Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Malibu, CA: What It Really Takes
Cabinets & countertops in Malibu run $14,000 – $45,000 for a full tear-out and rebuild, and most kitchens land around 3 to 5 weeks from demo to final caulk. The number is driven less by square footage than by what’s behind the old boxes: hillside framing, out-of-level walls, and coastal-grade materials. Call (888) 427-1733 for a free on-site estimate with line-item pricing you can read before you commit.
How we run a cabinet and countertop job, stage by stage
Every Malibu kitchen we touch follows the same order, and the order matters. Skipping a step here is how cabinets end up shimmed, counters crack, and the job drags into month two.
Stage 1: Site measure and template planning (day 1, about 2 hours)
We laser-measure walls, check plumb and level, and note where the floor drops or the wall bows. On Malibu hillside homes that’s often 1/2 inch over an 8-foot run. You decide the cabinet layout and door style now, and we confirm appliance sizes because a 36-inch range hood changes the whole upper cabinet run.
Stage 2: Demo and prep (days 2 – 3)
Old cabinets, counters, and backsplash come out. We inspect for water damage, soft drywall, and anything the old install hid. You decide whether to keep the existing plumbing and electrical locations or move them. Moving a sink or adding a circuit adds time and money, and we tell you which before we cut.
Stage 3: Cabinet set and level (days 4 – 6)
Base and wall cabinets get set, shimmed, and fastened to studs. Crown and light rail go on. On a coastal build we use corrosion-resistant fasteners as standard, not an upgrade. You confirm drawer and door hardware placement here.
Stage 4: Countertop template and install (days 7 – 14)
Stone and quartz get templated after cabinets are set, then fabricated off-site and installed roughly 5 to 10 business days later. You pick the slab, edge profile, and sink cutout. This is the longest single wait in the job, and it’s the one homeowners underestimate.
Stage 5: Sink, faucet, and punch list (days 15 – 21)
Plumbing connects, disposal goes in, and we walk the job with you. Any adjustment or touch-up is covered by the 730-Day Done Right Promise. If the wider project includes new flooring or lighting, that’s usually handled as part of Kitchen Remodeling in Malibu.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Stock vs. semi-custom cabinets. Stock boxes are fast and cheaper but come in fixed sizes, so filler strips show on out-of-square walls. Semi-custom (KraftMaid is a brand we work with) lets you match odd dimensions and grades, which matters in older Malibu homes where nothing is plumb.
- Quartz vs. natural stone. Quartz is non-porous and resists staining, and it handles salt air without etching; Cambria is one line we install. Granite and marble look richer but need sealing and can stain. For coastal homes, quartz is the easier long-term choice.
- Slab thickness and edge. Standard 3cm slabs keep cost down; a 2cm slab with a built-up edge looks thicker for a modest upcharge. Simple eased edges cost less than ogee or waterfall profiles.
- Door and drawer fronts. Painted MDF is economical; solid wood and plywood boxes hold up better over time, and marine-grade hardware resists the salt spray that eats cheap hinges in a couple of seasons.
What Cabinets & Countertops costs in Malibu, CA
Expect $14,000 – $45,000 for a full cabinet and countertop replacement, with cabinet installation alone running $4,000 – $13,000 and countertop installation $2,000 – $6,500. An island adds $3,000 – $10,000, and new backsplash $800 – $2,500. Five things push the job toward the high end:
- Size and layout. A galley is a fraction of the cabinet count of a large open-plan hillside kitchen.
- Existing condition. Out-of-level floors, water damage, or failing drywall adds prep time.
- Moving plumbing or electrical. Relocating a sink or adding circuits is real labor and can pull in a permit.
- Material grade. Semi-custom cabinets and 3cm quartz sit well above stock lines and laminate.
- Access. Narrow canyon roads and steep driveways mean delivery scheduling and sometimes a smaller truck.
Your written estimate lists what’s included: demo, cabinets, counters, install labor, haul-away, and permit fees where required. It won’t cover appliance purchases, structural changes, or unexpected rot found after demo unless we write them in. No surprises is the goal, and the number you see is the number you pay. 0% financing for 18 months and $1,000 off projects over $10,000 are available.
See the difference
Before
After
Before
After
Before
AfterWhat Malibu homes specifically do to this job
Malibu construction is shaped by the Santa Monica Mountains meeting the Pacific. A countertop template that’s perfect on a flat lot in the valley can be wrong here, because hillside homes shift and settle. We check for slope movement as part of the measure, because a cabinet run installed level on a moving floor will crack a counter within a year. Many builds here also fall under coastal development permits and fire-hardening requirements (WUI codes), which can add review time before any installation begins, especially when the job touches a wall or window opening.
Access is its own factor. Canyon roads like Latigo and Encinal are the only way in to plenty of hillside sites, so we schedule slab and cabinet deliveries around narrow, winding grades and never assume a full-size truck can turn around. The housing stock runs from mid-century beach bungalows along the PCH frontage to contemporary hillside estates, and we work on both. The salt air and marine layer are why we spec corrosion-resistant fasteners and marine-grade hardware on every install in ZIP 90265. We cover the whole of Malibu, from the beachfront to the canyons.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Malibu
Plan on 3 to 5 weeks from demo to punch list, with the countertop fabrication wait (5 to 10 business days) being the biggest single gap. Custom or imported slabs can stretch that. Call (888) 427-1733 for a timeline built around your specific slab and layout.
A straight swap in the same footprint usually doesn’t require a permit, but relocating plumbing, electrical, or any load-bearing structure does. Coastal and hillside properties can add review time when the job touches an exterior wall. We pull the permits and pass the inspections, and your estimate lists them upfront.
Yes, and staying in the same footprint is the fastest, most cost-effective route. Keeping the sink and range where they are saves labor and avoids permit scope. Many homeowners pair the kitchen work with Walk-In Showers & Shower Remodeling in Malibu or, for the guest bath, a Tub-to-Shower Conversion in Malibu, and we coordinate both under one schedule.
The full range is $14,000 – $45,000, with cabinets at $4,000 – $13,000 and counters at $2,000 – $6,500 as line items. Islands, backsplash, and hardware add on top. Call (888) 427-1733 for an exact quote; estimates are free and line-itemized.
Every cabinet and countertop job is backed by our 730-Day Done Right Promise. If something isn’t done right, we make it right, for two full years after install. Our technicians have up to 12 years of experience, and all are background-checked and arrive in uniform.
Get a free estimate for Cabinets & Countertops in Malibu
Call (888) 427-1733 for a free on-site estimate. We’ll measure, check plumb and level, confirm what’s behind the existing boxes, and hand you a written line-item quote with the material choices spelled out. Calls are answered by a live person, 24/7, and our kitchen remodeling team handles the full scope from foundation to finish line when your project grows past the cabinets.
Written by the team at Groundwork Construction Co.