Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in San Fernando, CA: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in San Fernando typically runs $9,000 – $28,000 for the whole job, and a full shower build-out on its own lands between $4,500 and $12,000 for the shower scope. Most full showers take two to three weeks from demo to final inspection, and the timeline depends on how much is staying: a curbless shower with moved drain lines and new valves runs longer than a like-for-like tear-out. Call (888) 427-1733 to set up a free on-site estimate and a written line-item quote.
How this shower job actually runs, stage by stage
This isn’t a vague “we handle everything” operation. Here’s the real sequence, with what you decide and when.
Day 1 – 2: Demo and tear-out
We pull the old enclosure, tile, backer board, and shower pan. If the existing pan has leaked (common in older San Fernando homes), the subfloor gets opened up and inspected. You decide now whether the drain stays where it is or gets moved, because moving it changes the price band and the schedule by a day or two.
Day 3 – 4: Rough-in plumbing and waterproofing prep
New valve and trim get set, and any drain relocation happens here. Then it’s backer board and a waterproofing membrane on the walls and floor. The membrane is the part that fails when it’s skipped; we don’t skip it. You’ll lock in your tile selection before this stage, since the membrane dictates what thickness of material the wall can carry.
Day 5 – 7: Pan, tile, and setting
The shower pan goes in with the correct slope so water leaves the floor. Tile gets set on walls and floor, with a cure window before grout. This is the longest stretch of the job because there’s no shortcut on curing. You’ll decide the grout and any accent band here.
Day 8 – 10: Grout, glass, and fixture trim
Grout, then a glass enclosure (frameless if that’s the spec you chose), plus the shower head, valve trim, and anything else that mounts to the wall. Glass typically gets measured earlier and installed within a few days, so this stage can stretch if a custom panel is involved.
Day 11 – 14: Final inspection and punch list
The plumbing and electrical inspection gets scheduled and passed, then we walk the job with you. Any silicone touch-ups, grout lines, or door truing happens here. The work comes with our 730-Day Done Right Promise, so anything that shows up after the walkthrough is on us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Curbless vs. curbed: A curbless shower (flush to the floor) looks cleaner and is the safer entry point for anyone with mobility concerns. It costs more because the floor framing has to accept a recessed drain, and the waterproofing detail is fussier. A curbed shower with a standard step-over is the less expensive route and holds up fine if the slope and membrane are done right.
- Tile grade: Porcelain is the workhorse here: dense, low absorption, holds up against San Fernando’s hard water. Natural stone (travertine, marble) looks beautiful but needs sealing and re-sealing to survive mineral-heavy water without etching.
- Glass enclosure: Frameless glass is the premium look and runs $1,500 – $3,000 on its own, depending on panel size and whether it’s a fixed panel or a door. Semi-frameless costs less and still reads as clean.
- Fixtures: A basic pressure-balance valve (Kohler, Moen, Delta) gets you dependable temperature control. Thermostatic or digital mixers cost more but give you control over exact water temperature, which matters in a house where someone’s shower gets scalded when the toilet flushes elsewhere.
- Niche vs. recessed shelf: A recessed niche adds $200 – $400 with waterproofing labor but eliminates the aftermarket shelf that rusts. Worth it if you’re tiling anyway.
- Bench or seat: A built-in bench adds waterproofing complexity and $600 – $1,400 to the job. A floating teak bench is cheaper and removable, and it doesn’t need to be tiled in.
What Walk-In Showers & Shower Remodeling costs in San Fernando, CA
The lead range for this job is $9,000 – $28,000, and the shower itself typically falls between $4,500 and $12,000, depending on scope. Anything a contractor tells you without walking the bathroom is a guess.
| Line item | Typical range |
|---|---|
| Walk-in shower installation (shower scope only) | $4,500 – $12,000 |
| Full shower replacement, like-for-like | $3,000 – $8,500 |
| Full Walk-In Showers & Shower Remodeling package | $9,000 – $28,000 |
| Vanity installation (if paired) | $800 – $3,000 |
The number that lands at the low end or high end is driven by five variables: the size of the shower footprint, the condition of what’s behind the tile (rotted subfloor or hidden mold pushes cost up), whether the drain or supply lines have to move, the tile and glass grade you choose, and the permit scope that the City of San Fernando plan check requires for the work. A like-for-like replacement that keeps the plumbing where it is sits at the bottom; a curbless conversion with moved drain, custom glass, and premium tile lands near the top. Quoted as written, no change orders. Ask about the $1,000 off projects over $10,000 and 0% financing for 18 months while you’re pricing it out.
See the difference
Before
After
Before
After
Before
AfterWhat San Fernando homes specifically do to this job
San Fernando is one of the few LA-area cities with its own building department and plan check process, which changes the schedule and the paperwork. A shower that moves a drain or adds a new circuit for an exhaust fan gets permitted through City of San Fernando inspections, not LA County, and the plan checkers here see the same local contractors often enough to know who’s actually insuring and permitting correctly. That’s a real advantage for a small job: a shower permitted through this city runs cleaner than a handshake job, and it protects you at resale.
The housing stock is the other half of it. Most of the homes we work on here are postwar and older bungalows and small stucco houses on tight lots, built to mid-century specs. That means original drain lines and aging waterproofing behind the tile you’re about to tear out, and it means the subfloor is less forgiving than in a newer build. Hard water in the San Fernando Valley also punishes any shower without proper waterproofing, so we don’t cut corners on the membrane even on a small scope. Homeowners in San Fernando often pair a shower project with larger work once they see what’s under the tile; it’s common to bring in Roof Replacement & Installation in San Fernando if the same house needs it, or Metal Roofing in San Fernando for a longer-horizon roofing spec. For a broader scope that includes the vanity, toilet, and flooring, our Bathroom Remodeling in San Fernando page covers the bigger package.
If you’re nearby, we also work in San Fernando and the surrounding areas of Santa Clarita, Stevenson Ranch, Calabasas, and Topanga. If you want a shower remodel that includes new fixtures and vanity work, that’s part of our Bathroom Remodeling service.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in San Fernando
Most jobs run 10 to 14 working days from demo to final inspection. The cure time on tile, the glass lead time, and the city inspection schedule are the three things that stretch it. Call (888) 427-1733 for a written schedule with your estimate.
Yes, if the work moves plumbing, adds a new circuit for an exhaust fan, or alters framing. A cosmetic tile swap with no plumbing changes usually doesn’t require one, but it depends on scope, and the City of San Fernando building department is the authority. We pull the permits and schedule the inspections; you don’t have to coordinate with the city.
Yes, and it’s the least expensive route. A like-for-like shower replacement that keeps the drain and valve where they are lands at the bottom of the range, roughly $3,000 – $8,500 for the shower. A curbless conversion usually means relocating the drain, which pushes the job toward the higher end.
The full package runs $9,000 – $28,000, and the shower scope alone typically lands between $4,500 and $12,000. The number depends on footprint, existing condition, plumbing changes, material grade, and permit scope. Call (888) 427-1733 for an exact quote; estimates are free.
Every project is covered by our 730-Day Done Right Promise. If anything isn’t right, we come back and make it right. It’s in writing, and it’s one of the longest workmanship guarantees in residential construction.
Get a free estimate for Walk-In Showers & Shower Remodeling in San Fernando
Call (888) 427-1733 and a live person will pick up, day or night. We’ll tell you the honest range before anyone walks the job, answer the questions about glass, tile, and timeline, and schedule a free on-site estimate with a written line-item quote. Every shower project in San Fernando is backed by our 730-Day Done Right Promise, upfront pricing with no surprises, and 0% financing for 18 months if you need it.
Written by the team at Groundwork Construction Co.