Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Agoura Hills, CA: What to Expect
Concrete driveway installation in Agoura Hills runs $4,500 – $12,000, and a full replacement typically lands between $5,000 and $14,000. Most jobs take 3 to 5 working days from demo to the day you can park on the slab, longer if the grade needs correcting before we pour. On a canyon lot off the 101, the slope and drainage work often decides the schedule more than the concrete itself. Call (888) 427-1733 for a free on-site estimate with real numbers for your property.
How Concrete Driveways & Concrete Work Come Together, Stage by Stage
Concrete work rewards planning and punishes shortcuts. Here’s the sequence we follow in Agoura Hills, and what you’re deciding at each point.
Stage 1: Site walk and layout (day 1)
We measure the drive, check existing grades with a level or laser, and look at where water runs off during a storm. On hillside lots, this is where we find out whether the caliche or decomposed granite under the old surface will support a pour without over-excavation. You decide the footprint, the width at the street cut, and whether the aprons flare or stay parallel. That conversation usually takes under two hours on site.
Stage 2: Demo and haul-off (day 1 – 2)
Breaking out the old slab, footings, and any abandoned post bases typically takes a half day to a full day for a two-car drive. Hauling happens the same day, and it matters more here than in flat suburbs: narrow canyon driveways and shared private roads in areas like Old Agoura limit how large a truck can reach the work. We stage the dumpster and the skid steer accordingly. You confirm the haul route and any gate codes.
Stage 3: Grading, base, and drainage (day 2 – 3)
We excavate to depth, compact 4 to 6 inches of Class II base in lifts, and run the slope so the finished surface sheds water away from the house and toward the street or a drainage swale. On sloped properties we may add a channel drain or a dry well, which is a decision you’ll make with a cost number in hand. Rebar goes on chairs at 18 to 24 inches on center for a standard residential drive.
Stage 4: Forms, inspection, and pour (day 3 – 4)
Forms set the exact finished shape and elevation, and if a permit is required, the inspection happens before the pour. The pour itself takes a few hours, but the finishing, joint cutting, and curing compound application carry into the afternoon. You decide joint pattern and finish during this stage. Then nothing drives on it until we say so.
Stage 5: Cure and walkthrough (day 4 through day 7+)
Concrete reaches enough strength for foot traffic in about 24 to 48 hours and vehicle traffic in roughly 7 days, though some mixes run longer. We walk the finished surface with you, confirm drainage is running the right way, and hand over care instructions for the first month. Full cure takes about 28 days, which is worth knowing before you park anything heavy on it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Concrete Driveways & Concrete Work
Most of the decisions on a concrete drive come down to finish, thickness, and reinforcement. Each has a real trade-off.
- Standard broom finish: The most common choice, and the least expensive. It grips well when wet and hides tire marks better than smooth finishes. It won’t win a design award, but it holds up.
- Exposed aggregate: Rinsed to show the stone beneath the surface. Good traction and a bit more visual interest, at a modest premium and with more finishing labor.
- Stamped concrete: Pressed to mimic stone or brick. Attractive, but the texture can get slick in wet conditions and the pattern needs sealing on a schedule to stay sharp. This one has its own dedicated page if you’re leaning that direction.
- Standard 4-inch slab vs. 5 to 6 inches: A 4-inch slab suits a passenger car. If you park a truck, an RV, or a heavy trailer, the extra thickness prevents cracking and is worth the added cost. Canyon properties often have heavier-than-average vehicles on them.
- Rebar vs. mesh: Rebar adds tensile strength and is the better call on our sloped pours. Mesh is cheaper but deforms easily during the pour.
- Drainage additions: A channel drain or a French drain along the uphill edge costs extra but solves a runoff problem before it becomes an erosion problem. On a hillside lot, this is often the smartest money you’ll spend.
If the driveway is part of a wider exterior plan, it’s worth looking at our Driveway & Pavers service to see how a hardscape approach might tie in.
What Concrete Driveways & Concrete Work Costs in Agoura Hills, CA
Plan on $4,500 – $12,000 for a standard concrete driveway, $5,000 – $14,000 for a full replacement, and $250 – $700 for sealing if you want to protect a finished or restored slab. Those ranges are real, but four or five variables swing the number hard.
- Size and access: A wider, longer drive takes more concrete and more base. On tight canyon lots, limited access for heavy equipment pushes labor up.
- Existing condition: A cracked slab with settling or old footings underneath means more demo and more excavation. If the subgrade is bad, base material and compaction costs go up.
- Grade and drainage: Steep hillside drives need retaining or drainage work before a pour, which alone can clear the top of the range. Flat, ready pads sit at the bottom.
- Material grade and finish: Broom finish is the budget option. Exposed aggregate and thicker slabs with rebar sit at the high end.
- Permit scope: Most residential driveway pours don’t require a permit, but grading or retaining work on a slope often does, and that adds time and cost.
A written estimate from us breaks out demo, haul-off, base, rebar, concrete, finish, and drainage line by line. What it typically won’t include: landscape restoration after hauling, irrigation lines you might be relocating, or any grading that wasn’t visible before demo.
See the difference
Before
After
Before
After
Before
AfterWhat Agoura Hills Homes Specifically Do to This Job
Agoura Hills sits in the foothills of the Santa Monica Mountains along the 101, and that geography changes concrete work in ways you won’t see on a flat suburban drive in the Valley. Steep canyon lots mean grading and drainage are part of almost every project before the first form goes down. The brush-clearance and wildfire-interface rules that shape the area apply broadly, so we plan staging and equipment around those realities. Winter storm runoff on a slope is a real concern, which is why we pay close attention to how the finished surface sheds water.
The housing stock shapes the work too. Old Agoura’s horse properties on large rural lots mean private access roads, equestrian structures, and septic or well systems, so a driveway pour there may involve coordinating around a septic line or a gate that heavy equipment has to clear. In Morrison Ranch and similar 1960s-80s tracts, we’re often replacing original drives that have settled and cracked over decades. Whether you’re in the 91301 or 91376 ZIP, we cover the area as part of our Agoura Hills service. If you’re planning bigger changes, homeowners often pair a driveway rebuild with a Garage Conversion ADU in Agoura Hills or a New Detached ADU in Agoura Hills, since access and grading get handled in one pass.
Serving Agoura Hills, CA – Our Local Coverage Area
We serve Agoura Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Agoura Hills
A typical residential pour takes 3 to 5 working days from demo to finished surface, plus about 7 days before you can park on it. Sloped canyon lots with grading or drainage work can stretch to 7 to 10 days. Call (888) 427-1733 for a schedule based on your property.
A standard driveway pour usually doesn’t require a permit, but grading, retaining walls, or significant earthwork on a slope often does. We check the requirements for your address before we quote. Call us and we’ll tell you what applies to your lot.
No, when the scope we quoted is the scope we find. If demo reveals a problem that wasn’t visible, like a failed subgrade or an unknown drain line, we stop and give you a written change order before proceeding. Call (888) 427-1733 for an upfront estimate.
Sometimes, if the old slab is structurally sound and the added height won’t interfere with drainage or the garage threshold. Cracked, settling, or oil-saturated slabs need to come out. Call us to assess whether an overlay is viable on your Agoura Hills drive.
Every concrete driveway and concrete work project is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. Concrete is a long-horizon material and the warranty should match. Call (888) 427-1733 to get started.
Get a Free Estimate for Concrete Driveways & Concrete Work in Agoura Hills
Call (888) 427-1733 and a live person picks up, any hour, any day. We’ll schedule a free on-site estimate, walk your property, check grade and access, and hand you a written line-item quote with upfront pricing. No sales pitch, no surprise numbers later. If you’re weighing this against a full exterior rebuild, our Driveway & Pavers in Agoura Hills page covers the wider scope.
Written by the team at Groundwork Construction Co..