Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Agoura Hills: What It Costs and How Long It Takes
Backsplash, Tile & Flooring work in Agoura Hills usually runs $14,000 – $45,000 for a full kitchen-and-adjacent-flooring scope, or $800 – $2,500 for a backsplash on its own, with most single-room tile jobs finished in 3 – 7 working days once materials are on site. A straight swap of backsplash and a small floor area can be done in two or three days. Call (888) 427-1733 for a free on-site estimate and a written line-item quote before anything gets demoed.
How We Run a Backsplash, Tile & Flooring Job, Start to Finish
The sequence matters more than the tile choice, because in Agoura Hills hillside homes the substrate and the transitions are where jobs go wrong. Here’s the actual rhythm of a project, stage by stage.
Stage 1: Site evaluation and layout (day 1, half a day)
We walk the kitchen and any adjoining floor area, check what’s under the existing tile, and confirm whether the subfloor is flat or has a slope issue. You decide the tile you want and the layout pattern here, because backsplash layout (running bond, stacked, herringbone, full-height slab) changes the material quantity and the labor hours. We measure and lock quantities so nothing gets re-ordered mid-job.
Stage 2: Demo and substrate prep (days 1 – 2)
Old backsplash and tile come off, drywall gets patched, and we set the substrate. This is the stage that surprises homeowners: if the drywall behind a 1980s tract backsplash crumbles, we replace it before setting a single tile. Floor areas get self-leveler or a cement backer board depending on what’s underneath. No tile goes down on a substrate we don’t trust.
Stage 3: Tile setting and layout (days 2 – 4)
Floor tile goes first, then backsplash, so we’re not walking over fresh work. We set with a notched trowel and spacers, check lippage as we go, and cut around outlets and fixtures. You confirm the grout color at this stage, not later.
Stage 4: Grout, seal, and cure (days 4 – 5)
Grout goes in after the thinset cures. Natural stone gets sealed; porcelain usually doesn’t need it. We keep foot traffic off the floor for a set window and tell you exactly when it’s safe to walk on.
Stage 5: Final walkthrough and sign-off (day 5 – 7)
We go over every grout line, check the transitions to adjoining flooring, and confirm the layout matches the plan. Anything that isn’t right gets fixed before we call the job done, and the work is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make Between
Most of the decisions in a tile job are made in a single afternoon, and each one trades cost against durability and upkeep. Here’s the honest comparison for what we install in Agoura Hills homes.
- Ceramic vs. porcelain floor tile. Ceramic is cheaper and easier to cut; porcelain is denser, handles moisture and temperature swings better, and holds up in a kitchen that sees heavy traffic. For a kitchen floor, porcelain is usually the right call.
- Backsplash material. Glazed ceramic subway tile keeps material cost low and installs fast. Glass and stone mosaics cost more per square foot and need more careful setting. A slab backsplash (quartz or stone matching the counter) is the premium option and means fewer grout lines to clean.
- Tile size. Large-format tile (12×24 and up) means fewer grout lines but needs a flatter substrate and more precise cuts. Small mosaics forgive a slightly uneven wall and cost more in labor per square foot.
- Grout. Cementitious grout is standard; epoxy grout resists staining better and costs more. In a kitchen that gets real use, epoxy is often worth it.
- Trim and transitions. Schluter-style metal profiles, bullnose tile, or wood transitions at doorways. This is the detail that separates a finished job from a patchwork one.
Where it fits the design, we’ll spec a Sakrete patching compound under a floor transition, but the exact product depends on the substrate we find.
What Backsplash, Tile & Flooring Costs in Agoura Hills, CA
Expect $14,000 – $45,000 for a combined kitchen backsplash and larger flooring scope, and $800 – $2,500 for a backsplash alone. A single room of floor tile lands in the middle of that. Here’s what moves the number:
- Square footage. A 30-square-foot backsplash is a short job; 500 square feet of kitchen and laundry floor is a week.
- Substrate condition. Crumbling drywall, an out-of-level subfloor, or water damage behind old tile adds demo and prep hours.
- Material grade. Porcelain and glass cost more than basic ceramic; a slab backsplash costs more than any tile.
- Layout complexity. Herringbone and other pattern layouts take more cutting and more time than a straight running bond.
- Moving anything. Relocating an outlet, a gas line, or a fixture changes the scope and may pull in a permit.
Your written estimate lists demo, prep, materials, setting, grout, and cleanup as separate line items. What it won’t include is a surprise change order the day work starts: upfront pricing means the number you see is the number you pay. If finishing touches like a new vanity or fixtures are on your list, homeowners often pair this with Vanities, Tile & Fixtures in Agoura Hills and handle both in one visit.
See the difference
Before
After
Before
After
Before
AfterWhat Agoura Hills Homes Specifically Do to This Job
Agoura Hills sits in the Santa Monica Mountains’ foothills along the 101 corridor, where steep canyon lots and hillside grading standards turn a tile job into a substrate job. In the 1960s – 80s ranch and split-level homes across Old Agoura and Morrison Ranch, we regularly find original drywall behind backsplashes that fails the moment you pull the tile off, and floors that were never leveled because the house itself is on a slope. Canyon properties on large, sloped lots bring their own issues: winter storm runoff finds its way under exterior doors, and that moisture shows up as cracked grout and lifted floor tile. Old Agoura’s horse properties mean private access roads and sometimes awkward delivery logistics, so we plan material drops around that. None of this is cosmetic; it’s the reason we don’t set tile on a substrate we haven’t inspected. We cover all of Agoura Hills, including the 91301 and 91376 ZIP codes, and the local realities we’ve seen on other projects carry straight over to your tile job. Where tile work is part of a larger scope, it usually folds into Kitchen Remodeling in Agoura Hills.
Serving Agoura Hills, CA – Our Local Coverage Area
We serve Agoura Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Backsplash, Tile & Flooring in Agoura Hills
A backsplash alone takes about 2 – 3 working days, and a combined backsplash and floor tile scope usually takes 5 – 7 days once materials are on site. Hillside homes with substrate damage can add a day or two to the prep stage. Call (888) 427-1733 and we’ll give you a real timeline for your project.
Cosmetic tile and backsplash replacement typically doesn’t require a permit, but relocating plumbing, gas, or electrical to accommodate the layout does. Hillside and wildfire-interface properties can bring additional requirements depending on the scope. We’ll tell you up front what needs a permit before any work starts. Call (888) 427-1733 to talk through your project.
Yes, and most backsplash and floor tile jobs don’t require moving anything. We tile around existing outlets and fixtures and keep the layout where it is. If you want a fixture relocated, that changes the scope and we’ll quote it separately. Call (888) 427-1733 for a free estimate.
Backsplash work runs $800 – $2,500, and a combined backsplash and larger flooring scope runs $14,000 – $45,000. Substrate condition, material grade, and layout complexity are the biggest drivers. Call (888) 427-1733 for a free estimate and a written line-item quote; the price you see is the price you pay.
Every tile and backsplash job is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If something isn’t right, we come back and make it right. Call (888) 427-1733 to schedule your free estimate.
Get a Free Backsplash, Tile & Flooring Estimate in Agoura Hills
Call (888) 427-1733 to schedule a free on-site estimate for backsplash, tile & flooring in Agoura Hills. We’ll measure the space, check the substrate, and hand you a written line-item quote with the price locked in. A live person answers the line 24/7, so you won’t hit a voicemail. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.