Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Malibu, CA: What They Cost and How They’re Built
Custom & geometric windows – arch-tops, trapezoids, rake-head triangles, radius bays and corner glass – are made to order and run roughly $8,000 to $25,000 installed in Malibu depending on count, glazing and how the openings are framed. Most jobs take 6 to 10 weeks from final measurement to the day the last unit is set, with coastal permit review the usual long pole. Call (888) 427-1733 for a free on-site estimate.
How we take a geometric window from drawing to sealed opening
Shaped windows are not a stock item, so the sequence is tighter than a standard replacement. Here is what actually happens, and where your decisions land.
Stage 1 – Site measure and design intent (day 1, about two hours). We photograph and measure every opening, check how plumb the existing framing is, and talk through which windows you want shaped and why: an arch that follows a roofline, a triangular clerestory on a canyon-facing wall, a porthole. You decide the shapes here, not later. If the openings don’t exist yet, this becomes a framing conversation.
Stage 2 – Framing and structural check (days 2 to 4). A shaped opening carries load differently than a rectangle. We verify headers, king studs and cripples, and if a wall needs a new header for a wide rake window, that gets built now. Engineered plans may be required on bluff and canyon lots, so we flag that early. Your decision: whether to widen an opening for the shape you want, which is the single biggest cost lever.
Stage 3 – Order and fabrication (weeks 2 to 8). Custom units are templated and built to the manufacturer’s line. This is where Andersen and Marvin earn their price – consistent radii and matching finish. You confirm glass (tempered where code requires), grille pattern, and interior/exterior finish. Nothing gets ordered twice, so the measurement is checked twice.
Stage 4 – Removal and prep (day 1 of install). Rough openings get squared, flashing and sill pans go in, and we inspect for rot or water damage before anything is set. On old beach bungalows this is where surprises show up.
Stage 5 – Set, seal, finish (days 2 to 3 of install). Units are shimmed, fastened, insulated and flashed; trim and interior casing go on, then final inspection where the permit calls for one. You walk the job and confirm operation and finish before we’re gone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Shaped glass is a smaller menu than people expect, and the honest trade-offs matter more than brand names. Most Malibu projects land on a few real choices:
- Frame material – wood-clad aluminum vs. solid wood vs. vinyl. Clad aluminum on the exterior with wood or clad interior is the salt-air sweet spot: the aluminum skin takes the spray, the wood gives you the look. Solid wood is beautiful and needs maintenance on a coastal exposure. Vinyl is the budget option but fewer makers tool it in tight radii.
- Glazing package. Double-pane with a low-e coating is standard; on west-facing ocean walls it cuts heat gain and glare noticeably. Tempered glass is required where a shaped unit sits low or near a door, so factor that in.
- Shape tolerance. Arches and true radii cost more per unit than a triangle or trapezoid cut from a rectangular frame. A gentle arc over a kitchen window is cheaper than a full half-round bay. Have the conversation before you fall in love with a curve.
- Grille and finish. Divided lites and custom paint or stain add cost and lead time. Usually worth it on a focal geometric window, usually not on a clerestory nobody gets close to.
What Custom & Geometric Windows cost in Malibu, CA
Installed cost for custom shaped windows in Malibu runs $8,000 to $25,000 for a typical project. A single arch or triangle, framed and installed, can land near the bottom; a house with a half-dozen shaped openings, engineered framing and coastal review pushes toward the top. Here’s what moves the number and what a written, line-item estimate should cover.
| Line item | Typical $ range |
|---|---|
| Single shaped unit, framed and installed | $1,800 – $5,500 per window |
| Structural framing / new header for a wide opening | $1,200 – $6,000 |
| Flashing, sealant and trim finishing | $400 – $1,800 |
| Coastal / engineered plan review (where required) | $500 – $3,000 |
The variables that push low vs. high: how many units and how complex the shapes; whether openings are new (framing and header work) or replacing existing; whether the grade and exposure force premium clad or marine-grade hardware; the glazing spec; and the permit scope, which on a bluff or canyon lot can add coastal review on top of a standard building permit. A written estimate lists each unit, the framing, the flashing and the permit line, and holds the price – $1,000 off projects over $10,000 and 0% financing for 18 months help on a larger job. What it typically doesn’t cover unless spelled out: drywall repair and paint inside, and unseen rot found once the wall opens.
See the difference
Before
After
Before
After
Before
AfterWhat Malibu homes specifically do to this job
Malibu is where the Santa Monica Mountains meet the Pacific, and that changes shaped-window work in ways no inland page mentions. Bluff-edge and hillside lots on Latigo and Encinal often sit under coastal development permits and geotechnical slope-stability review, so approvals can stretch before installation. Salt spray pits exterior fasteners and hinges, so we spec corrosion-resistant; the chaparral interface means fire-resistant assemblies are part of the conversation. The housing stock is mostly detached single-family – mid-century beach bungalows along PCH, contemporary hillside estates up the canyons – and we routinely find sill rot and water intrusion on bungalows before setting a new unit. Many canyon sites are only reachable by narrow, winding grades, so glass and materials are scheduled around access.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Malibu
Plan on 6 to 10 weeks from final measure to finish, most of it fabrication and permit review; the install itself is 2 to 3 days on site. Call (888) 427-1733 for a scheduling estimate – the free estimate is the first step.
Yes, in most cases – new openings or size changes require a building permit, and bluff or canyon lots may also hit coastal review. We handle the permit scope and inspection, and it’s a line item on the written quote.
Usually. Replacing an existing window with a shaped one keeps framing; a wider rake window or new opening requires a header and possibly engineered plans. That’s the call that most moves the price.
Installed, $8,000 to $25,000, with a single shaped unit framed and installed around $1,800 to $5,500. Call (888) 427-1733 for an exact quote – estimates are free.
Our 730-Day Done Right Promise covers the installation and framing workmanship for two years – if it’s not done right, we make it right – on top of the manufacturer’s window warranty. It’s set out in writing before work starts.
Get a free estimate on custom & geometric windows in Malibu
Shaped windows are a design decision and a structural one, so the estimate starts on site. Call (888) 427-1733 – a live person answers, day or night – and we’ll set a visit in Malibu, measure the openings, talk shapes and glazing, and hand you a line-item written price. Homeowners often pair the exterior work with Concrete Driveways & Concrete Work in Malibu or Asphalt Driveways & Resurfacing in Malibu, and it’s part of a full Windows & Doors in Malibu scope. See our Windows & Doors service and how we cover Malibu.
Written by the team at Groundwork Construction Co.