Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Agoura Hills, CA: What It Costs and How the Build Goes
A wood fence in Agoura Hills typically runs $3,500 to $9,000, and most builds finish in three to five working days. That number covers posts, rails, boards, concrete footings set deep enough for hillside soil, and cleanup. It does not cover brush clearance, retaining work, or slope grading, which is where canyon-lot projects here separate from a flat-lot job a few miles east. Call (888) 427-1733 and we’ll walk your lot, talk through materials, and put a line-item number in front of you.
The Build, Step by Step: What Happens on Day One vs. Day Five
Wood fencing is a sequence job. Miss a step and the fence leans or rots before the warranty feels useful. Here’s exactly how we run it.
Day 1 – Site walk and layout. We confirm the property line against your plat or survey, mark post centers with stakes and string, and check for buried irrigation, gas stubs, or low-voltage landscape wire running the fence line. On sloped Agoura Hills lots this is also where we decide step-down versus racked panels. You approve the line before a shovel touches dirt.
Day 1-2 – Demo and prep. Old fencing comes down, posts pull, and concrete footings get busted out and hauled. We dig new post holes to 24-36 inches depending on soil and frost depth requirements. In the decomposed granite common on canyon properties, holes get wider and footings get more concrete. You decide gate placement here, because it changes the post spacing.
Day 2-3 – Posts and footings. We set posts plumb, brace them, and pour footings. The concrete cures overnight minimum before boards go on. This is the one stage that can’t be rushed on a hillside build, and it’s why a cheap fence fails in two seasons.
Day 3-4 – Rails, boards, and gates. Top and bottom rails go on, then dog-ear, board-on-board, or shadowbox boards depending on what you picked. Gates get framed and hung with proper hardware and a latch. Fence height and board spacing get a final check against your HOA or city requirements.
Day 5 – Finish and walkthrough. We seal or stain if that’s in scope, clean up debris, haul the old fence away, and walk the finished line with you. You sign off against the original estimate. If anything’s off, we fix it before we leave – and the 730-Day Done Right Promise covers workmanship well beyond that walkthrough.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Change Your Fence: Materials, Heights, and Styles
Most of the real decisions happen before a single post goes in. Here’s the honest trade-off on each:
- Cedar vs. pressure-treated pine. Cedar costs more up front but resists rot and insects naturally, and it takes stain beautifully. PT pine is cheaper but needs sealing within the first year and re-sealing every few. On Agoura Hills lots with any moisture retention, cedar earns its price over the fence’s life.
- Dog-ear vs. board-on-board vs. shadowbox. Dog-ear is the standard privacy build – clean, affordable, classic. Board-on-board overlaps for extra privacy and wind deflection, which matters on ridge lots. Shadowbox alternates sides for equal privacy and better airflow – a good fit for canyon properties where you want breeze but not eyes.
- Height. Six feet is the residential standard. Some Agoura Hills properties with HOA rules cap at that; others allow up to eight feet with approval. We check before we build.
- Racked vs. stepped panels. Racked panels follow the slope line; stepped panels stay level and drop in sections. Stepped handles steep grades better and looks sharper on hillside lots.
- Finishes. Clear sealer preserves the wood look; semi-transparent stain adds color and UV protection; solid stain gives the most color uniformity and hides flaws. Every finish needs reapplication – budget for it.
- Gate hardware. Self-closing hinges, drop rods, and metal frames where the gate spans a wide opening. Cheap hardware is the number one call-back we see on wood fences.
What a Wood Fence Costs in Agoura Hills, CA
Our typical wood fence range for Agoura Hills is $3,500 to $9,000, with the final number driven by linear footage, material grade, terrain, and what we find underground. A standard 100-150 linear foot cedar privacy fence on a flat lot sits near the bottom. A 200-foot board-on-board build on a sloped canyon property with existing concrete footings to remove pushes toward the top. Here’s what moves it:
- Linear footage. The single biggest factor. Rough rule: material and labor scale almost linearly with the length of the run.
- Fence height and style. Board-on-board and shadowbox run higher than dog-ear at the same footage.
- Existing fence removal. Old posts and concrete footings add demo and hauling cost.
- Grade and slope. Steep lots require stepped panels, deeper footings, and often retaining work – a real cost driver specific to canyon properties.
- Permit scope. If your fence needs a permit (height above six feet, or where your HOA or the city requires it), we handle the application and inspection.
A written estimate from us lists each line – posts, rails, boards, footings, demo, gates, finish – so you can see what’s driving the price. It also states what isn’t included, so there’s no surprise line later. The number you see is the number you pay. 0% financing for 18 months is available, along with $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Agoura Hills Homes Do to This Job
Agoura Hills isn’t a flat suburban build. The city sits in the Santa Monica Mountains foothills along the 101 corridor, and that geography rewrites the fencing playbook. Nearly every project here starts with grading and drainage decisions before the first post goes in. Canyon lots in ZIP codes 91301 and 91376 often need stepped panels, deeper footings, and drainage diversion so winter storm runoff doesn’t undermine the base. On brush-adjacent lots, fence placement has to respect brush-clearance requirements tied to the high fire-severity zone – wood fencing close to dry brush needs to be planned around defensible space, not just dropped on the property line.
The housing stock compounds this. Old Agoura’s horse properties sit on large rural lots with private access roads, equestrian structures, and septic or well systems – fencing here has to clear buried lines and route around paddocks and barns, not just run a clean line between two suburban yards. Morrison Ranch and older ranch tracts carry 1960s-80s construction where original fencing is often at end of life and posts have settled into aging footings. Foothill custom homes on slopes need the stepped and racked work that flat-lot crews don’t see. The failure mode we see most in Agoura Hills: a fence built on shallow footings that leaned off plumb after the first wet winter. We build to the slope, not to the address. This is also a common upgrade alongside Paver Driveways in Agoura Hills when a homeowner is reworking the front yard at the same time.
Serving Agoura Hills, CA – Our Local Coverage Area
We serve Agoura Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in Agoura Hills
Most wood fence builds in Agoura Hills take three to five working days for 100 to 200 linear feet, weather permitting. Hillside lots, extra demo, and deep footings push it toward the five-day end; flat lots with simple runs come in faster. Call (888) 427-1733 for a timeline on your specific property.
Often, yes – particularly for fences over six feet, or where your HOA or the city requires approval based on lot, slope, or fire-zone conditions. We check the 91301 and 91376 requirements and pull any needed permits as part of the job, and we coordinate the inspection. Call for a quick read on what your property needs.
Usually, yes. We locate irrigation, gas, and low-voltage lines on the layout day and route posts around them. On Old Agoura properties with well or septic systems, we plan that path before digging. When a line is genuinely in the way, we tell you before demo and price the reroute in writing.
Typical range is $3,500 to $9,000, driven mostly by linear footage, material (cedar vs. pressure-treated), height and style, slope, and demo of the old fence. Cedar privacy runs higher than PT pine; stepped panels on a canyon lot run higher than a flat run. Call (888) 427-1733 for an exact quote – estimates are free and line-itemed.
Every wood fence we build is covered by our 730-Day Done Right Promise – if workmanship on posts, footings, or framing fails within that window, we make it right. Manufacturer coverage on materials and finishes applies separately. Call (888) 427-1733 and we’ll spell out exactly what’s covered on your build.
Get a Free Wood Fence Estimate in Agoura Hills
Call (888) 427-1733 to schedule a free on-site estimate for a wood fence in Agoura Hills. We walk the line with you, check the slope and buried lines, and hand you a written, line-itemed price – no pressure, no guesswork. If the job is part of a larger Fence Installation in Agoura Hills project, we’ll fold the wood fence into that scope; if you want to pair it with Concrete Driveways & Concrete Work in Agoura Hills, we’ll coordinate the stages. Our Fence Installation service covers the full range of fence builds, and we’re proud to serve the whole Agoura Hills area. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.