Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence Installation in Malibu, CA: What It Costs and What to Expect
A wood fence in Malibu, CA runs $3,500 to $9,000 for most residential jobs, and a typical property line install takes two to four working days once materials are on site. The number swings on length, height, wood species, terrain, and how hard it is to get a truck close to the fence line. Call (888) 427-1733 and we’ll walk your property, measure the run, and hand you a written line-item estimate before anyone swings a hammer.
Worth knowing up front: on hillside and bluff-edge lots here, fence work is rarely just fence work. Slope, drainage, and fire-hardening requirements shape the plan before the first post goes in the ground.
How We Build a Wood Fence in Malibu, Start to Finish
Every job follows the same five stages. What changes is how long each one runs, and that’s driven mostly by your access and your grade.
Stage 1: On-site measure and mark (day 1, 1 – 2 hours)
We walk the property line with you, confirm the boundary against your plat or survey, and flag any utility lines before we dig. You decide the fence height, the run, and whether you’re keeping any existing sections. On canyon lots, we also check whether a delivery truck can turn around or whether materials need to be hand-carried up the last stretch.
Stage 2: Demolition and post layout (day 1, half a day)
Old fencing comes out, posts get laid out at 8-foot spacing (6-foot on taller runs for rigidity), and we set the corner and gate posts first because they carry the load. You sign off on post placement before we start setting concrete. This is the stage where a fence that looked straight on paper suddenly has to follow a grade, and we handle that with stepped panels rather than a wavy top rail.
Stage 3: Post setting and cure (days 1 – 2, cure time 24 – 48 hours)
Posts get set in concrete footings sized to your soil and height. We don’t rush the cure, and on sandy or graded-slope lots we go deeper. You don’t have to do anything during the cure except stay off the footings, which matters more than people think if you have dogs or kids using the yard.
Stage 4: Framing and pickets (days 2 – 3, one to two days)
Rails, pickets, and trim go up. You decide at this point whether you want board-on-board, side-by-side, or a shadowbox design, and whether the finished side faces the neighbor or the street. Gaps, cap rail, and post caps get locked in here too. Most of the visible work happens in this window.
Stage 5: Gate hang and cleanup (day 3 – 4, half a day)
Gates get hung with hardware rated for coastal air, which on this stretch of coast means stainless or hot-dip galvanized, not the zinc-plated stuff that rusts out in a couple of seasons. We haul off the demo, walk the fence with you, and log anything that needs attention under the 730-Day Done Right Promise. You approve the finished fence in person before we close the job out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Wood Fence Options You’ll Actually Choose Between
Wood isn’t one product. The species and grade you pick drive both cost and lifespan, and on this coast the wrong choice shows up as warped pickets and rusted hardware within a few years.
- Cedar (Western red cedar): The standard for good reason. Naturally rot-resistant, stable in humidity, and holds stain well. Runs toward the higher end of the range but lasts far longer than pine in salt air.
- Pressure-treated pine: The budget pick. Cheaper up front, but it moves, checks, and needs re-staining more often. Fine for a short-run side yard fence; a poor fit for a long street-facing run where appearance matters.
- Redwood: Premium option, beautiful and durable, but push the cost toward the top of the range. Worth it on a front fence where you want the look to last.
- Board-on-board vs. side-by-side: Board-on-board overlaps pickets for full privacy and better wind resistance. Side-by-side (butt-joint) costs less but lets light and wind through the gaps.
- Height and run length: 6-foot is standard; 8-foot runs (privacy walls, screening) need deeper posts and heavier framing.
- Finish: Clear or semi-transparent stain on cedar reads warmer and lasts longer than a solid-color paint, which tends to peel on sun-facing panels.
For the fence, post anchors, and concrete, we use proven, widely specified material like Sackrete for footings. We’ll bring real samples of each species so you can see how they look against your house, not just on a swatch sheet.
What a Wood Fence Costs in Malibu, CA
Most wood fence installs here land between $3,500 and $9,000. A short side-yard run in pressure-treated pine sits at the low end; a long, tall, cedar board-on-board fence with gates and a tricky hillside grade pushes toward the top. Here’s what moves the number:
- Linear feet and height: The single biggest driver. More panels, taller panels, deeper footings, more posts.
- Wood species and grade: Pine to cedar can swing a job by a couple thousand dollars on a long run.
- Terrain and access: A flat PCH-front lot is straightforward. A canyon hillside where materials have to be carried or a delivery has to stage on a narrow grade adds labor.
- Gates and hardware: Each gate plus coastal-rated hinges, latches, and drop rods adds cost and install time.
- Existing fence removal: Demo and haul-away, especially on old or overgrown fence lines.
Your written estimate lists every line: footage, species, height, gates, hardware, footings, demo, and cleanup. It does not include things that sometimes surprise homeowners, like repairing damaged soil, cutting back heavy vegetation that blocks the fence line, or relocating an irrigation line that runs along the boundary. We’d rather flag those and price them honestly than surprise you mid-job.
If your fence work is part of a full property update, you’ll want to look at our fence installation service for the broader scope, and see how we cover it across Malibu.
See the difference
Before
After
Before
After
Before
AfterWhy Fence Work in Malibu Is Different From Anywhere Inland
Building anything here starts with a hard fact: the Santa Monica Mountains meet the Pacific, and nearly every project is a hillside or bluff-edge build. Coastal development permits, geotechnical slope stability reports, and fire-hardening requirements shape design before a single permit is pulled. That means fence placement on a graded slope isn’t just aesthetics. Post footings have to account for slide potential, and a run that sits in a fire-prone chaparral interface needs noncombustible hardware and sensible setbacks from structures.
The housing stock tells the story too. This is overwhelmingly detached single-family homes, from mid-century beach bungalows along the PCH frontage to large contemporary hillside estates on canyon and bluff lots. On older canyon properties we regularly see fence runs that were never built to code and post footings sitting on fill rather than native soil. Access on canyon roads like Latigo and Encinal is often the only way in, so concrete trucks and deliveries have to be scheduled around narrow, winding grades. When a hillside job calls for full project scope, homeowners often pair fencing with paver driveways in Malibu or concrete driveways and concrete work in Malibu so the driveway, gate, and fence line are planned together.
The climate shapes material choices just as much. Marine layer and salt spray make corrosion-resistant fasteners and marine-grade hardware routine, and Santa Ana wind events test any fence that isn’t framed and anchored properly. Winter rain on steep terrain raises drainage and erosion concerns on nearly every site. A fence is often the first place these forces show, which is why we specify the wood and footings for the coast, not for the catalog.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Wood Fence in Malibu, CA
Most residential wood fence installs take two to four working days from demolition to final walkthrough. The longest stages are post-setting and the concrete cure, which alone takes 24 to 48 hours. A simple, flat-ground run can finish on the shorter end; a hillside lot with tricky access pushes to four days or more. Call (888) 427-1733 to get a site-specific timeline.
It depends on height, location, and whether the property is under coastal or HOA jurisdiction. Most standard residential fences at 6 feet fall under local height rules, but on bluff-edge and hillside lots with Coastal Commission involvement, approval can add weeks or months. We check your specific parcel rules before we order material, and we pull what’s required so nothing gets flagged after the fact. Call us with your address and we’ll tell you what applies.
Yes, if it’s built with the right materials. Cedar or redwood boards with stainless or hot-dip galvanized fasteners and coastal-rated gate hardware hold up well. The failure we see most is pressure-treated pine with cheap plated hardware that rusts and bleeds streaks within a couple of seasons. We specify for the coast, so your fence holds its look and structure. Call (888) 427-1733 to talk species and hardware for your site.
Most jobs run $3,500 to $9,000, driven by footage, height, wood species, terrain, and gates. A short pine side yard sits at the low end; a long cedar board-on-board run with gates and hillside access reaches the high end. Your written estimate breaks out every line so nothing is hidden. Call (888) 427-1733 for a free on-site estimate and a firm number.
Every fence we build is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. That covers workmanship on posts, framing, and install for two full years, and we back it in writing. Material manufacturer warranties apply separately. Call us to review what’s covered before you commit to any contractor.
Get Your Free Wood Fence Estimate in Malibu
Call (888) 427-1733 to schedule a free on-site estimate for your wood fence in Malibu. We’ll walk the fence line with you, measure the run, confirm what permits apply to your parcel, and hand you a written line-item quote with no surprises. A live person answers the phone around the clock, so you won’t land in voicemail. Most projects over $10,000 also qualify for $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.