Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Agoura Hills, CA: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Agoura Hills runs $9,000 – $28,000 for a full bathroom scope, while a curbless shower on its own lands in the $4,500 – $12,000 range, and most jobs finish in two to three weeks of working time. A simple shower replacement without moving plumbing runs $3,000 – $8,500 and often takes four to six days. Call (888) 427-1733 and we’ll put a real line-item number on your Agoura Hills shower after a free on-site look, because the slope your house sits on changes the waterproofing plan more than any tile choice does.
How We Build a Walk-In Shower Here, Stage by Stage
Bathroom work is plumbing, waterproofing and inspection before it’s tile. That order never changes, and skipping it is how showers leak into the room below. Here’s the sequence we run in Agoura Hills homes.
Stage 1: Site review and scope lock (day 1, half a day)
We open the wall behind the shower and look at what’s actually there: the drain type, the valve, the framing, and whether the subfloor is level or has a slope from settling. You decide two things this day: the shower footprint and whether the drain stays centered. Once the wall is open, a hidden problem like a soft subfloor or a corroded valve changes the scope, and we price it before we touch anything else.
Stage 2: Demo and rough-in (days 2 – 4)
Old tile, backer board and any failed waterproofing come out. We re-frame where needed, set the new drain and valve, and run the shower pan buildup. If the drain has to move, this is when the slab or floor framing gets opened. You sign off on the drain location and the rough-in placement before walls close up.
Stage 3: Waterproofing and inspection (days 4 – 6)
We build the sloped pan, coat it, and flood-test it before tile. Los Angeles County requires a plumbing permit for a drain or valve relocation, and the inspection happens here, not at the end. This is the stage homeowners underestimate. If the pan fails a flood test, we redo it. We don’t tile over it and hope.
Stage 4: Tile, glass and trim (days 7 – 15)
Wall tile, floor tile, niche and bench detailing, then glass templating. Frameless glass gets measured after tile is set, and fabricated glass takes about seven to ten business days, so this is the waiting stage. You pick tile, grout and glass thickness before this stage starts, not during it.
Stage 5: Fixtures and closeout (days 15 – 18)
Showerhead, valves, drain cover, door hardware, caulk lines, and a final walkthrough with you in the room. We run water through the system and check the pan for ponding. Anything that fails gets fixed before we call the job done, and our 730-Day Done Right Promise covers the workmanship after closeout.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the variance in a shower job is a handful of choices, and each one trades cost against how it holds up in Agoura Hills water and heat.
- Curbless vs. low-curb pan. A curbless shower needs recessed framing or a shallow sloped pan, and it suits aging-in-place plans best. A low-curb pan costs less and is easier to waterproof, but it’s a small step.
- Tile over cement board vs. a bonded sheet waterproofing system. Sheet systems like Schluter Kerdi are a premium choice and worth it on a curbless build, where the pan geometry is fussy.
- Porcelain vs. natural stone. Porcelain runs lower and tolerates the hard local water better. Travertine or marble looks richer but needs sealing and shows etch marks.
- Frameless glass vs. a framed door or a half-wall. Frameless glass is the cleanest look and the pricier choice; a half-wall or fixed panel can lower glass cost.
- Linear drain vs. center drain. A linear drain lets you use larger-format tile on the floor with fewer grout lines, but it costs more to set and the pan is more complex.
Fixtures matter too. Kohler and similar brands are worth the small step up for valve cartridges that don’t fail in five years, though a builder-grade valve does the job if the budget is tight. The glass and waterproofing are the places to spend; tile can be gorgeous at a mid price point.
What Walk-In Showers & Shower Remodeling Costs in Agoura Hills, CA
Our lead range is $9,000 – $28,000 for a walk-in shower within a fuller bathroom scope, and $4,500 – $12,000 for a standalone walk-in install. Here’s the line-item breakdown so you can see what the number is made of:
| Item | Typical range |
|---|---|
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement (no plumbing moves) | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Vanity installation | $800 – $3,000 |
| Full bathroom remodel (shower + rest) | $9,000 – $28,000 |
Five things move the number:
- Shower size. A 36×48 stall is at the low end; a 5×6 walk-in with a bench leaps up.
- Drain and valve relocation. Moving a drain on a slab costs several hundred to a few thousand dollars more than keeping it in place.
- Waterproofing system. A bonded sheet system adds to material and labor but protects the waterproofing detail better.
- Tile and glass grade. Porcelain with a frameless door sits mid-range; large-format stone and heavy glass push high.
- Hidden conditions. A failed pan, rot in the framing behind a wall, or a slab that needs leveling can add cost once the wall is open.
Our estimate is upfront pricing, no surprises, with a written line-item quote and the number locked before we start. We don’t do change orders mid-job without your signoff.
See the difference
Before
After
Before
After
Before
AfterWhat Agoura Hills Homes Specifically Do to This Job
Agoura Hills sits in the Santa Monica Mountains’ foothills along the 101, which changes a shower job in ways flat-valley crews don’t have to plan for. Large sloped lots in Old Agoura and Morrison Ranch mean framing sits above grade, so the shower subfloor often needs leveling before the pan goes in. Winter storm runoff on steep terrain also matters: a shower pan that drains to the wrong side can pool, and on a canyon property the moisture has somewhere to go.
Older ranch and split-level homes in the 91301 ZIP often carry builder-era plumbing that has reached the end of its life, and we open the wall expecting to find galvanized lines or a valve that hasn’t moved in thirty years. That’s a scope decision, not a surprise. Newer foothill custom homes are different: they’re built to Chapter 7A wildland-urban interface standards on the fire side, and the shower waterproofing and ventilation details are just as important because they’re sealed tight. Permits here are pulled through Los Angeles County and the city, and we handle that filing for you. Old Agoura’s rural lots also mean private access drives and septic systems, which we factor into the plan before the first crew shows up.
Serving Agoura Hills, CA – Our Local Coverage Area
We serve Agoura Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Agoura Hills
A standalone walk-in shower takes 7 – 12 working days; a shower within a full bathroom scope runs two to three weeks. The timeline is longer if we relocate the drain or the glass needs custom fabrication, and we schedule glass ordering in week one so it isn’t the bottleneck. Call (888) 427-1733 for a timeline on your specific shower.
You need a permit if the drain or valve moves; a straight tile-and-pan swap with no plumbing changes may not. We pull the permit and meet the inspection on your behalf, and we don’t start demo until the permit is filed. Call (888) 427-1733 and we’ll tell you which category your job falls into.
Yes, if the existing drain stays centered, which is the more affordable path at $3,000 – $8,500. Keeping the drain in place lets us use a standard pan and skip the slab work; the trade-off is a smaller footprint or a slightly different glass line. Call (888) 427-1733 and we’ll walk the shower with you to see which way it goes.
A standalone walk-in shower runs $4,500 – $12,000, and within a fuller bathroom scope the project lands at $9,000 – $28,000. The high end reflects drain relocation, bonded waterproofing, large-format stone and frameless glass. Call (888) 427-1733 for an exact quote; estimates are free.
Every shower we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the pan, waterproofing, tile and glass install for two years, not a shorter conditional period.
Get a Free Estimate on Your Agoura Hills Shower
We’ll come out, open the wall if needed, and hand you a written line-item estimate for Walk-In Showers & Shower Remodeling in Agoura Hills with the price locked. The call takes a few minutes: we ask about the shower’s size and age, whether the drain stays put, and when you’d like work to start. If the shower is part of a wider project, we can scope it alongside Bathroom Remodeling in Agoura Hills. Call (888) 427-1733, or browse our Bathroom Remodeling service to see what else we do, and check our Agoura Hills service page. Homeowners planning exterior work often pair this with Roof Replacement & Installation in Agoura Hills or Metal Roofing in Agoura Hills, and we can quote both on one visit.
Written by the team at Groundwork Construction Co. of Los Angeles.