Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in San Fernando: what the job actually takes
Backsplash, Tile & Flooring work in San Fernando runs $14,000 – $45,000 for a full kitchen floor, wall tile, and backsplash package, with the range driven by square footage, substrate condition, and whether plumbing or electrical gets moved. Most kitchens we do here finish in 5 to 9 working days once materials are on site. Call (888) 427-1733 for a free on-site estimate. You’ll get a written line-item quote before anyone lifts a tile.
How we run a tile and flooring job, stage by stage
Tile is unforgiving. The finished look is decided long before the first piece goes down, in prep and layout. Here’s the sequence we follow on every San Fernando kitchen floor and backsplash package.
Stage 1: Site measure and material takeoff (day 1)
We measure every wall, count outlets and switch plates, and photograph the existing substrate. You’ll see where tile will stop, how it wraps a window or range hood, and whether the floor height will change at the doorway. You decide tile size, layout pattern, and grout color before we order. Lead time on most tile is 5 to 10 days, so this is the pacing decision on the whole job.
Stage 2: Demo and tear-out (day 2)
We pull the old backsplash, floor tile, and any damaged drywall or backer board. On mid-century San Fernando homes this is where surprises surface: old mastic, water-damaged drywall behind the counter, or a floor that’s out of level by a quarter inch across the room. We photograph what we find and tell you the cost to correct it before we proceed.
Stage 3: Substrate and prep (days 3 – 4)
Backer board goes down over the floor and up the wall, seams taped and floated, and the whole surface checked for flat. A flat substrate is what keeps large-format tile from lipping at the corners. We set the floor with a crack-isolation membrane where the slab or subfloor calls for it, which matters in a Valley home that’s seen decades of ground movement.
Stage 4: Tile setting and grout (days 4 – 7)
Layout gets snapped and dry-fit. Full pieces go at the visible edges and cuts go where the eye doesn’t land. Walls go in first, then the floor so nothing gets stepped on. Grout comes the following morning, then a cure window before sealing. You choose grout color at the estimate, not mid-job, because the wrong grout changes the whole read of the room.
Stage 5: Finish, seal, and walkthrough (days 8 – 9)
Caulk at the counter-to-wall joint, outlets and covers back on, sealer applied on natural stone, and a final clean. We walk the room with you, tile by tile, and note anything that needs attention in writing under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll be choosing between
Most of the decisions on a tile job come down to four categories. Here’s how they compare honestly.
- Porcelain vs. ceramic floor tile. Porcelain is denser, handles the seasonal temperature swings in San Fernando better, and takes a wood-look or stone-look finish convincingly. Ceramic is cheaper but chips more readily at edges. Porcelain is the default for kitchens; ceramic works for a tight budget.
- Ceramic vs. glass vs. stone backsplash. Ceramic subway tile is the workhorse: easy to clean, modest cost, ages well. Glass reads modern and brightens a small kitchen but shows smudges. Natural stone (travertine, marble) looks rich and needs sealing every year or two, which is a real maintenance commitment.
- Large-format vs. small-format tile. Big tiles mean fewer grout lines and a cleaner look, but they demand a flatter substrate and a more careful layout. Small tile is more forgiving of an imperfect wall and gives a busier texture. Neither is “better” – it’s about what the room can carry.
- Grout: cementitious vs. epoxy. Standard cement grout is cheap and repairable but stains. Epoxy grout resists staining and moisture but costs more and is harder to work. In a busy kitchen, epoxy grout on the floor is usually money well spent.
A note on specs: there is no single durability guarantee that’s better than a properly prepped substrate. The tile itself is the easy part. The prep under it is what makes the finish last.
What Backsplash, Tile & Flooring costs in San Fernando, CA
A full kitchen floor and backsplash package in San Fernando typically runs $14,000 – $45,000, and a backsplash-only job runs $800 – $2,500 on its own. That spread is wide because the variables are wide. Here’s what moves the number:
- Square footage and layout complexity. A galley kitchen with straight runs tiles quickly. An L-shape with an island, a window, and a range hood takes more cuts and more time.
- Substrate condition. Old mastic, water damage, or an out-of-level floor all add prep hours and material. This is the single most common swing factor on an aging San Fernando home.
- Plumbing and electrical moves. Relocating an outlet or a sink line means opening the wall, moving the box, patching, and re-tiling around the new location. Each move adds cost and a day.
- Material grade. Porcelain vs. ceramic, glass vs. stone, epoxy vs. cement grout – each choice has a real price delta. We show you the per-square-foot number for each so the trade-off is yours to make.
- Permit scope. A backsplash and floor swap usually doesn’t trigger a permit. If the job touches plumbing, electrical, or structure, it may, and the permit and inspection time adds to the schedule.
Your written estimate itemizes demo, prep, tile, setting material, grout, and labor. What typically isn’t included: tile itself if you’re supplying it, any repair to framing or plumbing found after demo, and appliance disconnection and reconnection. We flag those before we quote.
See the difference
Before
After
Before
After
Before
AfterWhat San Fernando homes specifically do to this job
San Fernando is one of the few LA-area cities that runs its own building department and plan check rather than routing through LA County or the City of LA. That matters on any tile job that touches plumbing, electrical, or structure. A permit here goes through City of San Fernando review, and inspectors get to know the crews working in a city only about 2.5 square miles across. Knowing the local process keeps a tile job from stalling at inspection.
The housing stock shapes the work just as much. Most of what we tile in San Fernando is postwar and early-1900s single-family bungalows and small stucco homes on tight lots. That means we regularly find original wood-framed floors that need leveling, old mastic under a backsplash, and walls that aren’t perfectly plumb. The hot, dry Valley climate also has a hand in it: tile grout and caulk around a kitchen that takes intense summer sun and seasonal temperature swings needs a flexible sealant, not a rigid one, or it cracks at the joints. We caulk with that in mind. If the tile job is part of a larger scope, we handle it as part of the Kitchen Remodeling in San Fernando we already run, and we can pair it with Vanities, Tile & Fixtures in San Fernando if you’re updating the bathroom at the same time.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Backsplash, Tile & Flooring in San Fernando
Most backsplash and floor tile packages finish in 5 to 9 working days once materials are on site. A backsplash-only job is often 2 to 3 days. The schedule depends on tile lead time, substrate condition, and permit scope. Call (888) 427-1733 for an exact timeline on your kitchen.
Usually not for a straight backsplash and floor tile swap. A permit is typically required if the job involves moving plumbing, electrical, or structural work, and that runs through City of San Fernando plan check rather than LA County. We’ll tell you in the estimate which category your job falls into.
Sometimes, but it depends on the substrate and the added floor height at the doorway. Tiling over old tile saves demo time but can leave the floor a half inch higher than the next room. We’ll tell you honestly which approach is right once we’ve measured the substrate. Call (888) 427-1733 for a free estimate.
A full floor and backsplash package runs $14,000 – $45,000, and a backsplash-only job runs $800 – $2,500. The spread comes down to square footage, substrate condition, plumbing and electrical moves, and material grade. Call (888) 427-1733 for an itemized quote – estimates are free.
Every tile and flooring job is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That covers workmanship, not tile that was installed to your material spec. Call (888) 427-1733 to go over the details before you sign.
Get a free estimate for your tile and flooring job in San Fernando
Call (888) 427-1733 to schedule a free on-site estimate for Backsplash, Tile & Flooring in San Fernando. On the call we’ll confirm your address in the 91340 or 91341 area, ask about your kitchen and material timeline, and book a walkthrough. You’ll get a written, itemized estimate with upfront pricing, with no surprises and no change orders. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.