robinson
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for ADU Design & Permitting in Calabasas?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Calabasas.

(888) 427-1733

Request a Free Estimate in Calabasas

Tell us about your ADU design & permitting needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch