Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Agoura Hills: What the Job Really Takes
Cabinets & countertops in Agoura Hills is a two-phase project: cabinets go in first (7 – 14 working days including demolition), countertops are templated only after the boxes are set, then fabricated and installed on a second visit 10 – 15 days later. Most complete jobs here land between $14,000 and $45,000 depending on door style, box grade and stone choice. Call (888) 427-1733 for a free on-site estimate with a written line-item quote.
How a Cabinet and Countertop Job Actually Runs in Agoura Hills
Stone can’t be templated against a wall that’s still moving, and cabinet boxes can’t be hung straight on a floor that was never leveled. That sequence tension drives the whole schedule. Here’s how we run it.
Stage 1: Site check and laser measure (day 1, about 90 minutes)
We measure walls for square and plumb. In the 1960s – 80s split-levels around Morrison Ranch and Old Agoura this matters more than out-of-area crews expect, because settling and past remodels have usually left one or two walls out by more than an inch. You decide the door style, the box material and whether the layout stays put. This is also where we flag whether a permit is required for anything you’re moving.
Stage 2: Demolition and rough-in (days 2 – 4)
Old cabinets, countertops and the backsplash come out, and the drywall behind them gets cut back to inspect. If you’re changing the layout, this is the window for the electrician and plumber to move outlets, add a dedicated circuit for a new range, or relocate the sink line. Anything structural or plumbing-related gets inspected before we close the wall. You decide the final appliance and sink positions now, not later.
Stage 3: Cabinet installation and corner check (days 5 – 9)
Boxes get shimmed level, fastened, and checked against each other before any doors or drawers go on. Crown, filler and light rail go on last so the finished faces stay clean. You walk the run with us and confirm drawer bank heights and pull-out placement. For tall pantry and appliance panels this is the stage where a wrong swing direction costs a week, so we dry-fit the panels first.
Stage 4: Template, then fabrication (day 10, then 10 – 15 days off site)
The stone fabricator templates the installed cabinets with a physical pattern, not a drawing. You choose the edge profile, sink cutout and the overhang at each run. Quartz and granite are fabricated to that template, which is why we never quote a countertop from a plan. During the wait the room is useable but not finished.
Stage 5: Countertop install and final walkthrough (day 24 – 26, typically)
Slabs go in, seams get set in the least-visible spot, the undermount sink gets sealed, and we hang doors, attach hardware and adjust drawer fronts. Then we walk the whole job with you against the written scope. The one thing that can stretch a schedule is the countdown clock Agoura Hills requires before a demolition permit can be issued, so get the paperwork going early.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between, and What Each One Costs You
Most decision fatigue here comes from comparing things that aren’t comparable. Here’s the honest trade-off on each.
- Stock vs semi-custom vs full custom cabinets. Stock boxes are the cheapest and fastest but only come in fixed sizes, so gaps get filled with filler strips. Semi-custom (KraftMaid is the line we quote most often) gives you custom widths and door styles without custom pricing. Full custom is worth it on Old Agoura ranch plans where the kitchen opening is an unusual shape and nothing standard fits cleanly.
- Plywood vs particleboard boxes. Plywood holds screws better near sinks and in the foothill humidity swings between dry summers and wet winters. Particleboard is fine in dry interior runs and saves money on budget-driven jobs.
- Quartz vs granite vs porcelain slab. Quartz is non-porous and needs no sealing, which suits busy kitchens. Granite costs less per square foot but needs sealing every year or two. Porcelain slab handles heat best and comes in dramatic large formats, though it needs a fabricator comfortable cutting it.
- Slab thickness and edge profile. 2cm and 3cm slabs fit the same cabinets but the edge detail changes how thick the counter reads. Eased and bullnose edges are priced into most quotes; waterfall or mitered edges are fabricated labor and add cost.
- Sink and faucet hardware. Undermount sinks require the stone to be cut and polished around the opening, which the fabricator charges for. A farmhouse apron sink changes the cabinet run itself.
If you’re moving plumbing to add a prep sink or relocating the island, that’s part of a bigger scope than cabinets alone, so it often makes sense to plan it alongside a full Kitchen Remodeling in Agoura Hills project rather than retrofitting later.
What Cabinets & Countertops Cost in Agoura Hills, CA
The full range for cabinets & countertops in Agoura Hills runs $14,000 to $45,000. That breaks down by line item:
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
Four variables push a job toward the high end. Size: a small galley run costs less than a large open plan with a full island. Existing condition: out-of-plumb walls and settled floors add shimming and furring labor. Relocation: moving plumbing, electrical or a load-bearing wall triggers trades and permit scope. Material grade: a custom door profile in rift-cut oak costs multiples of a stock painted door. A written estimate lists cabinets, counters, installation labor, tear-out and disposal. It typically does not include appliance purchases, structural work uncovered after demolition, or flooring repairs under the old cabinet line.
See the difference
Before
After
Before
After
Before
AfterWhat Agoura Hills Homes Specifically Do to This Job
Agoura Hills sits in the Santa Monica Mountains’ foothills along the 101 corridor, and that geography changes the cabinet and countertop job in ways flat-valley work doesn’t see. Steep canyon lots mean a kitchen that backs onto an exterior grade wall or a retaining wall, and we often find moisture pushing into the back of base cabinets on the downhill side. Old Agoura’s horse properties on large rural lots add private access roads, equestrian structures nearby and occasional well or septic systems, so planning and delivery of stone slabs takes more coordination than a standard tract home. In Morrison Ranch split-levels and the older ranch homes, we regularly see base cabinets swollen from past leaks and counters that were set level to a floor that had settled, so we check plumb before ordering. Wildland-urban interface rules apply to new construction, and any wall or framing change that touches the exterior envelope gets drawn into that scope. If the job snowballs, we also do bathroom work such as Walk-In Showers & Shower Remodeling in Agoura Hills and Tub-to-Shower Conversion in Agoura Hills on the same visit schedule. To see the full area we cover, visit our Agoura Hills service-area page, and for the wider scope see our Kitchen Remodeling service.
Serving Agoura Hills, CA – Our Local Coverage Area
We serve Agoura Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Agoura Hills
A full kitchen cabinets & countertops job takes about 4 to 6 weeks from demolition to final walkthrough, and most of that is stone fabrication and permit review rather than on-site labor. Installation itself is roughly 7 to 14 working days, with the countertop template visit and the 10 to 15 day fabrication gap in the middle. Call (888) 427-1733 to get a schedule specific to your kitchen.
Like-for-like swap-out usually doesn’t need a permit, but moving plumbing, electrical or a wall does. Agoura Hills also requires a countdown period before a demolition permit can be issued, so plan for it in the schedule. We pull the permits and coordinate inspections as part of the job. Call (888) 427-1733 and we’ll tell you whether your scope needs one.
Yes, and it’s the most common version we do. Keeping the sink, range and walls in place avoids trades and permit scope and lands the job closer to the $14,000 end of the range. The layout constraints are real, though, so we confirm sink and appliance positions before ordering. Call (888) 427-1733 to schedule a free estimate.
Cabinets & countertops in Agoura Hills runs $14,000 to $45,000, with cabinet installation at $4,000 – $13,000 and countertops at $2,000 – $6,500. Custom door profiles, stone thickness and any layout change push toward the top of the range. Every quote comes with a written line-item breakdown and no change orders on fixed scope. Call (888) 427-1733 for an exact quote; estimates are free.
Our workmanship on cabinets & countertops is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Manufacturer warranties on KraftMaid cabinets and the stone itself run separately and we’ll explain those terms in writing. Call (888) 427-1733 with any warranty question.
Get a Free Cabinets & Countertops Estimate in Agoura Hills
Send us the room dimensions, a photo of the current setup and the door style you’re leaning toward, and we’ll bring a written line-item estimate to the free on-site visit. That visit is where the $14,000 – $45,000 range gets narrowed to your actual number, and where we confirm whether a permit is needed. Call (888) 427-1733 to schedule. Financing at 0% for 18 months is available.
Written by the team at Groundwork Construction Co.