Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Malibu, CA: What the Job Actually Involves
A paver driveway in Malibu runs $7,000 – $18,000 for most residential projects, and a typical drive takes four to seven working days once materials are on site. The work is demolition, base preparation, compaction, edge restraint, then setting pavers over a compacted aggregate base with a sand joint fill. On canyon and bluff lots the prep stage takes longer than the setting. Call (888) 427-1733 for a free on-site estimate with a written line-item quote.
How We Build a Paver Driveway, Stage by Stage
Every job is different, but the sequence doesn’t change much. Here’s what happens and when.
Stage 1: Site walk and layout (day 1)
We mark the drive’s footprint, confirm the slope and drainage direction, and check where water will run off onto the street or a landscape swale. You decide the paver pattern and color at this stage, because the order has to go in before demo. On hillside lots we also flag any soft spots or old subgrade issues that need over-excavation.
Stage 2: Demolition and haul-off (days 1 – 2)
Existing concrete, asphalt or gravel comes out, along with roots and any failed base material. A standard two-car drive produces four to eight truckloads of debris. If access is tight off a canyon road like Latigo or Encinal, we schedule haul trucks around the narrow grades so we’re not blocking a neighbor’s only way out.
Stage 3: Base preparation and compaction (days 2 – 4)
This is the stage that decides whether the drive lasts 30 years or 8. We excavate to the correct depth, bring in crushed aggregate base, and compact it in lifts. Each lift gets compacted before the next goes down. On graded slopes we may add a geotextile separation layer to stop the native soil from pumping up into the base.
Stage 4: Edge restraint and paver setting (days 4 – 6)
Concrete or plastic edge restraint goes in first, pinned and set so the field can’t spread under load. Then the pavers go down in the pattern you picked, cut to fit at the edges and around any utilities. You’ll be asked to confirm the pattern and layout before we lay the field, because changes after that point mean pulling pavers back up.
Stage 5: Joint sand, compaction and cleanup (days 6 – 7)
Polymeric or washed sand goes into the joints, the field gets a final pass with a plate compactor, and we sweep and wash the surface down. You get a walkthrough, and any punch-list items get handled. A driveway that’s part of a full Driveway & Pavers in Malibu plan (with a matching walkway or apron) usually picks up one extra day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decision comes down to material, joint sand and pattern. Here’s what you’re actually picking from.
- Concrete pavers (the standard choice) – Interlocking concrete pavers handle the freeze-free coastal climate well and come in dozens of shapes and colors. Belgard and similar lines are what we install most. They cost in the middle of the range and hold up to traffic and settling better than poured concrete because a single cracked paver can be swapped out.
- Clay brick pavers – Warmer look, heavier per square foot, and a higher price. They suit mid-century beach homes and traditional facades. The honest trade-off: clay chips more easily at the edges and needs a stiffer base to prevent heaving.
- Permeable pavers – Open-graded joints and a stone reservoir underneath let rain soak in rather than sheet off. On steep lots with drainage problems, this is often the smarter choice even though the base prep costs more.
- Polymeric vs. washed joint sand – Polymeric sand locks the joints and resists washout and weeds. Washed sand is cheaper but needs periodic topping off. On wind-exposed bluff lots, polymeric is usually worth the extra cost.
- Pattern and color – Herringbone and running bond are the standards. A border course in a contrasting color adds a finished look for a small upcharge in material and labor.
What Paver Driveways Cost in Malibu, CA
Expect $7,000 – $18,000 for a standard residential paver driveway in Malibu. That’s the working range we quote against, and it covers a drive in the 400 – 800 square foot range with typical site conditions.
| Line item | Range |
|---|---|
| Paver driveway installation (full job) | $7,000 – $18,000 |
| Driveway replacement (demo + rebuild) | $5,000 – $14,000 |
| Paver patio installation (if paired) | $3,500 – $11,000 |
| Driveway sealing (maintenance) | $250 – $700 |
Where a job lands in that range comes down to five variables: driveway size and shape, existing surface condition (a failed concrete slab costs more to demo and haul), base depth needed on a sloped or soft lot, paver grade and pattern complexity, and whether drainage or utility work is part of the scope.
A written estimate includes demo, haul-off, base material and compaction, edge restraint, pavers, joint sand and cleanup. What it typically does not include unless we’ve listed it: drainage correction, utility relocation, retaining walls at the drive edge, and permit fees where a permit is required. Upfront pricing means the number on the quote is the number you pay, and it’s backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Malibu Homes Do to This Job
Malibu driveways sit on some of the most demanding ground in the county. Much of this housing stock is on canyon or bluff lots where the drive is the only flat surface on the property, so the base has to shed water into a controlled swale or drain rather than off the edge into a slope. Salt spray and marine air break down fasteners and metal edging faster than inland, which is why we spec galvanized or stainless hardware and avoid bare steel edge restraint on exposed ocean-facing drives. The fire-prone chaparral interface and WUI codes mean noncombustible edging and clear access for emergency vehicles matter beyond aesthetics.
Coastal Commission jurisdiction, geotechnical slope reports and hillside grading rules can shape a driveway project before a shovel touches the ground, so we check permit scope early. Access is its own hurdle: many job sites in the canyons and along the bluff frontage can only be reached on winding grades, so we schedule material deliveries and concrete trucks accordingly. When a client is also building, homeowners often pair this with ADU Design & Permitting in Malibu or a Garage Conversion ADU in Malibu, and we coordinate the drive layout with the new structure’s access and utility runs.
Serving Malibu, CA – Our Local Coverage Area
We serve Malibu and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Malibu
Four to seven working days for a standard residential drive, from demo to final compaction. Larger drives, hillside base work or paired patio work can push it toward two weeks. Call (888) 427-1733 for a schedule based on your specific lot.
It depends on whether the work changes the driveway’s footprint, slope or drainage. Resurfacing over an existing drive in kind usually doesn’t require one; a new cut, a widened entrance or significant grading often does, and hillside lots can trigger geotechnical review. We scope the permit requirement before work starts.
Most jobs land between $7,000 and $18,000, with size, base prep, paver grade and drainage work driving the difference. Call (888) 427-1733 for an exact quote. Estimates are free.
Yes, when the hardware and base are spec’d for the coast. Galvanized or stainless fasteners and edge restraint resist corrosion, polymeric joint sand resists washout, and a properly compacted base keeps the field from shifting. That’s the difference between a drive that lasts decades and one that needs repair in eight years.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Calls are answered by a live person 24/7, and our technicians are background-checked and arrive in uniform. Call (888) 427-1733 to schedule your free estimate.
Get a Free Estimate on Paver Driveways in Malibu
If you’re pricing paver driveways in Malibu, the next step is a free on-site estimate. Call (888) 427-1733 and a live person picks up, any hour. We’ll walk the property, measure the drive, check the base and drainage, and hand you a written line-item quote with a fixed number. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. We serve Malibu and the surrounding canyons, and our Driveway & Pavers service covers everything from drive aprons to full replacements.
Written by the team at Groundwork Construction Co..