Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Agoura Hills: What It Costs and How Long It Takes
Replacing a bathroom vanity, floor and wall tile, and the fixtures that go with them runs $9,000 – $28,000 in Agoura Hills, with most single-bathroom jobs landing in the middle of that range. Plan on two to four weeks of working time once materials are on site: three to five days for demo and prep, a week or so for tile and setting, then vanity, fixtures and trim. Call (888) 427-1733 to schedule a free on-site estimate.
How We Run a Vanity, Tile and Fixture Job Here
Tile and fixture work fails or succeeds on the prep, and prep is where most of the calendar goes. Here’s the sequence we actually follow.
Stage 1: Measure and layout, days 1 – 2. We template the vanity against the actual wall, because in split-level homes off Kanan Road and older ranch tracts, no two walls are square and a 60-inch vanity can foul a doorway swing you didn’t expect. You decide vanity width and depth, tile layout (straight-set versus offset or herringbone), and where the shower valve and body sprays land. Herringbone adds 15 – 20% to tile-setting labor for the extra cuts alone.
Stage 2: Demo and rough-in, days 2 – 4. Out comes the old vanity, toilet, tile and backer. If we’re relocating the sink or moving a valve, that’s where the plumbing and electrical rough-in happens. A licensed plumber and electrician handle those lines; if the drain or supply stays put, this is a half-day instead of two. A building inspection is triggered only when we move plumbing or electrical in the wall, or change the footprint.
Stage 3: Waterproofing, days 4 – 5. Cement backer board on floors, a liquid-applied or sheet membrane in the wet zone, and a flood test on shower pans where one applies. Nobody sees this layer. It’s the whole reason a tile floor is still solid ten years later.
Stage 4: Tile setting and grout, days 5 – 9. Floor first, then walls, then grout and seal. Large-format porcelain (24×48) looks clean and grouts faster but needs a flatter substrate and a two-person lift. Mosaic, small hex or penny rounds cost more to set because there are so many more pieces and joints.
Stage 5: Vanity, top, fixtures and trim, days 9 – 14. Cabinet set and leveled, countertop templated (a fabricated stone top adds 5 – 10 days of lead time on its own), faucet, drain, mirror, lighting and accessories last. You do a walkthrough with us before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
- Vanity style: a freestanding furniture-style vanity is the easiest swap and often the fastest, since it drops into an existing alcove. A built-in or floating vanity means blocking in the wall and usually a plumbing change, which pushes both cost and schedule.
- Vanity top: cultured marble is the value pick and holds up fine; quartz is the durable middle. Cambria and similar quartz brands run higher but resist staining and etching better than natural stone. A stone top means a template and a lead time; a pre-fab top ships in a day.
- Tile body: porcelain is denser and more water-resistant than ceramic and is our default for floors. Natural stone (travertine, marble) is beautiful and needs sealing every year or two in a wet room.
- Fixtures: Kohler and similar brands sit at the mid-to-premium tier and carry parts availability that cheaper imports don’t. A $90 faucet and a $300 faucet look similar on day one; they don’t feel similar in year six.
- Grout and sealant: epoxy grout costs more up front and resists staining far better than cementitious grout in a shower.
What Vanities, Tile & Fixtures Cost in Agoura Hills, CA
The full range for this scope is $9,000 – $28,000 in Agoura Hills. Here’s the line-item picture:
| Item | Typical range |
|---|---|
| Bathroom vanity installation | $800 – $3,000 |
| Floor and wall tile, labor and material | $3,000 – $9,000 |
| Fixture package (faucet, shower trim, drain) | $600 – $2,500 |
| Plumbing or electrical relocation | $800 – $3,500 |
| Waterproofing and substrate prep | $700 – $2,000 |
Five things push a job toward the high end: square footage (a 40 sq ft hall bath versus a 120 sq ft primary), whether we relocate plumbing or electrical, tile grade and pattern complexity, vanity and top material, and permit scope when the footprint or rough-in changes. A straightforward vanity swap with fresh floor tile can be a $9,000 – $12,000 job. A full primary bath with new layout, large-format porcelain and quartz lands near the $28,000 ceiling.
Our written estimate is line-item, with no change orders after the fact. That’s the upfront-pricing commitment, and it’s part of why our projects are covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. Calls are answered by a live person around the clock.
See the difference
Before
After
Before
After
Before
AfterWhat Agoura Hills Homes Do to This Job
Housing stock here changes the work. A lot of the homes we touch are 1960s – 80s ranch and split-level properties in Morrison Ranch and Old Agoura, and the walls in those are rarely plumb. Old Agoura’s larger rural lots are a different problem entirely: private access roads and wells mean a delivery truck can’t always reach the door, so we stage materials differently. Moving a vanity through a narrow canyon-lot hallway is a scheduling question, not a shopping one.
The foothill setting along the 101 corridor matters too. Steep lots and winter runoff on the slope mean moisture control under a tile floor has to be handled properly, not skimped. And because this is a high fire-severity zone under Chapter 7A wildland-urban interface standards, exterior-facing work carries requirements that flat-valley jobs a few miles east don’t face. We pull the permits, schedule the inspections, and handle the paperwork. If you’re also updating the roof, homeowners often pair this with Tile Roofing in Agoura Hills or Specialty Roofing in Agoura Hills while we’re already on site.
Agoura Hills work like this is often the final phase of a larger project. If it’s part of a full Bathroom Remodeling in Agoura Hills, we scope it there. You can also start from our Bathroom Remodeling service page, or check what we cover on the Agoura Hills service-area page. We serve both ZIP codes here, 91376 and 91301.
Serving Agoura Hills, CA – Our Local Coverage Area
We serve Agoura Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vanities, Tile & Fixtures in Agoura Hills
Most Agoura Hills jobs take two to four weeks of working time, and stone countertop lead times can add another week. The demo and tile phases are fixed; the vanity and top are what stretch the finish. Call (888) 427-1733 to get a firm schedule for your project.
You need a permit if we move plumbing, electrical or the fixture layout; a straight swap of a vanity, tile and fixtures in the same location generally doesn’t trigger one. We pull the permits and schedule inspections when they’re required. Call (888) 427-1733 and we’ll tell you which side of that line your job falls on.
Yes. A vanity, tile and fixture refresh in the same footprint skips the rough-in stage and often runs $9,000 – $12,000. Keeping the drain and supply lines in place is the single biggest way to hold the budget down.
Expect $9,000 – $28,000, depending on square footage, material grade, and whether we relocate plumbing or electrical. Call (888) 427-1733 for an exact written line-item estimate, free of charge.
Every job is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s over the standard one-year warranty most contractors offer.
Get a Free Estimate for Vanities, Tile & Fixtures in Agoura Hills
We start with a free on-site visit, measure the room, and talk through what you want and what it costs. You leave with a written line-item estimate and a realistic schedule, no pressure and no vague ballpark. Call (888) 427-1733 to book it, and a live person will answer.
Written by the team at Groundwork Construction Co.