Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Full Bathroom Remodeling in Culver City, CA: Scope, Timeline and Cost
Full bathroom remodeling in Culver City, CA runs $9,000 – $28,000 for most homes, with the average project landing near $16,000 – $21,000 once tile, fixtures and permits are counted. A typical full remodel takes 3 – 5 weeks of working time, longer in the 1920s – 40s Spanish bungalows where framing and plumbing surprises show up behind the walls. Call (888) 427-1733 for a free on-site estimate and a written, line-item scope before anyone swings a hammer.
How a Full Bathroom Remodel Actually Runs, Stage by Stage
Most contractors describe a full bathroom remodel as a blur. Here’s the real sequence, with the decisions you’ll be making at each point.
Stage 1: Teardown and discovery (days 1 – 3)
We protect the hallway, shut off water, and demo the vanity, toilet, tub or shower, tile and drywall back to studs. This is when we find out what the room actually is. In Culver City homes, we open a wall and find old galvanized supply lines one step from failing, or original wood lath under the drywall. The homeowner decides at this point whether the scope stays as written or we price a change order for what’s behind the wall. Photos go to you the same day.
Stage 2: Rough-in for plumbing, electrical, ventilation (days 3 – 6)
Licensed plumbing and electrical are reworked to the new layout, and we set the exhaust fan and its ducting to the exterior. If you’re moving the toilet or shower drain, this is where that happens, and it’s where the roof and framing sometimes enter the conversation – homeowners often pair this with Roof Repair in Culver City when an exhaust run or skylight opens the roof deck. Inspection usually happens before drywall closes everything back up.
Stage 3: Framing, waterproofing and subfloor (days 6 – 9)
We level the subfloor, add blocking for grab bars and any floating vanity, and apply the waterproofing membrane to wet areas. This is the stage that decides whether a shower leaks in year four. We use cement backer board with a liquid-applied or sheet membrane, never greenboard behind tile.
Stage 4: Tile, grout and fixtures (days 9 – 16)
Wall and floor tile go in, then grout, then the vanity, toilet, faucets and accessories. This is where the finish choices are locked, and where a $300 per-square-foot tile will visibly outclass a $30 one. Fixtures land around day 14 – 16 depending on lead times.
Stage 5: Punch list and final walkthrough (days 16 – 20+)
We silicone the seams, seal the stone, clean the glass and walk the room with you line by line. Anything that isn’t right gets fixed before final payment. Everything we do is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Weigh in a Full Bathroom Remodel
The same room can price at $11,000 or $26,000, and almost all of that spread lives in the finishes below. Here’s the honest trade-off on each.
- Tile selection: Porcelain ($4 – $9/sq ft) is durable, low-maintenance and the easy workhorse; natural stone like marble or travertine ($12 – $30/sq ft) is stunning but needs yearly sealing and shows water spots.
- Vanity: A stock cabinet is fast and inexpensive; a semi-custom unit from a name like KraftMaid fits the room better and holds value. Both are backed by the brand warranty.
- Fixtures: Kohler and similar mid-tier names are the sensible anchor. Builder-grade chrome works but won’t age well in a room that sees daily moisture.
- Waterproofing: A membrane system is the difference between a shower that lasts 20 years and one that needs repair in 5. We never skip it.
- Layout: Keeping the existing toilet and shower locations is significantly cheaper than relocating plumbing under a slab.
What Full Bathroom Remodeling Costs in Culver City, CA
Expect $9,000 – $28,000 in Culver City. The most common arrangement – one full bathroom at roughly 60 – 80 sq ft, no plumbing relocation, mid-tier tile and fixtures – typically lands around $16,000 – $21,000. Four things push a job to the top of that range.
- Existing condition: Galvanized pipes, an undersized subfloor or mold behind tile can add $2,000 – $6,000 in hidden work.
- Plumbing and electrical relocation: Moving a drain or adding a circuit adds $1,500 – $4,000.
- Material grade: Stone tile, a custom vanity and designer fixtures can add $5,000 – $9,000 over a stock build.
- Permit scope: A permit that covers plumbing or structural work means city review and inspection, both of which are baked into that $500 – $1,500 line in your written estimate.
Every written estimate lists demo, materials, labor, permits, disposal and finish options line by line. If a number isn’t in writing, it isn’t part of the price. 0% financing for 18 months and $1,000 off projects over $10,000 are available on qualifying jobs.
See the difference
Before
After
Before
After
Before
AfterWhat Culver City Homes Specifically Do to This Job
Culver City’s housing stock sits in a tight footprint of 1920s – 40s Spanish bungalows in Carlson Park, Culver Crest and Sunkist Park, plus a band of 1950s – 60s ranchos and dingbats closer to Sepulveda and Washington. The 90232 and 90230 ZIP codes cover most of it. What that means for a full bathroom remodel: the original houses often have wood lath under the tile, undersized or missing subfloor framing, and plumbing that has already been patched twice. We plan on additive framing, and we price it into the estimate rather than the change order. Add the persistent ocean moisture the basin holds, and stucco and wood-detail problems show up around windows and corners you’d otherwise leave alone. Nothing in a full bathroom remodel in Culver City is difficult. It’s just that the houses are 80 years old and weren’t built for modern plumbing loads. We schedule on that reality, and we pull the permits and pass the inspections.
Serving Culver City, CA – Our Local Coverage Area
We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Full Bathroom Remodeling in Culver City
Plan on 3 – 5 weeks of working time. The biggest variable is what we find behind the tile on demo day – original lath, old plumbing or missing subfloor can add a week. Call (888) 427-1733 to get a schedule sized to your specific room.
Yes, when plumbing, electrical or structural work is involved. We handle the permit application, the inspection scheduling and the sign-off. Cosmetic-only updates (new tile over a sound substrate, paint, a vanity swap with no plumbing move) can sometimes proceed without one, but we confirm that on site.
Usually. Keeping the toilet, shower and sink in roughly the same positions saves $1,500 – $4,000 and shortens the schedule. If the layout genuinely needs to change, we price the relocation clearly before you commit.
$9,000 – $28,000. A mid-scope project with stock-to-semi-custom finishes typically lands near $16,000 – $21,000. Call (888) 427-1733 for an exact figure – the on-site estimate is free.
Our 730-Day Done Right Promise covers workmanship for two full years. If a tile pops, a seam leaks or a fixture fails on our install, we come back and fix it. Brand warranties on Kohler, KraftMaid and similar partners ride on top.
Get a Free Full Bathroom Remodeling Estimate in Culver City
Call (888) 427-1733 and a live person answers, day or night. We’ll set a walkthrough at your place in Culver City, take measurements, talk through tile and fixture options, and hand you a written line-item estimate within a few days. No pressure, no vague number scribbled on a business card. If you’re weighing a larger scope, our Bathroom Remodeling in Culver City page and the broader Bathroom Remodeling service overview show how this job fits into the wider project.
Written by the team at Groundwork Construction Co.