Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in San Fernando, CA: What It Costs and How Long It Takes
A wood fence in San Fernando typically runs $3,500 to $9,000 for a standard residential lot, and most jobs are built in two to four days once materials are on site. That range covers a 6-foot dog-ear cedar or pressure-treated pine fence with steel posts, a gate, and haul-away of the old fence. Call (888) 427-1733 for a free on-site estimate with a written, line-item quote.
How the Build Actually Runs, Day by Day
Wood fencing has a short list of stages, but each one has a decision attached to it, and the better jobs are the ones where those decisions get made before anyone digs. Here’s the real sequence we run in San Fernando.
Stage 1: On-site measure and line layout (day of estimate)
We walk the property line with you, measure the total run in linear feet, count gates, and note grade changes, tree roots, and anything buried where posts will go. This is where you confirm the height (most San Fernando lots are built at 6 feet, with 4-foot front-yard sections where the city requires visibility) and the material. You get a written quote the same visit, not a phone number three days later.
Stage 2: Utility marking and demo (day 1)
Before a single post goes in, we call 811 for utility locating so nobody drives a digging bar through an irrigation line or a gas lateral. Then the old fence comes out: panels down, posts pulled or cut at grade, concrete footings broken out, and debris hauled. On a typical 150-foot run this is most of a day. On older San Fernando lots, this is also when we find out whether the previous fence was set in proper footings or just buried in dirt, and that changes the post plan.
Stage 3: Post setting and footings (day 1 into day 2)
Posts get set in concrete, spaced at 8 feet on center, plumbed, and braced. We let them cure overnight, which is the single biggest reason a wood fence stays straight for a decade instead of leaning in three years. This is the stage where cheap fence companies skip the cure and nail panels onto green posts the same afternoon. You’ll see it happen on a lot of fences around town.
Stage 4: Rails, pickets, and gates (day 2 or 3)
Rails go on, pickets run the line, and gates get framed and hung with hinges that carry the load, not hinge screws into a single picket. A standard straight run of 150 feet is a day of framing and picketing for a two-person crew. Double gates and sloped sections take longer.
Stage 5: Finish, cleanup, and walkthrough
We do a final walk with you, check every gate swing and latch, and confirm the run is straight and the post caps are set. If you’re taking a stain or sealer (recommended, not required), it goes on after the wood dries, usually 30 to 60 days later. All of this is covered by our 730-Day Done Right Promise, and the whole job is backed in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Price moves fast depending on what you pick. Here’s the honest trade-off on each call.
- Cedar vs. pressure-treated pine. Cedar resists rot and bugs naturally, ages to a silver-gray, and runs $8 to $14 more per linear foot. Pressure-treated pine is the value pick and holds up well in San Fernando’s dry heat but will need a stain cycle every few years to look sharp.
- Dog-ear vs. board-on-board. Dog-ear pickets are the standard, cheapest, and let a little air through. Board-on-board overlaps pickets for full privacy and a heavier look, usually 15 to 20 percent more in material and labor.
- Post type. Postmaster steel posts cost a bit more up front and outlast wood posts by twenty years in this climate. Wood posts set in concrete are the traditional choice and the one most homeowners pick when budget drives the call.
- Height and style. Standard 6-foot privacy runs are the norm. 4-foot sections for front yards, 7-foot if you want more privacy from a two-story neighbor, though anything over 6 feet in most San Fernando lots needs to clear height rules.
- Gates. A single walk gate is standard. A double drive gate with a drop rod and heavy hinges adds labor and hardware cost, and you need to decide the swing direction before we frame it.
What Wood Fence Costs in San Fernando, CA
The number most homeowners here land on is $3,500 to $9,000 for a full residential run. Here’s what pushes a job to either end of that range.
- Linear footage. A 100-foot corner lot sits near the bottom. A 200-foot fence with a double gate sits near the top.
- Demo and haul-away. Removing an old fence with concrete footings runs $600 to $1,400 depending on run length and how much concrete comes up.
- Material grade. Cedar and board-on-board push the total to the high end. Pine dog-ear keeps it low.
- Post type. Steel posts add a modest premium that pays back in longevity.
- Site conditions. Slopes, root-bound lines, and hard ground (typical on older San Fernando parcels) add labor. Tight lots mean materials get hand-carried instead of wheeled in.
A written estimate from us lists the linear footage, material spec, post type, gate count, demo scope, and total price. What’s typically not included: stain or sealer (quoted separately), landscape repair after demo, and any HOA or city permit fees if a permit is required. Upfront pricing means the number on the quote is the number you pay, no change orders.
See the difference
Before
After
Before
After
Before
AfterWhat San Fernando Homes Specifically Do to This Job
San Fernando is its own incorporated city with its own building department, plan check, and inspection process, all inside about 2.5 square miles. That’s the fact that changes this job most. A fence on a parcel in 91340 or 91341 does not go through LA County or City of LA review, and inspectors here know the local contractors by name. Front-yard fences and any run over standard height are the ones most likely to need a city review before you dig. Most backyard privacy fences don’t, but we confirm before the first post goes in, because tearing out a finished fence is a bad way to learn.
The housing stock matters too. Most of the homes we fence in San Fernando are postwar or early-1900s bungalows and small stucco houses on tight lots, and a lot of those rear property lines run through old concrete patios, buried irrigation, and post footings from a fence that was replaced twice already. The hot, dry Valley summers are hard on wood: intense UV bleaches and checks unfinished pine in two summers, which is why we press homeowners to seal. Tight lots also mean the fence line often sits right up against a neighbor’s structure, so set-back and lot-coverage rules that differ from nearby LA City parcels come into play. Contractors who work the whole Valley know to check those before promising a line. If the fence is part of a full Fence Installation in San Fernando, we coordinate the layout with the rest of the work at the same time.
Serving San Fernando, CA – Our Local Coverage Area
We serve San Fernando and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in San Fernando
Most residential wood fences in San Fernando are built in two to four working days. Post setting takes one day, the concrete cure adds an overnight wait, and picket and gate framing is one to two more days. A large run with a double gate can run five.
Most backyard privacy fences under standard height don’t require a building permit, but front-yard fences and any run over the height limit in San Fernando do. Because the city runs its own building department rather than LA County or City of LA, the rules apply differently than on a parcel a few blocks away. We confirm what your specific lot requires during the estimate.
No. The written quote lists linear footage, material, post type, gates, and demo scope, and that’s the price. If we discover something buried or damaged on the line, we show you before touching it and get your approval in writing. Upfront pricing, no surprises.
Cedar is the top pick for this climate. San Fernando’s dry heat and heavy UV punish unfinished wood, and cedar’s natural oils resist rot and checking far better than pine. Pressure-treated pine is the budget pick and does fine if you commit to a stain cycle every few years.
Yes on both. All wood fence work is covered by our 730-Day Done Right Promise, and we offer 0% financing for 18 months plus $1,000 off any project over $10,000. Calls are answered by a live person around the clock, and our technicians arrive in uniform and are background-checked.
Get a Free Wood Fence Estimate in San Fernando
If you’re planning a wood fence in San Fernando, call (888) 427-1733 for a free on-site estimate. We’ll walk the line, measure it, talk through material and post options, and leave you with a written quote the same visit. Homeowners in San Fernando also pair the work with Paver Driveways in San Fernando or Concrete Driveways & Concrete Work in San Fernando, and we quote all of it on the same trip so you can see the whole scope before you commit.
Written by the team at Groundwork Construction Co.