Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in San Fernando, CA: What It Involves and What It Costs
A tub-to-shower conversion in San Fernando typically runs $3,500 to $10,000 and takes five to ten working days from demo to final inspection, depending on whether the drain and valve positions stay put. The job means removing the tub, reworking the waterproofing and tile (or a prefab surround), setting a new shower base or a tiled pan, and getting the rough plumbing and waterproofing signed off by the City of San Fernando’s own building department. Call (888) 427-1733 for a free on-site estimate on your specific bathroom.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
Most contractors describe this job as “out with the old, in with the new.” The reality is a sequence, and each stage asks you to make a decision. Here’s how it runs in practice.
Stage 1: Site check and demo (day 1)
We protect the flooring and cover the doorway, then pull the tub, the surround, and any drywall behind it down to the studs. On San Fernando’s older housing stock, this is where we usually find the surprises: a tub set on a concrete bed, water damage to the studs behind the tile, or galvanized drain fittings that are past their life. You’ll decide right there whether to replace the drain and valve now or keep what’s there. Replacing them mid-job is cheaper than reopening the wall later.
Stage 2: Rough-in plumbing and framing (days 2 to 3)
The drain gets repositioned to the new shower location and the valve gets set at the right height. If we’re keeping the tub’s original footprint, this stage is quick; if the new shower is longer or wider, we’re moving framing and possibly a drain line through the floor. A licensed plumber handles the rough-in, and this is the first point where the City of San Fernando inspector normally comes out.
Stage 3: Waterproofing (days 3 to 5)
This is the stage that decides whether the shower lasts twenty years or five. We build a sloped pan, apply a bonded waterproofing membrane to the walls and floor (Schluter Kerdi and similar systems are what we typically spec), and seal every seam and corner. The membrane has to cure before tile goes on. You’ll choose your tile and shower base at the front end so nothing sits waiting.
Stage 4: Tile, base, and fixtures (days 5 to 8)
Tile goes up the walls and on the pan, then grout and sealant. The shower valve trim, head, and any glass get set once the tile cures. You’ve already picked your tile, grout color, and fixtures by this point, so this stage moves.
Stage 5: Final inspection and walkthrough (days 8 to 10)
The City of San Fernando inspector signs off on the plumbing and waterproofing, then we do a full leak test and walkthrough with you. You get the signed-off permit paperwork and a written warranty. Total: five to ten working days for a straightforward conversion, longer if the existing plumbing needs rework or framing changes.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make on a Tub-to-Shower Conversion
These are the decisions that move both the look and the number, so know the trade-offs before the job starts.
- Tiled pan vs. prefab shower base. A tiled pan costs more and takes longer, but it lets you match the floor to the walls and gives you any size or shape you want. A prefab base is faster and less expensive, but you’re locked into standard dimensions and you’ll see a visible seam line where the base meets the tile.
- Tile grade and format. Porcelain is denser and more water-resistant than ceramic and holds up better in a shower that gets daily use. Large-format tile (12×24 or bigger) means fewer grout lines to clean, but the wall has to be perfectly flat, which adds prep time. Small mosaic on the floor gives better grip underfoot.
- Framed glass vs. frameless. Framed glass costs less and installs faster. Frameless looks cleaner and the hardware holds up better long term, but the panel and door have to be cut to your exact opening, which adds a week to the lead time.
- Shower valve and trim. A basic pressure-balance valve is standard. Upgrading to a thermostatic valve gives you precise temperature control and is worth it in a household with kids or older family members.
- Niche vs. shelf. A recessed tile niche costs a little more to frame and waterproof but is far easier to keep clean than a surface-mounted shelf sitting on top of the tile.
What Tub-to-Shower Conversion Costs in San Fernando, CA
A tub-to-shower conversion in San Fernando runs $3,500 to $10,000. Most jobs land in the $5,000 to $7,500 range when the plumbing stays where it is and you’re choosing mid-grade tile and a standard valve. Here’s what pushes a job to the low or high end:
| Line item | Typical range |
|---|---|
| Demo and disposal of old tub and surround | $300 – $800 |
| Rough-in plumbing (if drain or valve moves) | $800 – $2,000 |
| Waterproofing system and pan | $600 – $1,500 |
| Wall and floor tile (material and labor) | $1,200 – $3,500 |
| Shower valve, head, and trim | $250 – $900 |
| Glass panel and door | $500 – $1,800 |
| Permit and inspection | $200 – $600 |
The four variables that move the number: whether the drain and valve stay in place (keeping them saves $800 to $2,000), how much water damage we find behind the tub, tile grade and size, and whether we’re moving walls or framing. A written estimate from us is line-item and fixed. What it doesn’t include is anything hidden behind the wall until we open it, which is why we walk through the “if we find this, here’s the number” scenarios with you before demo day. That’s Upfront pricing, no surprises, and it’s how we do every project under our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat San Fernando’s Housing Stock Does to This Job
San Fernando runs its own building department and plan check process, separate from LA County and LA City. That matters here: the permitted scope and inspection sequence for your conversion go through the City of San Fernando, not a county office, and the inspectors in a city this size (about 2.5 square miles) know the local contractors and the local stock. On top of that, much of the housing is mid-century and older: postwar bungalows and small stucco homes, which means the framing behind your tub may be original, and the plumbing may be a mix of galvanized and copper. In the older homes off Maclay and Brand, we regularly see tub surrounds that were built on drywall rather than backer board, which is why the waterproofing rebuild matters as much as the tile. The hot, dry San Fernando Valley climate also affects this job in a small but real way: seasonal expansion and contraction on exterior walls can open grout lines, so we spec flexible sealant at the movement joints rather than grout. Homeowners here often pair this kind of interior plumbing work with exterior projects; some schedule it alongside Metal Roofing in San Fernando or Tile Roofing in San Fernando to get the whole house squared away at once. Whether you’re doing just the shower or it’s part of a full Bathroom Remodeling in San Fernando, we cover the whole San Fernando area, including the ZIP codes 91340 and 91341. For the broader scope of what we do, see our Bathroom Remodeling service page.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in San Fernando
Most conversions take five to ten working days, plus the permit turnaround from the City of San Fernando, which typically runs one to three weeks. If the plumbing stays in place and you’re choosing standard tile, you’re closer to five days. Call (888) 427-1733 for a timeline specific to your bathroom.
Yes, a permit is required whenever plumbing or waterproofing is changed, which a conversion always involves. Because San Fernando runs its own building department, the permit is pulled through the City of San Fernando, not LA County. We pull the permit and handle the inspection as part of the job. Call (888) 427-1733 to talk through what your project needs.
Yes, and that’s the most common and least expensive approach when the new shower fits the existing tub footprint. Keeping the drain and valve in place saves $800 to $2,000 and avoids framing work. If you want a longer or wider shower, expect to move a drain line and some framing, which adds a few days and cost.
Tub-to-shower conversion in San Fernando runs $3,500 to $10,000, with the mid-point around $5,000 to $7,500. The variables are plumbing relocation, water damage found at demo, tile grade, and glass configuration. Call (888) 427-1733 for an exact quote, and the estimate is free.
Every tub-to-shower conversion we do is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right, for two years. That covers our workmanship, the waterproofing, and the tile install, and it’s written into the contract rather than buried in fine print. Call (888) 427-1733 with any questions about coverage before you commit.
Get a Free Tub-to-Shower Conversion Estimate in San Fernando
Call (888) 427-1733 to schedule a free on-site estimate for your tub-to-shower conversion in San Fernando. We’ll look at your bathroom, check what’s behind the tub, and give you a written line-item quote with a fixed price and the permit included. Calls are answered by a live person around the clock, the consult is free, and we offer 0% financing for 18 months along with $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.